Search
734 articles for “SURF”
-
Finite Element Modelling of Contact Stresses in Helical Gear Systems
Abstract: Helical gears are widely used in modern power‐transmission systems because of their high load‐carrying capacity, smooth meshing action, and increased overlapping of gear teeth. However, the design of helical gear pairs is constrained by contact stresses generated at the mating tooth surfaces, which can lead to surface fatigue (pitting), micro-cracking, and ultimately gear failure. Traditional analytical methods, such as those of the American Gear Manufacturers Association (AGMA) or International Organization …
Published in Trends in Machine design · Vol. 12, Issue 3, 2025 · pp. 35–39 Read article
-
Interfacial and Tribo-Mechanical Performance of a TiO₂–Castor Oil Polymeric Nanofluid During Sustainable Machining of AISI 316L Stainless Steel Under MQL Conditions
Abstract: This research examines the tribo-mechanical performance and interfacial film characteristics of a TiO₂-reinforced castor-oil polymeric nanofluid during the turning of AISI 316L stainless steel under minimum-quantity lubrication (MQL). A Taguchi L9 orthogonal array was utilized to assess the synergistic effects of cutting speed, depth of cut, and coolant composition on surface integrity, while machining experiments were performed under dry, conventional, and TiO₂-nanofluid lubrication techniques. ANOVA and multiple-regression modeling were used …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 901–914 Read article
-
Development of a Novel Analytical Framework for Investigating Non-Symmetric Deformation Behavior in Strip Rolling
Abstract: In recent years, the asymmetrical rolling process has attracted considerable research attention due to its ability to induce non-uniform deformation characteristics within metallic workpieces. In this context, the present study introduces a novel analytical framework for asymmetrical cold rolling based on an enhanced slab method, specifically designed to overcome the inherent limitations of existing analytical models when applied to a wide range of asymmetric rolling conditions. A newly developed mathematical …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 1, 2026 · pp. 1–21 Read article
-
Multi-Sensor System for Underwater Pothole Detection to Enhance Road Safety During Monsoon Seasons
Abstract: Monsoon seasons across India and similar tropical regions severely compromise road safety by causing water accumulation that conceals dangerous potholes beneath stagnant pools, leading to frequent vehicle damage, tire punctures, and fatal accidents. Traditional detection methods relying on smartphone accelerometers, ultrasonic sensors, or machine vision fail under flooded conditions due to acoustic signal reflection at water surfaces and optical distortions from glare and turbidity. This research proposes an innovative multi-sensor …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 4, Issue 1, 2026 · pp. 25–32 Read article
-
Role of Polymer and Composite Materials in Enhancing Durability and Comfort of Urban Park Furniture for Senior Citizens
Abstract: Parks in urban areas are crucial in facilitating physical activities, socialization, and or mental health to the elderly citizens. Nonetheless, the traditional materials in outdoor park furniture may suffer in the form of low durability, weathering, ergonomics and maintenance, among other aspects and restrict long term applications of such furniture by the elderly population. The research question examined in the proposed study is: How can polymer-based and composite materials improve …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 297–311 Read article
-
AI-Driven Prediction of Square-Hole Laser Trepanning Performance in AA7075/15%SiC/15% Glass Fiber Hybrid Composites Using Taguchi–ANOVA and Deep Neural Networks
Abstract: Hybrid AA7075 composites reinforced with 15% silicon carbide (SiC) and 15% glass fiber were fabricated via the stir casting technique to improve machining and structural performance. The addition of dual reinforcements into the aluminum matrix was aimed at enhancing hardness, thermal stability, and surface quality during non-traditional drilling operations. Square-hole drilling was performed using a laser trepanning process, and the key responses—hole size accuracy, surface roughness, and taper angle—were systematically …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1932–1943 Read article
-
Monitoring the Effectiveness of Water-Based Plants for the Inhibition of Metal
Abstract: The temperature performance profile of the plant extracts shows that inhibition efficiency increased with increasing temperature of the system until at about 323K at 9.00hrs immersion time where a decline in inhibition efficiency occurred implying the opposite at higher temperatures and longer immersion time. Corrosion rate parameters changed with rise in temperature and exposure – immersion time. Plots of rates of corrosion against the volume(s) of the test inhibitor(s) in …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 37–47 Read article
-
Hybrid Numerical–Artificial Neural Network Study of Chemically Reactive MHD Nanofluid Flow Incorporating Thompson–Troian Slip and Stefan Blowing
Abstract: Boundary layer behaviour in chemically reactive nanoliquid is significantly affected by surface conditions, magnetic fields, heat and mas transfer mechanisms. However, the combined impact of Stefan blowing and nonlinear Thompson–Troian slip under inclined magnetic fields remains mostly unexplored, particularly in mixed convection flows. In this research work, the flow of a chemically reactive nanoliquid over a permeable surface is investigated by considering the Troian slip, inclined magnetic fields, Stefan blowing, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 409–425 Read article
-
Gold Nanoparticle Size, Biodistribution, and Toxicity: Insights from DualEnergy CT
Abstract: Dual-energy and spectral computed tomography (CT) have emerged as powerful platforms for noninvasive, quantitative mapping of nanoparticle biodistribution in vivo. By exploiting the energy-dependent attenuation profiles of high-atomic-number (high-Z) materials, these systems enable material decomposition and element-specific imaging, thereby distinguishing nanoparticle signals from those of soft tissues and conventional iodinated contrast agents. Photon-counting spectral CT further enhances this capability by binning individual photons into multiple energy channels, improving spatial resolution, …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 28, Issue 2, 2025 Read article
-
Growth of Cu2O on TCO by SILAR method acts as an alternative buffer electrode layer towards the development of organic solar cell
Abstract: In many types of optoelectronic devices, layer of PEDOT: PSS is sandwiched between the indium-tin oxide (ITO) electrode and the active layer. Buffer PEDOT: PSS provides a well- defined work function which is higher than that of ITO (4.2eV), it smooths the ITO surface and so avoids shorts, and it also protects the active layer from ingress of indium or oxygen, leading to longer device lifetimes. The role of PEDOT: …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 18–25 Read article
-
Sustainable Carbon Materials for Catalysis, Energy Conversion, and Environmental Remediation
Abstract: Among the most ancient and adaptable materials used by humans, carbon finds use in a wide range of industries, including electronics, energy production, medicine, water purification, air filtration, and catalysis. Among them, activated carbon's highly developed microporous structure, remarkably large specific surface area, and adjustable surface functions have drawn a great deal of attention from both science and industry. Activated carbon materials have been widely used as molecular sieves, adsorbents …
Published in Emerging Trends in Chemical Engineering · Vol. 13, Issue 2, 2026 · pp. 47–52 Read article
-
Anti-Soiling Coating Technologies for PV Panels Under Dust Storm Conditions
Abstract: Background Deployment of photovoltaics (PV) in arid and semi-arid areas where there is ample sunlight has been increasing quickly because of their great solar irradiation. The rising number of dust storms, as well as depositing particulate matter to the air, have caused a significant decrease in energy production due to reduced transmittance of light through the surface of the PV panel from the dust on the panel’s surface. This has …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 26–36 Read article
-
A Comparative Study of the Structure-Property Relationships in CAD/CAM Milled vs. 3D-Printed High-Performance Polymers: Impact of Molecular Orientation on Abrasive Wear
Abstract: Background: The transition from subtractive to additive manufacturing in prosthetic dentistry has introduced significant variations in the macromolecular architecture of high-performance polymers. While CAD/CAM milling utilizes high-density, industrially polymerized blocks, 3D printing (Additive Manufacturing) relies on layer-by-layer deposition, which may induce anisotropic molecular orientation. This retrospective study investigates how these distinct manufacturing "thermal histories" influence the long-term abrasive wear resistance of PEEK and PEKK restorations.Materials and Methods: Data were retrospectively …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Crosslinked Starch Polymer for Coating on Fruit/Vegetable for Preservation Derived from Waste De-Oiled Soybean Cake
Abstract: Cross-linked starch films have been prepared by reacting starch extracted from de-oiled soybean cake (waste material from oil industry) with bio-based acids citric acid and tartaric acid. The obtained films were characterized by spectroscopic, thermal and surface morphological techniques. Thermal analysis showed that thin film has good thermal stability. The micrographs obtained from scanning electron microscopy showed the film surface has smooth and uniform morphology. Biological properties like cytocompatibility, antimicrobial …
Published in Journal of Catalyst & Catalysis Read article
-
An Optimize Formulation to Synthesis of size Controlled Hydrophobic Starch Acetate Nanoparticles using Box- Behnken Design
Abstract: The best way to improve the overall performance of native starch is by chemical modification. In recent years, hydrophobically modified starch has attracted considerable attention for the design and manufacture of novel nanoparticulate drug delivery carriers. The purpose of this research was to synthesize hydrophobic starch nanoparticles (NPs) and to optimize process factors through the use of response surface methodology (RSM). The corn starch acetate (CSA) NPs was synthesized using …
Published in Journal of Polymer & Composites Read article
-
Inhibitory Potentials of Datura Metel to Prevent Mild Corrosion
Abstract: The resistance of mild steel to corrosion was evaluated by immersing it in well water and determining the weight it lost after being allowed to return to room temperature after the submersion. The effectiveness of mild steel's ability to withstand corrosion was evaluated using this approach. A reduction in total body mass has an influence that is connected to and helps play a role in the prevention of rusting from …
Published in Journal of Polymer & Composites Read article
-
Suitability of Additive Manufacturing Process in Optical Lens Production
Abstract: Additive Manufacturing is one of the non-conventional methods of manufacturing that is gaining immense popularity for its ease to manufacture customized parts. The lenses have always been manufactured using a continuous process of Blanking, Surface generation, Edging and Centering, Grinding, Polishing, and Coating. But the conventional processes demand large inventories and more time. Customization of lenses may also be possible if a process like Additive Manufacturing is implemented. Also, the …
Published in Trends in Mechanical Engineering & Technology Read article
-
Increasing Total Solar Irradiance on Far Future Climate: General Atmospheric Circulation
Abstract: The total solar irradiation at the top of the atmosphere is the primary forcing mechanism for the Earth's Climate System. In this work, we used the addition of 10% in the radiation value (from 1360 Wm−2 to 1496 Wm−2) to simulate the Earth's climate system in the habitable zone inner orbit. Two tenyear- long fully coupled simulations using the Community Earth System Model were performed; the CONTROL experiment was configured …
Published in Research & Reviews : Journal of Space Science & Technology Read article
-
Semiconductor Physics and Micron Scale Fluid Mechanics towards the Microelectromechanical Systems Associated with Nanotechnology
Abstract: Interrelations among semiconductor physics, microfluidics, nanofluidics and nanotechnology are briefly described. A single microchannel bend is designed and fabricated by author using the maskless lithography, hot embossing lithography and direct bonding. Dyed water is the selected and prepared working liquid in this work. Surface-driven (passive) capillary flow of working liquid is recorded in the fabricated microchannel bend using a CMOS camera. This work may be useful in applied chemistry.
Published in Research & Reviews : Journal of Physics Read article
-
Artificial Neural Network Modelling to Optimize Micro-Drilling Parameters of ECDM of Developed Novel Zn/(Ag+Fe)-MMC
Abstract: Several engineering fields have increased their use of metal matrix composites (MMCs) in the past few years. Due to the increase in composites, the demand for accurate machining has also become important. Specifically, pertaining to biomaterial applications, accuracy factor with desired surface finish is critical. While the near-net shape manufacturing process has advanced, MMCs frequently require post-mould machining to achieve surface quality, and dimensional tolerances. In the present study, a …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 01–13 Read article