Search
1265 articles for “strength”
-
Experimental Study on Replacement of Cement and Fine Aggregate with Marble Dust and Copper Slag
Abstract: With the ever-growing challenge of managing escalating waste materials globally, this paper explores sustainable solutions in construction through the utilization of marble dust and copper slag. The rapid generation of waste poses severe environmental and health threats, necessitating innovative strategies for responsible waste management. Local availability and the potential to enhance concrete strength make marble dust and copper slag attractive candidates for the partial replacement of cement and fine aggregate. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 169–176 Read article
-
Investigation on the mechanical characteristics and productivity of GGBS based geopolymer mortars
Abstract: It has been known for decades that geopolymer will significantly replace cement's function in construction industry. Geopolymer has low creep and shrinkage and a peak compressive strength. That is as per a recent study, geopolymer mortar is made by Fly ash and GGBS. The composition includes (100-60%) GGBS with a 10% substitution of fly ash. Alkali activators used in the research are sodium hydroxide (NaOH) and sodium silicate (Na2SiO3). In …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 253–264 Read article
-
A Review on Aerospace Materials and Metallurgy
Abstract: Aerospace metalworking is comparable to the foundation of both space travel and transportation. It involves the scientific design and application of metals and alloys to offer components with the strength required for flight and the ability to survive harsh environments. Although other alloys feature cobalt or iron as the main ingredient, nickel makes up most of alloys used in aeronautical applications. When exceptionally high strength is required in moderate-temperature settings, …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 2, Issue 1, 2024 · pp. 21–26 Read article
-
Improvement of mechanical properties for PMMA based Denture material
Abstract: Denture material properties can be improved by various fiber addition. The most often used denture materials are polymethyl methacrylate (PMMA) resins; nevertheless, they do not have a high flexural strength (FS). This investigation compared the mechanical characteristics of an injection-molded polyamide. Deflex, an additional injection-molded PMMA base material, SRIvocap, and a typical compression-molded PMMA (Meliodent). The flexural qualities (deflection, bending strength, and bending modulus) of 100 different denture base materials …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 155–165 Read article
-
To Study Properties of Concrete by Using Manganese Ore Aggregate
Abstract: Aggregate is one of the major ingredients of the concrete and the maximum part of strength of the concrete is governed by the aggregate. And thus, partial or total replacement of it can change the physical as well as the chemical properties of the concrete. Nowadays researchers are quite interested in obtaining the more durable and more resisting concrete to the diverse climatic conditions. In this research, aggregate is proportionately …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 2, 2024 · pp. 38–45 Read article
-
Impact of Composite Materials by Silica Fume and Fly Ash in Cement and Partial Substitution of Fine Aggregate Using Quarry Dust in Steel Fibre Concrete
Abstract: Mineral admixtures can be added to concrete to replace some of the cement, increasing its overall strength. Fly ash (FA) and silica fume (SF) are two often used mineral admixtures. A series of experiments were conducted to investigate the effect of adding varied amounts of fly ash and a consistent amount of silica fume on concrete strength by using the same amount of substitute for cement and the same water-binder …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 139–147 Read article
-
Numerical Investigation on Structural Behavior of RC Beam-Column Joints: Beam Weak in Shear
Abstract: This study presents a numerical investigation on structural performance of reinforced concrete (RC) beam-column joints (BCJ) with beam weak in shear subjected to cyclic loading. Retrofitting techniques are explored, utilizing Glass Fiber Reinforced Polymer (GFRP) for shear strengthening, in accordance with ductile detailing standards outlined in IS 13920:2016. The column and beam elements are designed following the guidelines of IS 456:2000. Various specimen scales, including full-scale, 2/3-scale, and 1/3-scale specimens, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 202–226 Read article
-
Microstructural Characterisation and Analysis of Mechanical Behaviour of Hybrid AA 7075/7178 Fabricated Using Die Casting Technique
Abstract: AA are being increasingly used in the field of structural engineering owing to their desirable mechanical properties coupled with their recyclable and sustainable nature, thus contributing significantly towards reduction of carbon footprints and development of circular economy. Till date numerous research projects have been prompted to investigate the structural performance of aluminium alloy structures and develop alternatives with enhanced performance parameters. AA 7xxx (Al-Zn-Mg-Cu) are being widely used in variety …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 441–451 Read article
-
Influence of Nozzle Temperature, Nozzle Diameter, and Layer Height on Tensile and Hardness Characteristics of 3D Printed CF-PLA
Abstract: This research investigates the mechanical characterization of CF-PLA (Carbon Fiber-reinforced Polylactic Acid) composite material produced using Fused Deposition Modeling (FDM) technology. The study investigates the impact of different machine parameters, like nozzle temperature, nozzle diameter, and layer height, on the tensile property and hardness of CF-PLA specimens. A total of 27 samples were produced, each with different combinations of nozzle temperature (190°C, 200°C, and 210°C), nozzle diameter (0.4mm, 0.5mm, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 674–681 Read article
-
Properties of Binary Waste Based Geopolymer Concrete Composite: A Review
Abstract: Concrete composite as construction material is utilized all over the world and it is not considered as eco-friendly because cement is provided as a binder in it. Therefore, replacing binder in concrete composite by alumina and silica rich by-products in presence of chemical activators give rise to geopolymer concrete composite which is eco-friendly in nature. Geopolymer concretes composite can be used to build a variety of structural configurations, have a …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 44–52 Read article
-
Performance Evaluation of Tympanostomus Fuscatus (Periwinkle) Shell Powder as Alternative to Silica Flour in High Temperature Well Cementing Operation
Abstract: The effect of high temperature on cement slurry is a problem in the oil and gas drilling industry. Over the years, silica flour was used to prevent the strength of cement that results from high temperature effect. But, the silica flour is imported and not environmentally friendly. Hence, the need for local material that can serve as alternative becomes imperative. periwinkle shell (Tympanostomus fuscatus) was tested in the laboratory to …
Published in Journal of Petroleum Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 1–11 Read article
-
Replacement of Fine Aggregate in Concrete Using Bakelite Powder: A Review
Abstract: This review explores the feasibility of incorporating Bakelite, a thermosetting synthetic polymer known for its durability, heat resistance, and insulating properties, as a partial replacement for fine aggregate in concrete. The increasing focus on sustainable construction practices has driven interest in utilizing industrial waste materials like Bakelite to reduce environmental pollution while enhancing concrete performance. Bakelite, often discarded as industrial waste, presents an opportunity to improve the mechanical and durability …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 6–10 Read article
-
Assessment of Sustainable Composite for UAV structural Application
Abstract: Now-a-days aligned with global mission the growth of Unmanned aerial vehicle (UAV) application is enormous in the field of agriculture, defence, surveying etc., This research work investigates the improvement in strength of polymer matrix composite material of adding epoxy polymer resin with novel bio fibers such as Tamarindus and Morinda. The composite material was fabricated by using hand-layup method later its mechanical properties are analysed by numerical method as well …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 359–377 Read article
-
Investigation of Mechanical Properties of Hollow Bricks Incorporating Aerated Aggregates: A Polymer-Cement Composite Approach
Abstract: The rapid advancement of construction technologies has necessitated the development of lightweight, thermally efficient, and sustainable building materials. Hollow bricks, due to their inherent voids, offer substantial reductions in dead load and enhanced insulation properties. However, their mechanical performance often falls short when compared to conventional solid bricks. To address this limitation, this study explores the synergistic integration of aerated aggregates and polymer-cement composites (PCCs) in hollow brick production. Aerated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 92–105 Read article
-
Comparative Analysis of Eco Friendly Brick with Red Bricks
Abstract: This research presents a comparative analysis between conventional red bricks and eco-friendly bricks made from mud, rice husk, and dry plant leaves. The aim is to evaluate the potential of using sustainable, low-cost, and locally available agricultural waste materials in brick production as an environmentally conscious alternative to traditional methods. The eco-bricks were manufactured without kiln firing, significantly reducing energy consumption and carbon emissions. A series of laboratory tests—including compressive …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 · pp. 42–46 Read article
-
Effect of Heat Exposure on Structural Integrity of Geopolymer Concrete Composites
Abstract: The research evaluates the thermal degradation effects of high temperatures on Geo Polymer Concrete Composite (GPCC) by examining alccofine concrete, concrete made with alccofine and porcelain waste aggregates. Knowing how GPCC behaves under high temperatures proves essential for protecting buildings during fires as well as industrial applications. Each mix design received composite concrete samples that underwent increased heating conditions from 100°C to 700°C at 200°C intervals. Post-heating, various parameters were …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 318–328 Read article
-
Thermal Analysis of Natural Fiber and Hybrid Composites
Abstract: This study examines how natural fiber and hybrid composites reinforced with natural and glass fibers perform under thermal conditions specifically, the effects of temperature that are common in automotive and aerospace environments. To evaluate their behavior, the composites were tested at two elevated temperatures, 60°C and 70°C. Mechanical tests such as tensile and impact were conducted to simulate real-world operating conditions and assess how thermal, and moisture exposure influence the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1173–1196 Read article
-
Experimental Study on the Tensile Performance of Carbon Fiber Composites Reinforced with Titanium
Abstract: This research investigates the influence of titanium incorporation on the tensile and flexural behavior of carbon fiber‑reinforced polymer (CFRP) composites, with the goal of advancing their overall mechanical performance. This study investigates the effect of titanium incorporation on the tensile behavior of carbon fiber‑reinforced polymer (CFRP) composites to enhance their overall mechanical performance. The work aims to improve the structural efficiency of CFRP laminates by introducing titanium as a filler …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1729–1737 Read article
-
Investigation of Mechanical Properties of Banana, Linen and Their Hybrid Reinforced Composite Laminates in Adverse Condition and Analyze Using ML
Abstract: This research investigates the mechanical performance of composite laminates reinforced with banana and linen fibers, focusing on both individual and hybrid fiber combinations. The primary objective is to assess how these natural fiber composites behave under extreme environmental conditions, particularly high humidity and fluctuating temperatures, which are common in aerospace and automotive applications.Key mechanical properties—tensile strength, flexural strength, and impact resistance—are experimentally evaluated to assess the performance and long-term reliability …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 25–31 Read article
-
Process Optimization of Spot Welding for Galvanized Automotive Steel Sheets
Abstract: Resistance Spot Welding (RSW) is a pillar of the modern automotive industry with the usage of lightweight and high-strength products at the highest point of demand. The optimum weld quality of galvanized steel sheets which is a material of choice because of its additional corrosion protective property is however not achieved easily. This study is a well-developed data-based solution to designing the RSW process in the most efficient way, providing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 32–42 Read article