Search
48 articles for “melting temperature”
-
Hybridization Method for Injection Moulding Process, Optimization with Melting Temperature Parameters
Abstract: Due to the production of plastic products with complex shapes, the plastic injection moulding manufacturing method has recently received a lot of attention. In order to improve manufacturing performance, the cycle time for the injection moulding process has been reduced, the defect known as dimensional warpage that results from temperature differences inside the mould has been reduced, and the mechanical tensile strength of the material has been increased so that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 337–345 Read article
-
Studies on the Influence of Squeezed Stir Casting Parameters on the Strengthening Properties of AZ91Mg Alloy
Abstract: In this research, optimum squeeze stir casting parameters of AZ91 Mg alloy has been investigated by considering its strengthening properties. Melting temperature, squeezed pressure, and molding temperature is the key parameters that are considered for this investigation. The result of this research reveals that 750°C melting temperature, 250 MPa squeezed pressure and 250°C molding temperature represent a significant combination with its strengthening properties in AZ91Mg alloy. This combination is confirmed …
Published in Journal of Polymer & Composites Read article
-
Experimental Analysis Of Thermal Behaviour Of Phase Change Materials In Cooling Applications Of Roof Top Building Slabs
Abstract: In this research article, different phase change materials are incorporated inside the slabs to reduce the heat transfer from the roof. Experiments are conducted during summer season March 2021 to the time lag decrement factor and heat flux to that of results are compared with RCC slab to that of Green material I (CaCl26H2O) and Green Roof with Green material II (48%CaCl2+4.3%NaCl+0.4%KCl+47.3%H2O). On comparison Green Slab II is having better …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 102–114 Read article
-
Impact of Shape, Size and Crystal Structure on Vacancy Related Properties of Gold Nanoparticles
Abstract: It is necessary to consider defects to explain the electron movement, thermal transport and mechanical properties of materials. In the present study, a simple quantitative model for cohesive energy of nanoparticles is extended to determine the size, shape and crystal structure effect on vacancy formation energy, vacancy entropy, and vibrational frequency in free surface Au nanoparticles. Vacancy entropy variation with size has been studied for spherical, regular octahedral, regular hexahedral …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 223–229 Read article
-
Numerical Analysis of Battery Thermal Management Using Phase Change Material Concerning Melting Fraction and Temperature
Abstract: This work, analysis and simulates a phase change material melting for battery thermal management (BTM). Phase change materials (PCM) are the substances that, undergo through a phase transition, such as melting from solid to liquid by absorbing or releasing a significant amount of energy as heat. PCM is advantageous for the thermal control of batteries because of this characteristic. As the battery produces heat, the PCM surrounding it absorbs the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 19–31 Read article
-
Effect of Red Mud Loading on the Thermal and Mechanical Performance of Polypropylene Composites
Abstract: Waste red mud (RM) serves as a low-cost and sustainable filler material in a polypropylene (PP) matrix. This study investigate the effects of different red mud contents on the dynamic mechanical and thermal properties of polypropylene-red mud (RM-PP) composites where red mud levels range from 0% to 40% (based on weight percentage). Fourier Transform Infrared Spectroscopy (FTIR) was conducted for verifying the presence of both polypropylene and red mud in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 161–169 Read article
-
Substantial Enrichment of Mechanical, Thermal and Electrical Properties of Thermoplastic Polyester Elastomer by Melt Blending with Nano-ZnO
Abstract: Polymers are more reinforced with nano metal oxides, a completely flexible composite of engineering that simplifies the way of exhibiting good mechanical and chemical features. Polymer mixtures represent a very vital field in the handling of innovative ingredients, which have better features than net polymers. Polymer mixtures are able to deliver ingredients with prolonged useful features beyond the range that can be achieved from a single polymer equivalent. A methodical …
Published in Emerging Trends in Chemical Engineering Read article
-
Evaluation of Modified Nanoparticles' Effects on Polypropylene Composites
Abstract: Numerous sectors use nanoparticles and nanocomposites in a range of applications, including medicine, textiles, cosmetics, agriculture, optics, food packaging, optoelectronics, semiconductors, aerospace, building materials, and catalysis. Polymeric nanocomposites, which combine organic polymers with inorganic nanoparticles, are a novel family of materials that perform better than their microparticle counterparts. They should therefore enhance the field of engineering applications. A polymer matrix's characteristics can be drastically changed by the addition of inorganic …
Published in International Journal of Pollution: Prevention & Control · Vol. 1, Issue 2, 2023 · pp. 23–34 Read article
-
Effect of Nano Metal Oxide Loading Rates on Polymer-Nano Metal Oxide Nanocomposites
Abstract: Many industries, such as those in the fields of medicine, textiles, cosmetics, agriculture, optics, food packaging, optoelectronics, semiconductors, aerospace, building materials, and catalysis, utilise nanoparticles and nanocomposites in a variety of applications. A unique class of materials, polymeric nanocomposites outperform their microparticle counterparts by fusing organic polymers with inorganic nanoparticles. Consequently, they ought to advance the field of engineering applications. The presence of inorganic nanoparticles can significantly alter the properties …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 1, 2024 · pp. 1–12 Read article
-
Analysis of Size and Shape Dependence of Thermophysical Properties of Nanomaterials
Abstract: A simple qualitative model, named Qi model which is further extended to Bond energy model has been expressed in terms of melting temperature to explain the shape and size effect on Debye temperature ( ) and Einstein temperature ( ) of nanomaterials. It is known that properties of materials drastically change with size reduction to nanorange and increase in the number of surface atoms with respect to volume of the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 258–264 Read article
-
Thermally Regulated Polymer-PCM Composites for Efficient Solar Energy Harvesting and Storage
Abstract: This study investigates the development of high-performance; shape-stabilized polymer composites infused with phase change materials (PCMs) for thermal energy storage in solar energy applications. Polyethylene glycol (PEG-6000) was employed as the core PCM due to its high latent heat and suitable melting point, while high-density polyethylene (HDPE) served as the supporting polymer matrix to provide structural stability. One of the primary limitations of PEG-based PCMs is their inherently low thermal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 153–163 Read article
-
Squeeze Casting of Hybrid Aluminum Matrix Composites: A Critical Review of Process Optimization, Reinforcement Strategies, and Performance Outcomes
Abstract: Increasing demand for lightweight, performance-oriented components in automotive, aerospace, and defense industries has driven advancements in squeeze casting, a hybrid technique merging forging and die-casting advantages to produce near-net-shape aluminum matrix composites (AMCs) with superior mechanical-tribological properties. This review critically examines the interplay of process parameters (e.g., squeeze pressure: 70–150 MPa, melt temperature: 650–800°C), reinforcement characteristics (volume fraction ≤10%, particle size: 10–71µm), and interfacial engineering strategies (flux-assisted bonding, ultrasonic dispersion) …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 2, 2025 · pp. 52–60 Read article
-
Fabrication and Characterization of Hybrid Composites Using Natural Fibers Reinforced in HDPE and Optimization of Injection Moulding Process Parameters to Minimize Shrinkage
Abstract: Materials are crucial for advancing human living standards. Over the past 20 years, composite materials have garnered significant attention owing to their unique properties and applications across various sectors. This study outlines the creation and analysis of a novel series of natural fiber-based composites, which incorporate jute, sisal, and hemp as reinforcements, with high-density polyethylene (HDPE) serving as the matrix, and produced through injection moulding. This study examines the effects …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 556–585 Read article
-
Temperature dependence of Schmidt number of composite material based liquid lithium
Abstract: This work presents a simple formalism for Schmidt number and its temperature dependence for liquid lithium. It is explained that the temperature dependence of Schmidt number (Sc = η/ ρD) can be understood through dependence of topological-short-range-order (TSRO) parameter on temperature. Expression for Schmidt number has been deduced in terms of average potential energy US of superficial core, probability of diffusional displacement (P) and the TSRO parameter (x) . Calculations …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 206–212 Read article
-
CFD Analysis: Double Pipe Heat Exchanger, Latent Heat Storage, and BIM-CFD Integration
Abstract: This is a review work covering four research papers. Heat exchangers transport thermal energy across fluids; research in SolidWorks 2014 compared flow simulation to the effectiveness-NTU approach. Slow PCM charging/discharging is a global concern in latent heat storage; research on the influence of flow rate and temperature on melting and solidification durations discovered efficiency in a triple tube heat exchanger design. Advances in computational fluid dynamics for forecasting separated flows …
Published in International Journal of Electrical Machine Analysis and Design · Vol. 2, Issue 2, 2024 · pp. 19–24 Read article
-
A Critical Analysis of Cold Spray Coatings and its Tribological Performances
Abstract: Coatings are utilized for temperature barrier, protection against corrosion and wear etc. Cold spray is a solid-state processing method that is unique among thermal deposition procedures since it deposits particles at temperatures below their melting point. This technology does not involve particle melting, hence retaining the original properties of the materials. Increased coating strength is achieved by retaining of feedstock powder microstructures and characteristics, which prevents oxide formation and other …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 220–226 Read article
-
Nano-enhanced Bio-based Phase Change Materials: A Brief Review
Abstract: The high latent temperatures and variable melting points of bio-based phase change materials make them ideal for thermal control. This covers heat regulation for medical and pharmaceutical items, building comfort, and high-end electronics and automobiles. In recent years, research and application of energy-saving materials and technologies in buildings has increased strength. Modern construction technology aims to keep old and new structures energy efficient. TES employing PCMs is an energy-efficient approach. …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 15–27 Read article
-
Rising Temperatures and Surface Mass Loss in Greenland: Implications for Regional Glacier Dynamics and Global Sea Level Rise
Abstract: In Greenland, the ice sheet serves as one of the strongest indicators of global climate change, with consistently rising temperatures driving it toward an even more negative mass balance. Over the last two decades, warmer conditions have exacerbated surface melting, darkened ice, and resulted in feedback stimulating further loss. This study assesses how those temperature trends—particularly during summer peak months—have impacted the stability of Greenland's ice, and then, more importantly, …
Published in Journal of Offshore Structure and Technology · Vol. 12, Issue 3, 2025 · pp. 15–22 Read article
-
Structure-Property-Process Relationships in BNNS-Modified PEEK Nanocomposites for High-Performance Applications
Abstract: This study reports the design and performance evaluation of boron nitride nanosheet (BNNS)-reinforced polyetheretherketone (PEEK) nanocomposites fabricated using melt compounding and high-temperature Fused Filament Fabrication (FFF). PEEK, a high-performance thermoplastic, was reinforced with BNNS at 0.5–5wt.% to enhance mechanical, thermal, and tribological functionalities for advanced engineering use. Composite filaments were extruded and printed using a modified Bambu Lab FFF printer. Mechanical testing revealed a peak tensile strength of 108 MPa …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 867–888 Read article
-
PCM with Multiple Node Injections
Abstract: Phase-Changing Materials (PCM) are currently being investigated for use as heat storage in solar energy applications. To analyze the temperature profile, morphing tree structures are used to simulate the melting algorithm of Phase Changing Material with increasing branch numbers. The melting behavior is simulated for invading lines of heat, which range from single-lined, zero branch insertions, to insertions with two branched lines. The research aims to address the growing demand …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 14, Issue 1, 2024 · pp. 2–7 Read article