Search
1929 articles for “8-10nm size” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Investigating the Effect of Annealing Temperatures on SnO2 Nano Structural Thin Films and their Properties
Abstract: As deposited and two different annealing temperatures (500°C and 600°C) of Tin dioxide (SnO2) thin films are prepared on glass substrates by Chemical Bath Deposition (CBD) technique and subsequently their structural, morphological, optical and electrical properties are investigated and analyzed as a function of annealing temperature. It’s found that SnO2 films exhibit different nanostructures at different annealing temperatures. XRD analysis confirms that both deposited and annealed films are cubic structure …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 12, Issue 1, 2022 · pp. 28–39 Read article
-
Plant Seeds as Biosorbents for the Purification of Water
Abstract: Water purification is essential to overcome drinking water problem. This study was carried out to find out suitable low cost biosorbents for the purification of physiochemical parameters of water. Moringa (Moringa oleifera), Nelli (Phyllanthus acidus), jackfruit (Artocarpus heterophyllus), java plum (Syzygium cumini) and mangrove apple (Sonneratia caseolaris) seeds were used and their efficiency was compared with activated charcoal as a reference. Water samples were collected from a selected drinking well …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 9, Issue 2, 2018 · pp. 30–39 Read article
-
Alcohol Production from Pre-treated Maize and Paddy Lignocellulose Biomass in a Fabricated Unit
Abstract: An alcohol production unit was fabricated to handle 5 kg biomass per batch of paddy straw or maize stalk hydrolysis and fermentation. Various lignocellulose treatments were repeated from a previously reported study on paddy straw to compare it to that of maize stalk as a substrate biomass in a fabricated unit [1]. The pre-treatments to these lignocellulosic biomasses from maize stalk (MS) and paddy straw (MS) were compared after their …
Published in Research & Reviews : Journal of Agricultural Science and Technology · Vol. 6, Issue 2, 2017 · pp. 1–10 Read article
-
Detection and Killing of Food Poisoning Salmonella Typhimurium in Cheese by Using Monoclonal Antibody and Nanoparticles Complex
Abstract: Present studies were conducted to test the ability of gold nanoparticles (GNPs) to detect and kill the bacterial contaminated food samples like cheese. The GNPs were prepared in two methods, sample A was purple 72 to 78.3 nm, while sample B was wine-red and the size was 51.5 to 58 nm. The results obtained suggest that the GNPs were synthesized with different particle size. UV-VIS spectroscopy and zeta potential tests …
Published in Research & Reviews : Journal of Food Science & Technology · Vol. 5, Issue 1, 2016 · pp. 1–10 Read article
-
Safety evaluation of Maghz-e-Jamun (Eugenia jambolana) in Prediabetes - A Randomized Placebo Controlled Study
Abstract: Objective: to evaluate the safety of Unani drug Maghz-e-Jamun(Eugenia jambolana) in Prediabetes. Research design and methods: It was randomized, single blind, placebo-controlled study randomly assigned to 52 prediabetic patients (diagnosed according to ADA classification) in the test and control group. Maghz-e-Jamun (Eugenia jambulana) powder 4.5 g was filled in 6 capsules, 3 capsules were administered orally twice a day in the test group for 12 weeks. While placebo prepared with …
Published in Research & Reviews : Journal of Herbal Science · Vol. 8, Issue 2, 2019 · pp. 19–27 Read article
-
Documentation of Leaf Curl Virus Resistance Sources in BARI Released Tomato Varieties and Lines
Abstract: An experiment was conducted at the Regional Agricultural Research Station, Jamalpur, Bangladesh during rabi season of 2022-23 to identify noble sources of resistance in BARI released Tomato varieties/lines against leaf curl viruses. The evaluation of forty-six Tomato genotypes was performed against Tomato Leaf Curl Viruses (ToLCV) under natural conditions where the viruses were transmitted by white fly. However, ToLCV-infected plants ranged from 6.25 to 39.58% in the study. Thirty-four varieties/lines …
Published in Research and Reviews : A Journal of Life Sciences · Vol. 13, Issue 3, 2023 · pp. 64–79 Read article
-
Characterization of Al6082 and Magnesium AZ3lB Composite Produced by The Friction Stir Additive Manufacturing
Abstract: In this modern era, lighter and stronger materials are needed. This is especially true for materials needed in aerospace, robotics, light aircraft, defence, and transportation. When comparison to backbone products in order composite goods have a higher durability & stiffness-to-weight proportion .Most of the newer fabricating methods, called friction stir additive manufacturing (FSAM), uses solid-state drives friction stirring technology to produce bilayer structures by sequentially fusing discrete strata. In this …
Published in International Journal of Manufacturing and Production Engineering · Vol. 1, Issue 1, 2023 · pp. 1–14 Read article
-
Efficient Gabor Filter Design Using Verilog HDL with Multiplier-accumulator (MAC) Implementation
Abstract: This paper introduces a novel and enhanced Gabor filter design aimed at addressing the demands of image processing applications using the Verilog Hardware Description Language (HDL). Specifically, it leverages the Reconstruct Gabor filter technique to elevate the performance and quality of standard image outputs. The primary objective of this research endeavor is to simplify the study, conduct an in-depth analysis, and substantially enhance the design's efficiency, all while ensuring the …
Published in International Journal of VLSI Circuit Design & Technology · Vol. 1, Issue 2, 2023 · pp. 40–46 Read article
-
Exploring the Impact of Lattice Strain on the Debye-Waller Factor in Iron Nanoparticles: A Comprehensive Analysis
Abstract: This study systematically investigates the influence of lattice strain and particle size in iron powder produced through milling, employing X-ray powder diffraction. The determination of lattice strain (ε) and the Debye-Waller factor (B) is accomplished by analyzing Bragg reflection half-widths and integrated intensities. Significantly, the Debye-Waller factor exhibited a notable increase with lattice strain. By establishing a correlation between stress and the influential Debye-Waller factor, we derived a precise relationship …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 215–224 Read article
-
Deformation Behaviour of the Billet and Tooling Design on AA5083 through Equal Channel Angular Pressing With Effect of Back Pressure
Abstract: Equal channel angular pressing is an emerging method applied to subject materials to significant plastic strains while maintaining the original shape of the billet. Researchers have discovered that the level of strain attained through equal channel angular pressing is influenced by factors such as the angle of die, friction conditions, and the implementation of back pressure. These variables significantly impact the microstructure and the irregularity of strain within the billet …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 287–303 Read article
-
Effect of Vermicompost, Compost and Inorganic Fertilizer on Production of Onion at Southern Ethiopia, Wolaita Zone Humbo District
Abstract: Combined application of fertilizers (organic and inorganic) could able to optimize production and productivity of onion. This experiment was conducted in Humbo district southern Ethiopia during 2019- 2021 under irrigation to evaluate the effect of organic and inorganic fertilizer on bulb yield and general production of onion. Experiment was laid out in randomized complete block design with three replication and consisted of seven treatments: T1: control, T2: NPSB(82.2N, 31.4P, 13.4S, …
Published in Research & Reviews : Journal of Botany · Vol. 13, Issue 1, 2024 · pp. 31–39 Read article
-
A Study to Assess the Knowledge and Attitude Regarding Post Dialysis Dietary Regulations Among Care Givers of Chronic Kidney Disease Patient Undergoing Hemodialysis in Selected Hemodialysis Unit at Agartala, West Tripura
Abstract: Introduction and objectives of the study: - Chronic renal failure is a gradual, irreversible decline in kidney function, leading to uremia. This condition necessitates hemodialysis to manage the body's internal environment. Dialysis becomes essential at the final stage of chronic kidney disease, known as end-stage renal disease. Objectives of the study are as: i) The objectives of this study are: i) To evaluate caregivers' understanding of dietary regulations following dialysis …
Published in Research and Reviews: A Journal of Health Professions · Vol. 14, Issue 2, 2024 · pp. 89–103 Read article
-
Unravelling the Influence of Dimensions on the Thermoelectric Properties of AHEGNR
Abstract: The thermoelectric properties of hydrogenated edge semiconductor graphene nanoribbons (GNRs) have thus far been explored in detail. The effects of varying the sizes of zigzag hydrogenated edge graphene nanoribbons (ZHEGNRs) and armchair hydrogenated edge graphene nanoribbons (AHEGNRs) in terms of their properties were investigated in this study. This was achieved via the control of the graphene nanoribbon dimensions i.e., width and length by utilizing density functional theory in Quantum Espresso, …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 3, 2024 · pp. 45–51 Read article
-
Geotechnical Analysis and Performance Evaluation of Subgrade Materials in Road Construction
Abstract: Geotechnical engineering plays a pivotal role in the design, construction, and long-term maintenance of infrastructure, particularly in road construction, where subgrade conditions are directly linked to pavement performance, durability, and overall structural integrity. The performance of a road is heavily influenced by the geotechnical properties of the subgrade, making it essential to thoroughly assess these properties in the planning and construction phases. This study comprehensively investigates the geotechnical characteristics and …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 3, 2024 · pp. 24–29 Read article
-
Millets as a Sustainable Crop for Nutritional Security: Addressing Malnutrition Challenges
Abstract: Millets are cereal crops belonging to the Poaceae family, which is the scientific name for the grass family. They are classified into two main groups: major millets which include Sorghum, Pearl, Finger millet, and minor millets, such as Little, Foxtail, Proso, Barnyard, and Kodo millet. India is the chief producer of millets, with an annual production of more than 17 million tonnes. This accounts for 80% of Asia’s millet production …
Published in International Journal of Nutritions · Vol. 2, Issue 1, 2025 · pp. 33–46 Read article
-
Evaluation of AGO Adsorption Rate Isotherms Using Adsorbent Formulation of Plantain Agbagba1 and Clay of Different Mix Ratio in Pollutant Remediation in Salt Water
Abstract: The application of some agro-based materials in combination with day soil, for the production of adsorbents were investigated in relationship to their performance in AGO (Diesel) treatment in a batch process unit. The research allows the model concept of Langmuir isotherm, Frundlich isotherm and Temkin Isotherm for the determination of the adsorption rate of the various isotherms with respect to the effect of the particle size and the mixed ratios …
Published in International Journal of Pollution: Prevention & Control · Vol. 2, Issue 2, 2024 · pp. 31–42 Read article
-
Effect of Thermal Conditioning - Mechanical Performance of Natural-Synthetic Fiber Hybrid Composites
Abstract: This study investigates the effects of thermal conditioning on the mechanical and thermal properties of banana-glass fibre hybrid composites, focusing on their tensile, flexural, impact strength, and thermal conductivity. Hybrid composites were fabricated with varying banana-to-glass fibre ratios of 70:30, 50:50, and 30:70 using a hand layup technique, followed by thermal conditioning at 60°C, 80°C, and 100°C for a specified duration. Results highlight that the 50:50 composite treated at 80°C …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 1–11 Read article
-
Substitution of La3+ in Cu0.5Co0.5 LaxFe2-x O4 (x=0.02, 0.06) spinel ferrites improves the structural and dielectric Properties
Abstract: Nanosized Spinel ferrites with composition Cu0.5Co0.5 LaxFe2-x O4 (x=0.2, 0.6) synthesized by Sol-Gel auto Combustion method. The prepared sample was calcinated at 8000c for 4 hours. The substitution of La3+ effects the structural parameters, which is characterized by X-ray diffraction (XRD). The X-rd analysis shows that the crystallite size is 34.609 nm for 0.02 and 38.994 nm for 0.06 was calculated by using Debye-Scherrer’s formula. dislocation density shows at value …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 45–48 Read article
-
A Comprehensive Review of AI-Driven Strategies for Tailored Wellness and Dietary Recommendations
Abstract: In today’s fast-paced world, health and fitness have become top priorities for many individuals. As a result, people increasingly turn to mobile apps and digital tools to track their wellness goals, follow diet plans, and stay fit. However, most of these apps provide the same set of recommendations for all users, ignoring the fact that everyone has different needs. This one-size-fits-all approach often fails to keep users engaged and motivated, …
Published in International Journal of Algorithms Design and Analysis Review · Vol. 3, Issue 2, 2025 · pp. 16–20 Read article
-
Polymer-Nanowire Hybrid Composites Based on PEDOT: PSS and AgNWs for High-Performance Conductive Films in Flexible Devices
Abstract: The growing demand for flexible photovoltaic and wearable optoelectronic devices has intensified research into polymer-based conductive composites that provide transparency, flexibility, and electrical efficiency. In this work, we report the fabrication and characterization of a hybrid polymer nanocomposite electrode comprising silver nanowires (AgNWs) embedded within a PEDOT:PSS matrix, deposited on flexible polyethylene terephthalate (PET) substrates. The PEDOT:PSS polymer phase, modified with 5 vol% dimethyl sulfoxide (DMSO) and 0.1 vol% Zonyl …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 236–250 Read article