Search
85 articles for “lubricant”
-
Oil lubricating tribology And additives for lubricating oil
Abstract: Numerous goods that are characterised by hundreds of basic chemicals and additions fall under the umbrella phrase "lubricating oil." Lubricating oils can either be synthetic or mineral-based. This article focuses on petroleum-based lubricating oils, which are composed of 80–90% petroleum hydrocarbon distillates and 10–20% additives and are used to lubricate a variety of internal combustion engines. Lubricating oil exposure occurs mostly through inhalation and skin contact in both occupational and …
Published in Trends in Mechanical Engineering & Technology · Vol. 12, Issue 2, 2022 · pp. 8–11 Read article
-
A Critical Review on Semi-solid and Solid Lubricants for Industrial Applications
Abstract: Friction materials are very important for the safe moving of automobiles and the safety of people. As the pad slides against its match, the moving energy is turned into heat by the friction. As the vehicle's speed is lost as heat in the pads and rotors, the friction at the contact slows it down. Lubricants are compounds that are applied to moving parts to reduce friction and wear. Used primarily …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 105–114 Read article
-
Application-Driven Rule-Based Framework for Lubrication Failure Modes in Industrial Systems
Abstract: Modern lubricants increasingly rely on polymer-based composites, integrating synthetic base oils, polymer thickeners and solid additives like MoS₂ and PTFE for high-performance applications. These formulations not only enhance thermal and mechanical stability but also enable low-friction operation across diverse industrial conditions. Lubrication-related failures represent a critical cause of unplanned downtime and reduced reliability in industrial machinery. This paper presents an application-driven, rule-based framework designed to assess and mitigate lubrication failure …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 522–531 Read article
-
Polymers with Non-polar Lubricants: Degradation and Triboelectric Performance
Abstract: Triboelectric nanogenerators (TENGs) transform electrical energy from kinetic energy with the assistance of electrostatic interactions and triboelectrification. TENGs provide countless benefits, together with cheap prices, straightforward processing, and broad enforceability. In solid interaction TENGs, wear and friction, moreover, abbreviate their life span. In this study, we assessed the tribological efficiency and power efficiency of polymeric in TENG devices with non-polar lubrication limiting friction and wear. The viscosity of the lubricant …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 3, 2022 · pp. 30–33 Read article
-
Impact of Lubricant Additives on Friction Reduction and Wear Prevention in Machinery
Abstract: Lubrication is essential for ensuring the lifespan and operating efficiency of machinery because it minimizes wear and reduces friction. Modern lubricants are made up of several chemical compounds called lubricant additives, which are essential to boost the lubricant's ability to reduce wear and friction. This study thoroughly examines how lubricant additives affect wear prevention and friction reduction in equipment. This work attempts to break down the principles behind the efficacy …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 1, Issue 2, 2023 · pp. 1–6 Read article
-
An Innovative Approach to Find the Optimum Lubricant for Diverse Applications Based on Scikit-Learn Library Using Python
Abstract: This paper presents an innovative approach for finding the optimum lubricant using the Scikit-learn library in Python. The proposed approach uses a linear regression model to analyze a dataset of lubricant properties and performance, specifically the viscosity, wear, and friction. The model is trained on the dataset to predict the wear and friction for a given viscosity, which can be used to identify the optimum lubricant. By analyzing a dataset …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 25–35 Read article
-
Short Review on Lubrication Coatings and Reduction in Friction
Abstract: Specialized Epoxy coatings with a low coefficient of friction can be applied to metal, glass, and plastic substrates. They produce long-lasting, slick surfaces that prevent wear and abrasion. These friction compounds are corrosion-resistant, chemically inert, and simple to maintain. Products are made to cut down on repair costs and increase element life. The coating is just a protective layer that is put to an object's surface, also known as the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 3, 2021 · pp. 28–32 Read article
-
Review Article on Biomedical Lubricant Hydrogels as Cartilage Substitutes
Abstract: This article underscores the increasing popularity of hydrogel lubricants in the biomedical domain and presents a comprehensive exploration of their potential as substitutes for cartilage. This understanding forms the foundation for the development of hydrogel-based lubricants that are designed to emulate these natural functionalities. Providing detailed insights, this article navigates through cutting-edge bio-inspired architecture techniques tailored to create hydrogels for cartilage. The emphasis is on achieving superior strength through diverse …
Published in Research & Reviews : Journal of Physics · Vol. 13, Issue 1, 2024 · pp. 35–48 Read article
-
Nanostructured Cr-WS2 Solid Lubricant Coating for Space Applications
Abstract: Abstract Tungsten disulphide (WS2) is one of the widely used intrinsic low friction materials, which is commonly used in the form of coating. WS2 offers very low coefficient of friction only in non humid conditions. Presence of humidity destroys this property and restricts its utility. Modifying the structure of WS2 by adding certain metals helps in overcoming this limitation and in addition improves the mechanical properties. Further, deposition technique and …
Published in Journal of Instrumentation Technology & Innovations · Vol. 9, Issue 1, 2019 · pp. 12–18 Read article
-
Comparative Study of Dry, Wet and MQL Lubricating Method on Aluminium 7075 Using Vertical Milling Machine
Abstract: In present time the technology of CNC vertical milling machine has been improved significantly to meet the advance requirements in various manufacturing fields, in which the major contribution is of biomedical field, automobile field and aerospace industries, so while machining to get better surface finish generally lubrication method is used, which also helps to maintain the temperature near interface of tool and workpiece. If the traditional cooling method is used …
Published in Journal of Mechatronics and Automation · Vol. 8, Issue 1, 2021 · pp. 12–19 Read article
-
Identification of Some Imported Lubricating Oil Additives Used in Libya and Synthesis of the Most Consumed Ones from the Local Raw Materials
Abstract: This paper presents the identified six additives imported under trade names used in the lubricating oil blending factory of A-Zawia-Libya. Their structures have been completely confirmed by examining their physical properties and using modern analytical techniques such as nuclear magnetic resonance spectroscopy (NMR), infra-red (IR), atomic absorption (AAS) and gas chromatography (GC). The synthesis of most important and more consumed additives in lubricating oils in Libyan oil industry from local …
Published in Journal of Catalyst & Catalysis · Vol. 3, Issue 3, 2016 · pp. 10–17 Read article
-
Experimental Investigation on the Effect of Jatropha Curcas Oil and Diesel Fuel Blend as a Fuel on Engine Components and Lubricating Oil
Abstract: Depletion of fossil fuel source and fluctuating fuel price led researchers to focus on developing new agro-based alternative fuels, which will provide sustainable solution to the energy crisis. The trend of using vegetable oil as an alternative fuel for diesel engine dated late 20th century but until now research is continued due to its benefis. Straight vegetable oils could be used directly but they need modification in order to minimize …
Published in Journal of Industrial Safety Engineering · Vol. 7, Issue 3, 2020 · pp. 36–45 Read article
-
Comparison Of Postoperative Sore Throat Following Endotracheal Intubation With Or Without Water Based Lubricating Jelly
Abstract: Background: Water-soluble lubricant gel (X-Y jelly) was evaluated for its ability to lessen the common throat pain that follows tracheal intubation under general anesthesia. Materials and Methods: scheduled for elective surgery under general anesthesia requiring endotracheal intubation, Were enrolled in a prospective, randomized, double-blind comparative study. They were split evenly into two -member cohorts. One cohort received 3 mL of water-soluble X-Y gel smeared from the cuff tip to 15 …
Published in Research and Reviews: A Journal of Health Professions · Vol. 15, Issue 3, 2025 · pp. 1–7 Read article
-
Examination of the Physicochemical Properties of Lube Oil on the Effect of Load Utilization in a Generator Set
Abstract: Evaluation of the performance of lube oil in the generator on the effect of load utilization was studied to examine the effect on the quality. The continuous running of the generator set, and the load utilization reduces the quality of the lube oil which influences the operational performance. The quality of the lube oil used in servicing generator set experienced degradation with increase in operational hours as well as loss …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 1, 2022 · pp. 1–9 Read article
-
Tribological Assessment of Chemically Modified Jatropha Curcas Oil Developed by Addition of Graphite Nanoparticles for Biolubricant Applications
Abstract: As an alternative to petroleum-based lubricants, environmentally friendly bio-based lubricants are gaining popularity in the lubrication industry. A sustainable bio-based lubricant, Jatropha Curcas Oil (JCO) incorporates nanoparticles as additives. Nevertheless, this oil cannot be used directly as a biolubricant due to its low oxidative stability. By redesigning the oil's molecular structure through chemical modification, this restriction can be overcome. Epoxidation and oxirane ringopening were the two steps used in this …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 47–58 Read article
-
A Technical Review on Evaluation of Vegetable Oil in Water-Emulsion Cutting Fluid in Machining Steel with Coated Carbide Tool
Abstract: In metal cutting industries, Metal working fluids (MWFs) or Metal cutting fluids (MCFs) are used; they act as coolant as well as lubricant. In industries synthetic and petroleum based cutting fluid as well as coolant produce negative effect on human health, ecology and environment. When tool and work piece are engaged with each other while machining due to engagement they produce heat. The metal cutting fluids effect on heat generation …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 3, 2017 · pp. 26–34 Read article
-
Recycling of Waste Generator Oils by Different Treatment Methods
Abstract: Engine oils with wide range of viscosities are used to lubricate an engine’s moving parts in different industrial units. Used engine oils are considered hazardous wastes because of their high content of pollutant ,thermal degradation products from the base oil and additives and combustion products from fuel and lubricant. The used oil still contains a large proportion of valuable base oil that may be used to formulate new lubricants if …
Published in Journal of Petroleum Engineering & Technology · Vol. 2, Issue 1-3, 2012 · pp. 103–115 Read article
-
Optimum Selection of Process Parameters of CNC End Milling Using Grey Relational Analysis (GRA)
Abstract: In this competitive world, to build a good quality product and productivity of any manufacturing corporation optimum selection of process parameters is very vital, when it comes to the desired dimension and tolerances in order to fulfill the purpose of the product. This paper explains the utility of grey relational analysis (GRA) for minimizing the machining time and lubrication thickness simultaneously, in vertical CNC end milling of Al-7075 T6. The …
Published in Journal of Production Research & Management · Vol. 8, Issue 3, 2018 · pp. 24–30 Read article
-
The Effect of using Grease on the Surface Roughness of Aluminum 1100 Sheet during the Single Point Incremental Forming Process
Abstract: Incremental forming is a sheet metal forming technique in which a uniform sheet is plastically deformed through the progressive action of a rounded tool. The movement of the tool is governed by a CNC machine. By this way the tool locally deforms the sheet through pure stretching deformation. In this research incremental forming experiments were carried out on Aluminum 1100 sheets to form a cone shape. Roughness was studied by …
Published in Trends in Machine design · Vol. 1, Issue 1, 2014 · pp. 1–4 Read article
-
Advancements in Engine Oil Durability, Performance, and Diagnostics Advancements in Engine Oil Durability, Performance, and Diagnostics
Abstract: The depletion of fossil fuels and environmental concerns have driven the search for alternative fuels and enhanced lubricants. This article explores advancements in machine oil durability, focusing on vegetable oil modifications, synthetic lubricants, and diagnostic methods for marine engine oils. A study comparing Karanja oil blends with mineral diesel in direct injection compression ignition engines revealed comparable wear characteristics and reduced metallic debris for Karanja oil-fueled engines. Investigations on synthetic …
Published in Journal of Petroleum Engineering & Technology · Vol. 14, Issue 3, 2024 · pp. 39–45 Read article