Search
1976 articles for “MEC” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Design and Development of Fiber Sandwiched Composite Materials for the Improvement of Mechanical Properties
Abstract: This research paper presents the development and mechanical characterization of fiber sandwiched composite materials (FSCM) to address the increasing demand for high-strength, lightweight, and corrosion-resistant materials in advanced engineering sectors such as automotive, aerospace, and transportation industries. Traditional homogeneous materials such as metals, ceramics, and polymers often fail to provide a balanced combination of properties like high tensile strength, low density, toughness, abrasion resistance, and impact resistance needed for modern …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 1, 2026 · pp. 22–37 Read article
-
Fundamental Principles of Fluid Behavior and Emerging Trends in Modern Fluid Mechanics Research
Abstract: Fluid behavior forms the foundation of numerous engineering technology and scientific applications, including aerospace flows, energy systems, and environmental processes. This paper presents a comprehensive overview of the fundamental principles governing fluid behavior, with a strong emphasis on their relevance to recent trends in fluid mechanic’s research. Core concepts such as fluid statics, fluid dynamics, and conservation laws are discussed to establish a solid theoretical framework. The study further examines …
Published in Recent Trends in Fluid Mechanics · Vol. 13, Issue 1, 2026 · pp. 14–21 Read article
-
Recent Trends in Fluid Mechanics with Emphasis on Aeroacoustics and Flow-Induced Noise Control
Abstract: Fluid mechanics continues to evolve rapidly due to increasing demands in aerospace, automotive, energy, and environmental engineering applications. Recent trends in this field highlight significant advancements in both theoretical understanding and practical implementations, particularly in complex flow phenomena. Among these, aeroacoustics and flow-induced noise control have emerged as critical research areas due to their direct impact on system performance, efficiency, and environmental sustainability. Aeroacoustics deals with the generation, propagation, and …
Published in Recent Trends in Fluid Mechanics · Vol. 13, Issue 1, 2026 · pp. 32–38 Read article
-
Evaluation of Mechanical Behaviour of Tungsten Carbide and Magnesium Reinforced Aluminium Matrix Composites
Abstract: With industries like automotive and aerospace also being more inclined on the lightweight material and strength that is much substantial, the aluminium-based metal matrix composite has become a major focus of interest. This paper examines the influence of addition of tungsten carbide (WC) and magnesium (Mg) particles on the mechanical characteristics of Al6063 aluminium alloy. The crucible casting technique was made in two composite compositions 2.5 percent and 5 percent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1–8 Read article
-
Effect of Barium Sulphate on Mechanical Properties of Woven Aloe Vera/Flax Reinforced Epoxy Composites
Abstract: Natural fiber-reinforced composites are becoming popular because of their lightweight, eco-friendly, and sustainable nature. Nevertheless, single-fiber composites tend to exhibit poor mechanical performance. This research paper has created a hybrid composite bonded with woven Aloe vera and flax reinforced with an epoxy bond. Barium sulphate (BaSO4) filler was added to further improve the properties. The fibers were subjected to sodium hydroxide (NaOH) to enhance bonding with the matrix and the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 355–365 Read article
-
Mechanical Behavioral Analysis of Sugarcane Bagasse, Coconut Fiber and Kevlar Fiber Reinforced Composite with Micrographs
Abstract: Asbestos and alloys are materials that are frequently used as brake pads; however, because these materials pose risks to human health and the environment, including lung cancer, it is necessary to replace the materials used in brake pads. In place of the current brake pads, composite fibers such as kevlar, sugarcane bagasse, and coconut are studied in this study. The procedure of manually laying up composite molding is used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 282–296 Read article
-
Mechanical Characterization and Machinability Optimization of Stir-Cast Al6061–SiC Metal Matrix Composites
Abstract: This study presents the fabrication, mechanical characterization, metallurgical analysis, and machinability optimization of Aluminum 6061 reinforced with Silicon Carbide (SiC) metal matrix composites (MMCs) at three weight fractions: 5%, 7.5%, and 10%. Composites were manufactured using the stir casting technique, followed by comprehensive mechanical testing (tensile, hardness, and impact), optical microscopy, and scanning electron microscopy (SEM). Machinability was assessed through turning experiments on a lathe using an L9 Taguchi orthogonal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 833–848 Read article
-
Fabrication, Mechanical Characterization, and Biodegradation Analysis of Polylactic-Acid-Based Composite for Medical Sutures
Abstract: Wound closure is surgical aids that relieve heavily on sutures, which help maintain proper tissue alignment and support healing. The effectiveness depends on factors such as the type of wound, required mechanical strength, risk of infection, and characteristics like absorbability and thickness of the martial. The efficacy of sutures is determined by their material properties and structural characteristics, which affect their mechanical properties. The primary objective of this study was …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 7–12 Read article
-
Copper Sulfide Semiconducting Nanoparticles for Antibacterial Applications: Synthesis Strategies, Mechanisms and Performance – A Review
Abstract: Copper sulfide nanoparticles (CuS NPs) have drawn growing attention as a next-generation antibacterial platform, owing to their tunable structural, optical, and catalytic properties. This review consolidates current evidence on CuS NP synthesis, mechanisms, and antibacterial performance, comparing chemical and green synthesis routes alongside the effects of morphology, doping, and surface modification. Mechanistically, CuS NPs act through several overlapping pathways, including reactive oxygen species generation, bacterial membrane disruption, ion release, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 236–253 Read article
-
Comprehensive Study on the Mechanical and Tribological Response of Waste Tyre Rubber–Natural Fiber Hybrid Epoxy Composites
Abstract: Research into the mechanical and tribological characteristics of Prosopis juliflora-fiber reinforced epoxy-matrix composites with recycled tyre rubber particles is the focus of this investigation. Making use of old tire rubber and bio-reinforcing with fibers from the common invasive plant Prosopis juliflora are the goals of the two-reinforcement techniques. The end goal is to produce long-lasting, cost-effective engineered composite materials with improved performance. A constant epoxy resin matrix was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 154–161 Read article
-
Ultrasonic Dispersion of Halloysite Nanotubes for Enhanced Mechanical, Thermal, and Morphological Performance of Epoxy Composites
Abstract: Halloysite nanotube (HNT)-reinforced epoxy nanocomposites were prepared by mixing HNT with bisphenol-A epoxy (LY 556) using ultrasonication, followed by compression molding. HNT contents of 0–5 wt.% were used. The composites were evaluated for tensile strength, flexural strength, Shore D hardness, Izod impact strength, and thermal stability using thermogravimetric analysis (TGA). The fractured tensile surfaces were also examined to understand the failure mechanism and interaction between HNT and the epoxy matrix. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 212–226 Read article
-
Studies on Oil Extraction from Pongamia Seeds using Mechanical Expeller and Microwave Heating Technique
Abstract: The extraction of oil from seeds is carried out traditionally by using mechanical expeller. In this study, four configurations of oil extraction systems, namely, single screw, modified single screw, twin screw and microwave assisted oil extraction have been evaluated for oil yield and production or through put rate. Pongamia pinnata seeds have been used as the reference raw materials for this study, both in whole seed form and in crushed …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 7, Issue 3, 2016 · pp. 7–14 Read article
-
Mechanical Behavior of Epoxy-Phenol Formaldehyde Hybrid Blend
Abstract: Phenol formaldehyde resin was mixed with epoxy resin in different weight fraction (10–40) wt.% to form hybrid blends which are used as a new part in engine oil tank of the cars. The mechanical properties of the new blend were studied and included: impact strength, tensile strength, compressive strength and bending resistance. Results showed improved mechanical properties of epoxy resin after adding phenol formaldehyde. Keywords: Hybrid blend, mechanical properties, phenol …
Published in Journal of Catalyst & Catalysis · Vol. 4, Issue 2, 2017 · pp. 22–26 Read article
-
Study the Effect of Cement Waste on Some Mechanical Properties of Acrylonitrile-Butadiene Rubber
Abstract: The basic idea of this paper is to prepare and study the composite rubber material for the manufacturing of an important part in the grain transportation systems in silos of general company for grain trade namely rablat, where it was the experience of this rablat manufactured in the new silo of Hilla/Babylon province for a period of eight months in winches and vector chain was fully proven. In this paper, …
Published in Journal of Catalyst & Catalysis · Vol. 3, Issue 1, 2016 · pp. 11–14 Read article
-
Ru(III)-Catalyzed Oxidative Cleavage of Ritodrine Hydrochloride: A Kinetic and Mechanistic Study
Abstract: A systematic kinetic and mechanistic study of the oxidation of ritodrine hydrochloride (RTH) with chloramine-T (CAT) in both HClO4 and NaOH media has been carried out at 303 K. In acid medium, the reaction rate is very sluggish to be measured kinetically. Ruthenium (III) chloride ([Ru(III)]) was found to be an efficient catalyst. The reaction rate exhibits a first-order dependence on [CAT]0 in both media. It shows a fractional-order on …
Published in Journal of Catalyst & Catalysis · Vol. 1, Issue 1, 2014 · pp. 29–40 Read article
-
Automatic Tiles Unloading Mechanism: A Review
Abstract: In the era of Ceramic Industries Manufacturing process is done through automatic machines but in Ceramic industries where use manually unloading of Tiles from Kiln. Productivity improvement is the need of current market. This project is based on automatic Tiles unloading Mechanism and to create Design of Mechanism and Simulation of this Mechanism and I will make significant efforts to make attempt to solve challenges in manual tiles unloading system. …
Published in Journal of Mechatronics and Automation · Vol. 3, Issue 1, 2016 · pp. 1–4 Read article
-
Effect of Isothermal Ageing on Microstructure and Mechanical Behavior of 0.5Cr-0.5Mo-0.2V Low Alloy Steel
Abstract: Cr-Mo-V based low alloy steels are widely used in thermal power plants because of their ability to withstand elevated temperature and high pressure under continuous operation. With ferrite-pearlite and/or ferrite-bainite microstructures, these steels find their applications in boiler tubes, pressure vessels and steam turbines. Being cost effective is one of the important factors, which draws attention of many industrialists towards low alloyed steels over highly alloyed steels with austenitic matrix. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 5, Issue 3, 2015 · pp. 7–14 Read article
-
Studies on Mechanical, Thermal Properties, Characterization and UV-Accelerated Weathering of HIPS-PLA Blends using Glycerol as Compatibilizer
Abstract: AbstractHIPS (High Impact Polystyrene) was blended with PLA (poly lactic acid) in three formulations as 80:20, 65:35 and 50:50% (wt%) using a twin screw extruder and by using glycerol (4%) as compatibilizer. Test specimens were prepared by using an injection moulding machine and the mechanical, thermal and electrical properties were determined. The tensile strength first decreases and then increases with increasing percentage of PLA, but lower than that of both …
Published in Journal of Polymer & Composites · Vol. 5, Issue 2, 2017 · pp. 1–11 Read article
-
Effect of Different Fibers on Mechanical Properties of Polypropylene
Abstract: AbstractComposites have created a niche in today’s world market. Polypropylene is the second largely used plastic in the world. Polypropylene in its pure form cannot be used in many applications. Reinforcements are made into the pure polypropylene in order to enhance its mechanical properties. In the present paper, a review has been made on the recent advances for the various reinforcements being made into the polypropylene. The effect of fiber …
Published in Journal of Polymer & Composites · Vol. 5, Issue 2, 2017 · pp. 50–56 Read article
-
Effect of Nature of Short Fibers/Carbon Black on Curing Characteristics and Physico-Mechanical Properties of Ethylene Propylene Diene Monomer Rubber Composite
Abstract: AbstractIn this research work, ethylene propylene diene rubber (EPDM) composites were prepared by incorporating the various types of short fibers like cellulose, polyester, p-aramid, m-aramid, cotton short fibers and carbon black on a 2 roll mill. The effect of different short fibers content on the curing characteristics and physico-mechanical properties of EPDM composites were studied. When the loading of carbon black was fixed, it was found that carbon black content …
Published in Journal of Polymer & Composites · Vol. 4, Issue 2, 2016 · pp. 34–43 Read article