Search
203 articles for “Structural deformation”
-
Cubic B-splines for Isogeometric Analysis of Laminated Composite Plates Subjected to Hygroscopic Loading Using Classical Laminated Plate Theory
Abstract: Composite laminates are inevitably used in several engineering structures due to their high strength and stiffness to weight ratio. The laminates are subjected to change in moisture content and the flexural behavior leads to change in the strength. Presence of moisutre may induce residual stresses and strains. Isogeometric analysis is a well-proven method to perform analysis of laminated composite plates. The main focus of this study is to apply isogeometric …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 19–32 Read article
-
Analysis of Seismic Response of 3-D Steel Frame
Abstract: It is of critical importance that the structures that need seismic retrofitting are correctly identified, and an optimal retrofitting is conducted in a cost-effective fashion. Among the retrofitting techniques available, steel braces can be considered as one of the most efficient solution for seismic performance upgrading of RC frame structures. This paper investigates the seismic behavior of 3D-steel frame with different type of bracings for seismic loading condition corresponding to …
Published in Journal of Geotechnical Engineering · Vol. 2, Issue 2, 2015 · pp. 6–14 Read article
-
Effect of Strong Column Weak Beam Concept on Seismic Capacity of Buildings of Varying Heights: A Review
Abstract: The strong-column-weak-beam (SCWB) layout philosophy in which plastic deformation is authorized to arise most effective with inside the beams whilst the columns continue to be basically elastic is broadly followed in seismic layout codes for metallic second frames. Under this yield mechanism, the seismic strength is dissipated ordinarily with the aid of using the plastic hinges with inside the beams and on the column bases. The relative plastic flexural capacities …
Published in Journal of Structural Engineering and Management · Vol. 8, Issue 2, 2021 · pp. 45–53 Read article
-
Simulation of Electrostatic Microactuator with Two-Sided Electrodes
Abstract: Microcantilevers are the basic MEMS structures, which can be used as both sensors and actuators. The objective of this work is to study the concept of two-way deflection of the cantilever due to applied voltage and the ground. The proposed work is carried out by using Comsol/Multiphysics software which is based on the finite element method (FEM). The proposed work is modeled and simulated by selecting electromechanics as the physics …
Published in Journal of Mechatronics and Automation · Vol. 2, Issue 1, 2015 · pp. 10–15 Read article
-
Analytical Study on Optimum Placement and Sizing of X-Plate Metallic Dampers for Seismic Response Control of Multistoried RC Building Frame
Abstract: X-plate metallic damper (XPD) is one device that is capable of sustaining many cycles of stable yielding deformation resulting in a high level of energy dissipation or damping. For quantification of effectiveness of XPD, optimum placement and sizing of XPD are one of the practical interest. This paper investigates effect of placement and sizing of X-Plate damper on a G+3 square shaped building. The most optimal damper placement location pattern …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 2, 2017 · pp. 6–12 Read article
-
Soil Stabilized Road
Abstract: This research examines the suitability of soil-stabilized roadways for light vehicular movement, offering an economical and practical alternative for areas with limited infrastructure development. Stabilizing soil involves improving its engineering properties by incorporating additives such as cement, lime, or other binding materials. Through stabilization, the treated soil can achieve a compressive strength of approximately 5 N/mm², or 500 tonnes per square meter (t/m²), which is sufficient to support loads imposed …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 2, 2025 · pp. 38–42 Read article
-
The Role of Polymer Chemistry in Developing a Novel Polymer-Based Retromolar Endotracheal Tube
Abstract: This study presents the development and characterization of a novel polymer-based modified endotracheal tube designed for retromolar intubation. The tube is manufactured using medical-grade polyvinyl chloride (PVC) with reinforced polymeric structures to enhance flexibility while maintaining lumen integrity. The incorporation of a preformed lateral curvature mitigates airway resistance and airflow reduction caused by manual bending, ensuring an optimal balance between rigidity and adaptability. Additionally, the integration of polymer-based ligature wires …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 14–20 Read article
-
Study of Free Vibration Analysis of Circular Laminated Plate Based on FSDT
Abstract: Fiber and matrix make up a composite substance. As a result, a composite material is a product that has two or more distinct constituent materials or phases. Layers of composite material fibres are assembled to have ideal engineering properties in a composite laminate. The aim is to create a material that outperforms its constituent parts in terms of efficiency. Mechanical strength, corrosion resistance, high-temperature resistivity, heat conductivity, stiffness, resilience, lightness, …
Published in Journal of Experimental & Applied Mechanics · Vol. 12, Issue 1, 2021 · pp. 1–5 Read article
-
Intelligent Biocomposites for Real-Time Health Monitoring Applications
Abstract: Intelligible biocomposites are emerging as an enhanced material in the sense that they provide the capability to monitor health in real time because they have the inbuilt sensing and adjusting features. In this paper, the concepts of the intelligent biocomposites that have the ability to capture both mechanical and biochemical cues are to be presented as an informatics of designing, fabricating, and modeling. Multiphysics is used to couple mechanical deformation …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Numerical Investigation on Medium Velocity Impact Response of Hybrid Metal Matrix Composite Laminate
Abstract: The current investigation centers on examining the numerical analysis of a hybrid metal matrix composite laminate resulting from impacts inflicted by diverse projectiles on the composite structure. Composite materials are chosen based on their inherent properties and compatibility in terms of bonding with other materials, forming the layers for the hybrid metal matrix composite. The fiber taken for the research paper was Kevlar and Sisal because they both bear good …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 346–358 Read article
-
Basalt Fiber, Palm Fiber, and Seashell Powder Reinforced Hybrid Epoxy Composites: A Mechanical Characterization
Abstract: This study investigates epoxy-based composites reinforced with basalt fiber, palm fiber, and seashell powder fabricated via hand lay-up. Mechanical characterization included tensile, flexural, hardness, and impact testing, supported by ANOVA and TOPSIS analyses. The Basalt-Epoxy composite has the highest mechanical strength among the systems under investigation, with a tensile strength of 275 N/mm² and a yield stress of around 215 N/mm². Compared to Palm-Epoxy composite, which has the lowest mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1565–1575 Read article
-
Impact of Fracture in Geometrical, Material, and Load Rate Characteristics on J-Integral
Abstract: The present study investigates the influence of load rate, geometrical parameters, and material properties on the J-integral behavior of AA2050-T84 aluminum-lithium alloy using three-dimensional elastic–plastic fracture mechanics (EPFM) analysis. Finite element simulations were carried out using the ABAQUS software to evaluate crack driving forces in compact tension (C(T)) specimens under various mechanical and thermal conditions. The study focuses on the combined effects of strain rate, temperature-dependent strain hardening, specimen thickness …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 38–45 Read article
-
Performance of GFRP Bars in Flexural Members: A Comparative Study with Metal Bars Using FEA and Experimental Study
Abstract: In recent years, GFRP bars have been introduced as a replacement for metal bars as reinforcement in flexural members. This study evaluates the use of GFRP bars as the main reinforcement in flexural members such as beams through computer simulations and experimental work. A 4-meter beam from a sample structure, analyzed as per IS 875 (1987) Part 2, was considered for the study. This beam was designed considering both metal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 262–267 Read article
-
Dielectric Elastomers in Actuation and Energy Applications: Material Behavior and Design Strategies
Abstract: Dielectric elastomers (DEs), a class of electroactive polymers, have attracted significant attention for their ability to undergo large, reversible deformations under electric stimulation. This unique capability makes them highly suitable for a range of actuation and energy harvesting applications, especially in the emerging fields of soft robotics, flexible electronics, artificial muscles, and sustainable power generation systems. DEs offer compelling advantages such as low weight, mechanical flexibility, high energy density, and …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 3, Issue 1, 2025 · pp. 13–18 Read article
-
Investigation on Thermal and Modal Analysis of Brake Disc Made of SS410 And SS304 Using ANSYS
Abstract: The Primary purpose of the investigation is to investigate the vibration and noise that are present in the braking system. As a result of the application of braking force, the kinetic energy of the vehicle was transformed into heat, sound, and vibrational energy. The dynamic structural characteristics of the components that make up the braking system are closely linked to the modal behaviour, which refers to the vibration modes that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 346–358 Read article
-
Study of Diagonal Ties and Metal Plate as a Confining Reinforcement for RCC Short Columns
Abstract: Column is a most important structural member in the structural system. Even after the strong column weak beam theory used in the design of the structural member it has been observed that the many times structure collapsed due to the failure of the column. There are many reasons of the column failure but out of that major reason of the failure is ineffective confinement of the column specimen and uneven …
Published in Journal of Structural Engineering and Management · Vol. 8, Issue 3, 2021 · pp. 39–46 Read article
-
Creep Analysis Characterization and Study of Biodegradation Effect on Compression Molded LDPE/Cellulose Composites
Abstract: AbstractSynthetic polymers are important industrial materials, but their everyday use is hazardous to the environment. The solution to this seems to lie in modification of their structure through blending with biopolymers. Low density polyethylene (LDPE) and Cellulose were used in sample preparation for research in this work. LDPE/starch composites have undesirable properties and so there was need to explore LDPE/cellulose composites and evaluate their susceptibility to primary biodegradation. Compression molded …
Published in Journal of Polymer & Composites · Vol. 2, Issue 1, 2023 · pp. 37–45 Read article
-
Phase – Field Modeling of Brittle and Ductile Fracture Under Complex Loading Conditions
Abstract: Phase-field modeling has emerged as a powerful computational framework for predicting fracture behavior in engineering materials, offering a unified description of crack initiation, propagation, branching, and coalescence without the need for explicit crack tracking. This study presents an in-depth examination of phase-field modeling applied to both brittle and ductile fracture under complex loading conditions, including multiaxial stress states, cyclic loading, thermal gradients, and dynamic impact. The phase-field approach regularizes the …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 13–18 Read article
-
Utilization of Recron Fibers for Improving Subgrade Stability of Expansive Soils
Abstract: The major interest in the utilization of synthetic fibers is used as reinforcing material for developing reinforcing effect into the entire soil composition laid bellow the structures whare as construction works are going on. Various articles are published on soil reinforcement, yet some of them fibers used are prepared by using with synthetic materials, one type of synthetic fibers were Recron fiber it is used as a reinforcing element to …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 170–178 Read article
-
Experimental Study on Load Transfer Mechanism in Columns Retrofitted by Bonding Precast Segments and FRP Wrapping
Abstract: An experimental study was conducted to investigate the load transfer mechanism in columns retrofitted with precast segments and Fiber-Reinforced Polymer (FRP) wrapping. As the demand for structural retrofitting grows, it becomes crucial to comprehend the behavior and effectiveness of retrofit techniques to ensure the safety and integrity of existing infrastructure. The study involved subjecting a series of column specimens to axial compression loads in order to evaluate the load transfer …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 153–165 Read article