Search
402 articles for “Cementation”
-
Effect of Polymer Modified Fibers on Strength of Concrete
Abstract: AbstractThe results of an experimental investigation to study the effects of hooked steel fibers with varying dosage and polymer latex with fixed dosage in concrete are studied. In this experimental study, varying volume fraction of hooked steel fibers from 0% to 7% by weight of cement at the interval of 1% of fiber and SBR latex polymer of fixed volume of 15% by weight of cement were used. All specimens …
Published in Journal of Polymer & Composites · Vol. 3, Issue 1, 2015 · pp. 15–24 Read article
-
Microstructural Investigation on Strength of New Age Mortar Synthesis with Thermosetting Polymer, GGBS, Fly Ash and Quarry Dust
Abstract: AbstractThermo setting polymer mortars containing Resin, hardener, fly ash, Quarry dust and GGBS (Ground Granulated Blast furnace slag). Merging representation of bio phenol-A-Di-glycidyl ether-based polymer with fly ash, Quarry dust and GGBS results are presented here for this present study. An innovative process is used to prepare the specimen in mild condition with commercial thermo setting polymer-based resin and hardener, fly ash, GGBS, along with quarry-dust-based paste. Following this procedure, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 63–71 Read article
-
Compressive and Tensile Behavior of Lime Added Geopolymer Concrete.
Abstract: Concrete is the most used material, which required large quantities of Ordinary Portland Cement (OPC). OPC production is held responsible for some of the CO2 emissions, which polluted the atmosphere. Hence, it is inevitable to find an alternative material to OPC. Geopolymer concrete is a best alternative which shall be produced by the chemical action of inorganic molecules. This paper focuses fly-ash based Geopolymer concrete with addition of lime. In …
Published in Journal of Structural Engineering and Management · Vol. 6, Issue 3, 2019 · pp. 1–11 Read article
-
Use of waste paper sludge and polypropylene to study the performance of concrete
Abstract: A large quantity of waste paper is generated from the offices and industries of the paper mill and it needs to be disposed off through proper waste management system or effectively reutilized in construction industry. Hypo plant in the paper industry generates large volume of waste in the form of slurry, disposal of which causes environmental problems. The increasing amount of waste is a concerning reality that arose various sustainability …
Published in Journal of Structural Engineering and Management · Vol. 7, Issue 2, 2020 · pp. 11–20 Read article
-
Experimental Study on Strength and Setting Time of Concrete After Modifying Workability by Using Molasses as Time Retarding and Plasticizing Agent
Abstract: Molasses is a byproduct recovered from the sugar refining process. Molasses can also be recovered from the paper industries. Here the waste floating on the surface of boiling sugar juice during the process of production of sugar is taken. Sugar content in such molasses slows down the hydration process in cement. This phenomenon increases the setting time of the concrete mix. Among the quantity of water added to concrete without …
Published in Journal of Structural Engineering and Management · Vol. 2, Issue 2, 2015 · pp. 1–5 Read article
-
Development of Controlled Concrete by using Hypo Sludge
Abstract: Over 300 million tones of industrial wastes are being produced per annum by chemical and agricultural process in India. These materials pose problems of disposal and health hazards.The wastes like phosphogypsum, fluorogypsum and red mud contain obnoxious impurities which adversely affect the strength and other properties of building materials based on them. Out of several wastes being produced at present, the use of phosphogypsum, flurogypsum, lime sludge, hypo sludge, red …
Published in Journal of Structural Engineering and Management · Vol. 1, Issue 1, 2014 · pp. 16–21 Read article
-
A Preliminary Study on Biopolymerised Concrete with Sawdust as an Admixture
Abstract: In this study bio polymer obtained from Tapioca starch and sawdust in fine form were assessed for the use as partial replacement of cement materials for an application in lightweight concrete. Physical and chemical characteristics of bio polymer and sawdust were analyzed initially. Properties of concrete that has been investigated were compressive, tensile and flexural strength. The cement has been replaced by bio polymer and saw dust accordingly in the …
Published in Journal of Structural Engineering and Management · Vol. 1, Issue 2, 2014 · pp. 1–4 Read article
-
Strength and Durability of Steel Fiber Reinforced Concrete: A Review
Abstract: AbstractConcrete is essential construction material, since it is brittle in nature so the addition of steel fiber provides some ductility to the composite also the replacement of cement with other cementitious materials gives both environmental and economical benefit. Sometimes in adverse conditions concrete has to face some chemical attacks which affect the durability of concrete. This paper deals with the detailed literature review and explores the techniques to find the …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 1, 2018 · pp. 34–40 Read article
-
Nano-additives in Concrete: Present Scenario and Challenges
Abstract: This research work reviews on nanomaterials in concrete. Now, the conventional concrete properties of nanomaterial utilization have been introduced various attentions to increase. Ultimately, as an introduction, nanomaterial is increasing the strength and durability of the concrete. The nanomaterial is defined as the material that includes the particle size which smaller than 200 nm. Nanomaterials must be at least 500 nm in size. During the research of concrete in the …
Published in Recent Trends in Civil Engineering & Technology · Vol. 9, Issue 3, 2019 · pp. 11–20 Read article
-
Experimental Investigation of Plastic mix Concrete for Pavement Quality Concrete (PQC)
Abstract: ABSTRACT: This project is particularly dealt with the possibility and analysis of using waste Polyethylene Terephthalate (PET) in M40 grade of concrete (from IRC 44) as a partial replacement of fine aggregate with varying percentage of 0%, 2.5%, 7.5%, 12.5%. Various tests performed on cement-like specific gravity, fineness, setting time, standard consistency, etc. on coarse aggregate such as sieve analysis, fineness modulus, specific gravity, etc. On fresh concrete-like slump cone …
Published in Recent Trends in Civil Engineering & Technology · Vol. 10, Issue 2, 2020 · pp. 30–37 Read article
-
Experimental Investigation on Concrete with Replacement of Fine Aggregate from Scrap Tyre Rubber Dust
Abstract: Concrete is the most widely used construction material in the world in which cement and aggregates are the main constituents. This has led to continuous and increasing demands of natural materials used in the construction. Present study aims to explore the potential utilization of scrap tyre rubber in various Portland cement concrete categories for the production to study the structural behaviour of concrete, and to help partially solving environmental problem …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 2, 2017 · pp. 5–9 Read article
-
Strength and Durability Properties of Metakaolin Amalgamated High Performance Concrete
Abstract: In past three decades, it is inevitably for the development of high strength concrete (HSC) and high performance concrete (HPC) is progressively enhanced, since these concrete are widely used throughout the world in most prominent projects like oil, bridges, multi-storey buildings and nuclear industries etc. In meticulous, the amalgamation of supplementary cementing material (SCM) or pozzolanic materials is vital when high strength and durability become the most desired properties of …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 2, 2017 · pp. 36–44 Read article
-
Mechanical Properties of High Performance Glass Fibre Reinforced Concrete with Super Plasticizer
Abstract: High performance concrete (HPC) has been used in various structures all over the world since last two decades. Glass Fibre Reinforced Concrete (GFRC) is a relatively new type of building material and it is being increasingly used in different countries. Glass-fibre reinforced concrete (GRC) is a material made of a cementitious matrix composed of cement, sand, water and admixtures, in which short length glass fibres are dispersed. The usage of …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 2, 2016 · pp. 11–16 Read article
-
Pond Ash: A Sustainable Building Material for Smart Cities
Abstract: Energy is the backbone of modern civilization of our country and thermal power plant is a major source of energy, in the form of electricity. Fly ash and pond ash are two by products of thermal power plant being produced at an alarming rate. Efforts are required to safely dispose it and if possible find better ways of utilizing it. Fly ash possesses pozzolanic character and it is being utilized …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 1, 2016 · pp. 53–59 Read article
-
Studies on Effect of Various Curing Methods in Glass Fibre Reinforced Geopolymer Concrete with 12 Molarity Alkaline Solutions
Abstract: Due to the increasing environmental impacts associated with ordinary Portland cement, need to develop alternative binders to make concrete, is steadily increasing. Geopolymer concrete is the result of the reaction of materials containing Alumino-silicate with concentrated alkaline solution to produce an inorganic polymer binder. Alkaline solutions used were Sodium Hydroxide and Sodium Silicate. This paper presents results of an experimental study on the compressive strength, flexural strength and split tensile …
Published in Recent Trends in Civil Engineering & Technology · Vol. 5, Issue 2, 2015 · pp. 1–7 Read article
-
Pore-structural Parameters of Concrete, their Inter-Relationship and Correlation to Compressive Strength
Abstract: An extensive literature review was carried out on various forms of pore structural parameters (pore diameters) of concrete such as critical pore diameter, mean pore diameter, and threshold pore diameter and their correlations to compressive strength of concrete. From the review of the literature, it has been observed that the inter-relationships among various forms of pore diameters and their correlation to compressive strength of concrete have not been discussed much …
Published in Recent Trends in Civil Engineering & Technology · Vol. 2, Issue 1-3, 2012 · pp. 102–112 Read article
-
Exploring the Influence of Rice Husk Ash on Compressive Strength: Experimental Investigations in Construction Materials
Abstract: This paper aims to know the effect of rice husk ash on compressive strength 6 molds were collected and laboratory tests were conducted in cooperation with private laboratories in Baghdad Governorate, Iraq. The tests were conducted for a period of 7 and 28 days, where the samples were divided into 1 control and 5 samples distributed on a different percentage from 5% to 25% of the rice husks. The compressive …
Published in Recent Trends in Civil Engineering & Technology · Vol. 13, Issue 1, 2023 · pp. 24–28 Read article
-
Influence of Polymer Additives on Physical Properties of Asphalt Concrete under Marshal, Flexure and Compressive Stresses
Abstract: AbstractThe polymer modified asphalt cement is used today to reduce early pavement distress and extend service life by enhancing adhesion, cohesion, and elasticity. This work studies the impact of polymer additives (SBS, LDPE, and rubber) to asphalt cement on the physical properties of asphalt concrete subjected to compression and flexure stresses, and Marshal volumetric properties. Asphalt concrete cylindrical specimens of 101.6 mm diameter and 127 mm height for compressive strength …
Published in Trends in Transport Engineering and Applications · Vol. 4, Issue 3, 2017 · pp. 8–17 Read article
-
Feasibility of Using Nondestructive Testing (NDT) in Roller Compacted Concrete Quality Assessment
Abstract: Roller compacted concrete is a no slump, heavy duty concrete usually used in pavement constructed of roadway, parking lots, in areas of frozen environment or aired region where there is shortage of water for curing, and when other paving alternatives do not satisfy the pavement design requirements regarding heavy loading, and nonstandard wheel configuration. The traditional testing e slab samples have been prepared in the laboratory using two types of …
Published in Trends in Transport Engineering and Applications · Vol. 2, Issue 3, 2015 · pp. 30–39 Read article
-
Rut Depth Modeling of Modified and Unmodified Asphalt Mixtures by Using Finite Element Approach
Abstract: Two asphalt cements (PG76-22 and PMB PG76-22) and two aggregate gradations used in the construction of surface and base courses were selected to study their effect on the mixtures’ rutting behavior. A dynamic modulus and wheel tracking tests were performed to determine the rutting potential of asphalt mixtures at different temperature levels. The study revealed that modified asphalt cement (PMB PG76-22) with coarse aggregate gradation (base course) may offer more …
Published in Trends in Transport Engineering and Applications · Vol. 3, Issue 1, 2016 · pp. 65–78 Read article