Search
302 articles for “Composite Fabrication”
-
Fabrication of Belt for Backpack for Students to Reduce the Musculoskeletal Disorders using ABS material 3D Printing
Abstract: In the present study, the design and development of a composite-based belt aim to reduce the excessive burden on the backs of schoolchildren, which often leads to musculoskeletal disorders (MSD). The belt is designed using CATIA 3D modeling software and fabricated on an FDM-based 3D printer with ABS polymer. The design process focuses on addressing physical stress caused by heavy backpacks and prolonged use of electronic devices, both of which …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1110–1117 Read article
-
Characterization of Al6082 and Magnesium AZ3lB Composite Produced by The Friction Stir Additive Manufacturing
Abstract: In this modern era, lighter and stronger materials are needed. This is especially true for materials needed in aerospace, robotics, light aircraft, defence, and transportation. When comparison to backbone products in order composite goods have a higher durability & stiffness-to-weight proportion .Most of the newer fabricating methods, called friction stir additive manufacturing (FSAM), uses solid-state drives friction stirring technology to produce bilayer structures by sequentially fusing discrete strata. In this …
Published in International Journal of Manufacturing and Production Engineering · Vol. 1, Issue 1, 2023 · pp. 1–14 Read article
-
Interfacial Engineering of Carbon Fiber/Epoxy Laminates Using Functionalized Graphene Nanoplatelets: Experimental and Numerical Study
Abstract: Current research work studies the influence of amines(–NH₂) and carboxyl(–COOH) functionalized graphene nanoplatelets on the mechanical and thermomechanical behavior of unidirectional hybrid composite. Composites having different graphene concentration from 0 to 0.7 wt% were fabricated, characterized and analyzed for multiple testing - tensile testing, dynamic mechanical analysis (DMA) and Fourier transform infrared spectroscopy (FTIR). Tensile testing indicates better elastic modulus and tensile strength due to efficient load transfer between nanoparticles …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 61–77 Read article
-
Testing of Efficiency of Wind Turbine Blade NACA2415 Aerofoil Type Using Recycled Carpet Waste Polymer Composite Material
Abstract: In 2020, over 50% of residential properties in the United States were outfitted with carpet flooring, boasting an average longevity ranging from 10 to 18 years. Carpets are crafted from various fibers, including woven nylon, polyester, polypropylene, or wool fibers. Historically, nearly 6 billion pounds of discarded carpets were directed to landfill sites, perpetually undergoing decomposition processes. My current project entails the fabrication of a wind turbine blade utilizing a …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 314–324 Read article
-
AI-Driven Prediction of Square-Hole Laser Trepanning Performance in AA7075/15%SiC/15% Glass Fiber Hybrid Composites Using Taguchi–ANOVA and Deep Neural Networks
Abstract: Hybrid AA7075 composites reinforced with 15% silicon carbide (SiC) and 15% glass fiber were fabricated via the stir casting technique to improve machining and structural performance. The addition of dual reinforcements into the aluminum matrix was aimed at enhancing hardness, thermal stability, and surface quality during non-traditional drilling operations. Square-hole drilling was performed using a laser trepanning process, and the key responses—hole size accuracy, surface roughness, and taper angle—were systematically …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1932–1943 Read article
-
Advancements in Material Design and Motion Control: Integrating Additive Manufacturing, Fused Deposition Modeling, and Precision Systems in Modern Applications
Abstract: The interaction between material design, mechanical properties, and advanced motion control systems is vital in a range of engineering domains, including robotics, electronics, and manufacturing. This article examines two key areas: the mechanical properties and design of cutting-edge materials, focusing on composites, polymers, ceramics, and fibers, and the integration of advanced motion control systems in hand-held electronic and photographic devices. The first section delves into the mechanical behavior of various …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 2, Issue 2, 2024 · pp. 26–30 Read article
-
Implement Explainable Machine Learning to Improve Conductivity in Polymer-CNT Nanocomposites: Supporting Adaptive, Flexible, and Long-Lasting IoT Wrap-Around Electronics Applications
Abstract: The rapid growth of Internet of Things (IoT) technologies requires electronic components that are adaptable, lightweight, and durable, and that can continue to function well in diverse contexts and circumstances. Polymer–carbon nanotube (CNT) nanocomposites have become interesting choices for these kinds of uses because they are more flexible, conduct electricity better, and can be made to fit specific needs. However, improving conductivity in these heterogeneous systems remains a major challenge …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 238–254 Read article
-
Polymer-Nanowire Hybrid Composites Based on PEDOT: PSS and AgNWs for High-Performance Conductive Films in Flexible Devices
Abstract: The growing demand for flexible photovoltaic and wearable optoelectronic devices has intensified research into polymer-based conductive composites that provide transparency, flexibility, and electrical efficiency. In this work, we report the fabrication and characterization of a hybrid polymer nanocomposite electrode comprising silver nanowires (AgNWs) embedded within a PEDOT:PSS matrix, deposited on flexible polyethylene terephthalate (PET) substrates. The PEDOT:PSS polymer phase, modified with 5 vol% dimethyl sulfoxide (DMSO) and 0.1 vol% Zonyl …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 236–250 Read article
-
Investigating the Mechanical Properties and Microstructure of AA 7074 Composites with Silicon Nitride Reinforcement
Abstract: This study investigates the mechanical and microstructural properties of AA 7074 aluminium alloy reinforced with 1%, 3%, and 5% by weight of silicon nitride (Si₃N₄), fabricated via the stir casting method, intended for structural aerospace applications. A thorough series of mechanical tests—comprising tensile, compression, hardness, impact, flexural, and wear tests—was performed to assess the influence of differing reinforcing content. The composite containing 5 wt% Si₃N₄ (SN5) demonstrated the most pronounced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 268–281 Read article
-
Marine Algal Microfiber and Agro-Waste Reinforced Crosslinked Polymer Composites for Sustainable Coastal Materials
Abstract: Crosslinked bio-polymer composites reinforced with marine algal microfibers and agro-waste fillers were fabricated and systematically characterized for sustainable coastal applications. Mechanical testing revealed that tensile strength increased from 18.5 MPa for neat polymer to 25.1 MPa at 20 wt.% reinforcement (~35% improvement), while the flexural modulus improved from 0.72 GPa to 1.02 GPa (~42% increase). Impact strength, however, decreased from 3.8 kJ/m² for neat polymer to 2.9 kJ/m² at 30 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 210–223 Read article
-
Investigation of Mechanical and Thermal Behavior of Glass Fiber–Enhanced PEEK Parts Produced via Fused Filament Fabrication
Abstract: This study investigates the thermal and mechanical properties of Polyetheretherketone (PEEK) polymer and Glass Fiber (GF) reinforced PEEK polymer fabricated using the Fused Filament Fabrication (FFF) process. Specimens were printed in three building orientations—X, Y, and 45°—to evaluate the influence of layer deposition on polymer material performance. Tensile and flexural tests revealed that GF-PEEK polymer exhibited significantly higher Ultimate Tensile Strength (110 MPa in X-orientation), Young's Modulus (4.5 GPa), and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 65–78 Read article
-
Mn Doping–Induced Enhancement of Ethanol Gas Sensitivity in CuO/Cu₂O/Cu Composites
Abstract: A composite of CuO/Cu2O/Cu was synthesized by heating cupric acetate up to 600 °C for 2 hours in air. The properties of pure CuO films and CuO/Cu2O/Cu films were compared. Films were fabricated by the doctor blade method. Polyethylene glycol was used as a binder to prepare films. Mn was doped to composite to enhance the gas sensing properties. Compositions of Mn doped samples were confirmed using XRFS. According to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 52–61 Read article
-
Polymer Composite-Enhanced Anaerobic Digestion of Kitchen Waste for Optimised Biogas Production: Process Design, Parametric Study, and Simulation Analysis
Abstract: There is an urgent need for decentralised sustainable biogas production from organic waste due to the rising amount of food waste in cities. The application of polymer composite material including HDPE tanks, PVC pipes, and FRP secondary containment systems presents a promising option compared to conventional MS digester fabrication in terms of durability, excellent thermal insulation capability, light weight, and easier installation. This study explores the possibility of adopting a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 803–818 Read article
-
Axial Compression Behavior of Aluminum (Al), Glass/Epoxy (GFRP) and Hybrid Al-GFRP Crash-box: An Experimental and Digital Image Correlation Approach
Abstract: The study aims to understand the axial compression characteristics and fracture of cylindrical Aluminum (Al), Glass/epoxy (GFRP) composite and Hybrid Al-GFRP crash-boxes. The hollow Al tubes are fabricated by rolling and bonding a thin aluminum sheet followed by rivet joints. The GFRP samples are manufactured using the wet-hand layup technique followed by the vacuum bagging method. Hybrid samples are manufactured by covering GFRP tubes with aluminum sheets on the outer …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 304–313 Read article
-
Photonic Polymer Composites for Light-Modulating Displays and High-Throughput Optical Data Transmission
Abstract: The combination of PMMA-based composites recently received substantial attention from the photonic applications field since these materials combine excellent optical transparency, mechanical flexibility and straightforward fabrication capabilities. The material performance of pure PMMA requires functional additives because it shows limited thermal properties and optical attenuation in addition to sensitivity against UV rays. The research explores developmental pathways for PMMA composites through combined use of nanoparticles and electro-optic polymers with dopants …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 838–860 Read article
-
Experimental investigation on impact resistance and energy absorption of multicell thin walled glass fibre reinforced polymer composite
Abstract: The objective of this study is to explore the behaviour of different types GFRP cell structures under dynamic load testing. In this study we have designed, fabricated, tested and analyzed specimens of different configurations (Cylindrical structure – 1 cell, 2 cell and 4 cell) using Glass Fibre Reinforced Polymer (GFRP). GFRP constituents are Glass fibre of 200 GSM with L-12 epoxy and K-6 hardener. Test specimens were manufactured by conventional …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 85–95 Read article
-
Design and Structural Evaluation of a Dual-Axle Trailer Frame with a Focus on Increasing Strength While Aiming to Reduce Overall Weight
Abstract: The primary objective of this project is to evaluate various cross-sections and materials for the structural frame. The frame includes elongated side components and a central longitudinal member, which is connected to several cross-supports. The design focuses on optimizing both the cross-support layout and the choice of materials, incorporating composites to enhance performance. Load conditions are also altered to achieve improved efficiency. Static simulations are performed using ANSYS, while CATIA …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 2, 2025 · pp. 9–17 Read article
-
Eco-Friendly Tri-Layer Hybrid Composites: A Sustainable Approach to Polymer Matrix Materials
Abstract: In the current study, we explored the use of environmentally friendly natural fibers such as sisal, banana, and kevlar. These fibers were fabricated by hand lay-up technique, and their impact on tensile and dynamic properties was evaluated according to ASTM standards. The assessment was conducted under both dry and wet conditions, considering two different chemical dosage parameters for comparison. Additionally, the tri-layer fibers underwent two separate chemical treatments using 1% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 195–205 Read article
-
Development of Bio-Based Polymer Composites for Sustainable Construction Materials
Abstract: The demand for eco-friendly sustainable construction materials has gained significant interest in the development of bio-based polymer composites as ecologically suitable alternatives to traditional petrochemical-based polymer composites. The environmental problems associated with non-biodegradable, high-carbon-footprint polymer composites make their more bio-based counterparts an attractive option that offers both environmental and structural benefits. To evaluate environmental impact and industrial feasibility, a comprehensive life cycle assessment was performed. The methodology adopts optimized bio-based …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 194–208 Read article
-
Enhancing Performance of Hybrid Natural Fiber Reinforced Polymer: Insights into Processing, Characterization and Machining
Abstract: Natural fibre reinforced polymer composites (N-FRP) have gained popularity in recent years as an alternative to regular polymer composites, owing to growing environmental concerns. Natural fibers are becoming increasingly popular due to their outstanding properties such as flexibility, strength, compatibility with living creatures, and impact resistance. A notable application of natural fibers is in the medical industry, with the goal of producing cost-effective, sustainable, and long-lasting products. Combining different fibers …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 139–153 Read article