Search
317 articles for “Heat rate”
-
Analysis of an Evaporative Desiccant Cooling System
Abstract: With the drastic change in climatic conditions in recent years, demand for air conditioning is spreading all over the world. This causes a primary consumption of energy in high quantity. In order to provide the best indoor air quality and thermal comfort with minimum consumption of energy, the desiccant cooling system is one of the options in our daily life. In this work, a theoretical performance study has been done …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 2, Issue 2, 2015 · pp. 31–38 Read article
-
Design, Fabrication and Performance Evaluation of Economic Grain Dryer
Abstract: AbstractDrying of grains is very essential that is to be performed effectively and immediately after the harvest to retain the quality of the grain and to prevent infestation and germination. To achieve this objective an economic grain dryer made of available materials like air heater, air blower, feed regulator, and applicator was designed, fabricated and evaluated for its performance. Various parameters such as; relative humidity of hot air, air flow …
Published in Research & Reviews : Journal of Agricultural Science and Technology · Vol. 5, Issue 1, 2016 · pp. 1–7 Read article
-
Influence of Microcrack Healing on Interface Bond Shear Strength of Asphalt Concrete
Abstract: The flexible pavement layers are susceptible to cracks throughout its service life under the repeated loading and environmental impact. However, microcracks can heal itself through rest period and variation in temperature. In this investigation, the influence of microcrack healing on the interface shear strength of asphalt concrete was assessed. Two types of tack coat (rapid curing cutback RC-70 and cationic medium setting emulsion CMS) and three application rates have been …
Published in Trends in Transport Engineering and Applications · Vol. 7, Issue 2, 2020 · pp. 18–28 Read article
-
Comparative Study of Various Injection Methods for Reducing Engine Heat of Internal Combustion Engine
Abstract: To maintain a proper engine temperature and better combustion of internal combustion engine anexperimental study is conducted with mixing additional substance into the combustion chambermixed with petrol. The additional substance added are water, hydrogen and methanol. Out of thethree substances mixed with the fuel, the overall engine temperature and combustion is identified.The injection method is organized using a fuel injection system or by a carburettor. Three differentmethodswerestudied,includingmethanol,water,andhydrogen.Theenginewasnaturallyaspirated and operated at …
Published in Trends in Mechanical Engineering & Technology · Vol. 13, Issue 3, 2023 · pp. 7–17 Read article
-
Impact of Tool rotating speeds on the Mechanical characteristics of dissimilar friction stir-welded AZ80A-Mg – AA6061-Al joints
Abstract: In this investigation, separate AA6061-Al and AZ80A-Mg alloy plates were effectively joined through stir welding with friction. We looked closely at the weld joints' characteristics, especially their mechanical aspects. In the experiment, here were multiple tool rotating rates (rpm) of 800, 1000, 1200, 1400, and 1600 used. A cylindrical pin-equipped tool featuring a tapered profile was utilized, inserted into the AA6061 alloy plate is offset by 0.5 mm, while maintaining …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 161–168 Read article
-
Automation of Heat Exchanger System using DCS
Abstract: Heat exchangers are built for efficient transferring heat from one fluid to another. They have an extensive demand in areas such as petroleum, refineries, chemical plants, petrochemical plants, natural gas processing, refrigeration, power plants, air conditioning, space heating and process industry. Automation of Heat exchange can be done optimally using PID Block. Using PID function block the outlet fluid temperature can be maintained as desired. The automation of Shell and …
Published in Journal of Control & Instrumentation · Vol. 5, Issue 1, 2014 · pp. 22–28 Read article
-
Study of Contact Temperature During Polishing of Zinc Plate with Ultrasonic Vibration Using Single Pole Magnetic Abrasive Finishing
Abstract: The present work scrutinizes the impact of ultrasonic vibration on the contact temperature during polishing zinc plates with Single Pole Magnetic Abrasive Finishing (SPMAF). The efficacy and eminence of FMAB finishing are pointedly influenced by heat generation at the interaction point, as raised up temperatures can lead to the deprivation of abrasive elements or the bonding material inside the brush, which leads to the fading its overall effectiveness. The magnetic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1239–1247 Read article
-
Optimization of Window Sizes based on Different Climatic Conditions
Abstract: Different climatic conditions have an impact on a building's performance. Climate-related factors will also affect how energy-efficient a structure is. As a result, making comparisons between buildings in various climate zones will produce inappropriate results. It is crucial to understand how much a building's energy performance can vary depending on the climate. By running energy simulation on the typical building, the climatic condition ratio is established for various climate zones …
Published in International Journal of Environmental Planning and Development Architecture · Vol. 1, Issue 1, 2023 · pp. 33–43 Read article
-
Perspectives of 3D-Printed Polylactic Acid-Based Composites Reinforced with Natural Fibers
Abstract: The growing demand for sustainable and biodegradable materials has led to the development of polylactic acid (PLA)-based composites reinforced with natural fibers. This study investigates the mechanical, thermal, printability, and environmental performance of 3D-printed PLA/Natural Fiber composites, addressing key challenges in fiber-matrix compatibility, structural integrity, and biodegradability. Natural fiber reinforcement enhanced Young’s modulus and flexural strength, but excessive fiber content led to agglomeration, reduced tensile strength, and increased brittleness. Thermal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 649–664 Read article
-
Polymer Composite-Enhanced Anaerobic Digestion of Kitchen Waste for Optimised Biogas Production: Process Design, Parametric Study, and Simulation Analysis
Abstract: There is an urgent need for decentralised sustainable biogas production from organic waste due to the rising amount of food waste in cities. The application of polymer composite material including HDPE tanks, PVC pipes, and FRP secondary containment systems presents a promising option compared to conventional MS digester fabrication in terms of durability, excellent thermal insulation capability, light weight, and easier installation. This study explores the possibility of adopting a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 803–818 Read article
-
Performance Optimization of Reflectors Integrated Flat Plate Solar Collector for Water Heating
Abstract: As the demand for energy is increasing day by day, so to compensate that they use renewableenergy is the best choice in these days. Solar energy is one of the best renewable energyresources. A flat solar collector is using to heat water for domestic as well as commerciallevels. In this research, optimization of the thermal efficiency of a flat solar collector is done,reflector angle, day time and flow rate are …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 11, Issue 3, 2020 · pp. 24–32 Read article
-
A simulation based study of Capacitor-less Low-Dropout Regulator (LDO)
Abstract: Low-dropout (LDO) regulators have become an essential part of IC design for managing power consumption, this used large capacitors which increases the pin count and also occupies more space in chip. As the order of electronics items increses the the demand of LDO also increases.This is used used with switching regulators to defeat the value of noise and various unwanted signals and provided a low noise output In this work …
Published in Journal of Microelectronics and Solid State Devices · Vol. 8, Issue 3, 2021 · pp. 11–15 Read article
-
Design of Evaporator and Condenser for Solar Adsorption Refrigeration System
Abstract: Solar adsorption refrigeration systems provide a promising alternative for sustainable cooling in regions with limited grid access and high solar availability because they can convert low-grade thermal energy into refrigeration without mechanical compression. The performance of such systems depends strongly on the thermal behavior of the evaporator and condenser, since these components govern the refrigerant evaporation rate, condensation effectiveness, and overall cycle stability. This paper presents focus on the design …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 13, Issue 2, 2026 · pp. 1–10 Read article
-
Evaporative Cooling By Using Different Porous Materials
Abstract: The method of evaporative cooling involves raising the air temperature by causing water vapour in an airstream to evaporate. Waterneeds the latent heat of vaporisation to evaporate, and this heat is produced by ambient air and a drop in air temperature. A porousmedium is necessary for both direct and indirect evaporative cooling in order to allow heat and mass transfer between the medium'swater and the air moving through it, or …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 9, Issue 2, 2022 · pp. 29–37 Read article
-
Evaluating The Durability and Environmental Sustainability of Hybrid Natural - Synthetic Fiber Composites
Abstract: This study examines the characteristics of hybrid composites composed of natural fibers (such as jute, hemp, or kenaf) and synthetic fibers (such as glass or carbon) integrated within polymer matrices. The hybridization method seeks to enhance the advantages of both fiber types, hence augmenting overall performance relative to single-reinforced composites. Mechanical properties like tensile strength, flexural strength, impact resistance and hardness were evaluated through experimental tests. The results demonstrate that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 93–102 Read article
-
Structure-Property-Process Relationships in BNNS-Modified PEEK Nanocomposites for High-Performance Applications
Abstract: This study reports the design and performance evaluation of boron nitride nanosheet (BNNS)-reinforced polyetheretherketone (PEEK) nanocomposites fabricated using melt compounding and high-temperature Fused Filament Fabrication (FFF). PEEK, a high-performance thermoplastic, was reinforced with BNNS at 0.5–5wt.% to enhance mechanical, thermal, and tribological functionalities for advanced engineering use. Composite filaments were extruded and printed using a modified Bambu Lab FFF printer. Mechanical testing revealed a peak tensile strength of 108 MPa …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 867–888 Read article
-
AI-Driven IoT Ecosystems for Real-Time Thermo-Chemical Decision Making
Abstract: The efficient management of thermo-chemical processes is a critical challenge in modern industry, where maintaining precision, operational safety, and energy efficiency directly influences productivity and sustainability. The convergence of the Internet of Things (IoT) and Artificial Intelligence (AI) has transformed conventional industrial systems into intelligent, data-driven environments capable of continuous monitoring, predictive analysis, and autonomous decision-making. By integrating interconnected sensors, edge computing, cloud platforms, and advanced machine learning algorithms, industries …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 4, Issue 2, 2026 · pp. 10–15 Read article
-
Design of a Process Plant for Dimethyl Ether Synthesis from Syngas Using Direct Method
Abstract: The search for alternative renewable and less polluting energy sources has gained prominence thus, there is an increasing interest in the use of Dimethyl Ether (DME) as a clean alternative fuel and raw material in the chemical industry. The simulation of a plant for the production of Dimethyl Ether from Syngas using direct synthesis method has been carried out in this work. The simulation was done using ASPEN HYSYS software. …
Published in Journal of Petroleum Engineering & Technology · Vol. 13, Issue 1, 2023 · pp. 44–59 Read article
-
Analysis of C45 Steel Machining with Differentiated Tool Bits
Abstract: The tool material may be coated or uncoated, and cutting inserts are typically situated along the covered contact region. Work piece remains fixed while tool revolves for cutting and machining. Objective: A NABL-accredited metallurgical evaluation laboratory (machining) assessed two specimens. Machining profile and materials determine insert selection. Analytical results show material composition. The surface qualities of samples 1 and 2 were examined. As DOC, cutting speed and tool tip temperature …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 244–252 Read article
-
Enhance the Thermal Performance and Fluid Flow Behavior in Micro-Tube Heat Exchangers with Variable Fluid Properties for Cooling Applications
Abstract: This paper focus on the substantial effects of fluid property changes and phase change events, this study provides a comprehensive transient assessment of the heat exchanger's thermal performance and fluid flow behaviour for cooling and dehumidification applications. In response to a step-change perturbation, a dynamic model was created and co-simulated to describe the moist air (shell-side) and the two-phase refrigerant (tube-side), as well as their non-linear interactions. The significant correlation …
Published in Journal of Thermal Engineering and Applications · Vol. 13, Issue 2, 2026 Read article