Search
74 articles for “fly ash”
-
Mechanical Characterization of Al6061 Hybrid Composites Reinforced with Boron Carbide and Fly Ash via Stir Casting
Abstract: The growing demand for lightweight, cost-effective, and high-performance materials in structural and automotive sectors has accelerated the development of hybrid metal matrix composites (HMMCs). This study investigates Al6061 alloy as the matrix material, reinforced with varying weight fractions of boron carbide (B₄C), a high-hardness ceramic, and fly ash, an economical industrial byproduct, to assess their synergistic effects on mechanical properties. Hybrid composites were synthesized using the stir casting technique to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1711–1719 Read article
-
Impact of Fly Ash Pollution on Quality of Agricultural Soils Around Thermal Power Station
Abstract: The coal-fired Khaparkheda Thermal Power Station (KTPS) and its fly ash pond in Nagpur District, Maharashtra, India has been responsible for serious fly ash pollution incidents of agricultural soil. The present study was carried out on the quality of soil samples around the fly ash pond and KTPS. The physicochemical and chemical characteristics of soil samples were observed to be affected due to fly ash pollution. The fertility of soil …
Published in Research & Reviews : Journal of Ecology · Vol. 14, Issue 1, 2025 · pp. 6–17 Read article
-
Impact of Composite Materials by Silica Fume and Fly Ash in Cement and Partial Substitution of Fine Aggregate Using Quarry Dust in Steel Fibre Concrete
Abstract: Mineral admixtures can be added to concrete to replace some of the cement, increasing its overall strength. Fly ash (FA) and silica fume (SF) are two often used mineral admixtures. A series of experiments were conducted to investigate the effect of adding varied amounts of fly ash and a consistent amount of silica fume on concrete strength by using the same amount of substitute for cement and the same water-binder …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 139–147 Read article
-
Enhancing Mechanical and Durability Properties of Coconut Shell Concrete Using Fly Ash
Abstract: The increasing demand for sustainable and lightweight construction materials has driven research into alternative aggregates for concrete production. This study investigates the mechanical and durability properties of coconut shell (CS) concrete with varying percentages of fly ash replacement. The research evaluates compressive strength, split tensile strength, water absorption, and workability to determine the feasibility of CS concrete as a structural material. Experimental findings indicate that incorporating 10% fly ash (CSF10 …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 19–24 Read article
-
Improving Black Cotton Soil with Sodium Hydroxide and Fly Ash: An Assessment of Optimum Moisture Content, Dry Density, and California Bearing Ratio
Abstract: This study investigates the stabilization of Black Cotton Soil (BCS), an expansive clayey soil primarily composed of montmorillonite minerals, using sodium hydroxide (NaOH) and fly ash. Due to its high plasticity and significant volume changes with moisture, BCS is challenging for construction purposes. Adding NaOH and fly ash can potentially improve the soil's moisture tolerance, compressibility, and reduce its plasticity, making it more suitable for structural applications. The research evaluates …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 192–201 Read article
-
Performance of Sisal Fiber Concrete Using Fly Ash and Silica Fume Enhancements
Abstract: The construction industry has advanced significantly in constructing innovative structures using diverse materials. Various waste materials such as fly ash, sawdust, and residues of natural fibers have been utilized in the construction industry. Addressing these concerns requires exploring low-cost, environmentally friendly, and sustainable materials. This paper aims to investigate mixing silica fume, fly ash, and sisal fiber into concrete to address waste disposal and global warming issues while creating stronger …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 2, 2024 · pp. 63–74 Read article
-
Evaluation of Compressive Strength of Concrete Using Fly Ash, Silica Fume, and Steel Slag as Cementitious and Aggregate Replacements
Abstract: This study comprehensively investigates the influence of supplementary cementitious materials and industrial by-products—specifically fly ash, silica fume, and steel slag—on the compressive strength of concrete. The primary objective is to evaluate the impact of both individual and combined replacements of cement and aggregate components on concrete performance. The research analyzes how varying proportions of these materials affect the strength characteristics of the concrete mixtures. Experimental results demonstrate that increasing the …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 3, 2025 · pp. 1–6 Read article
-
Polymer-Modified Fly Ash Concrete as A Sustainable Cementitious Composite for Low-Carbon and Durable Infrastructure
Abstract: There is a need for sustainable cementitious composites in the construction industry which can help in reducing carbon emission and also increase the durability of the constructed infrastructure. The utilization of fly ash can not only benefit the environment, but also by adding polymer modifiers, a high-performance and low-carbon composite material polymer modified fly ash concrete (PMFAC) can be produced. The study examines the engineering potential and sustainability of PMFAC …
Published in Journal of Polymer & Composites · Vol. 14, Issue 6, 2026 Read article
-
Investigation on Mechanical Properties of Geo Polymer Concrete With Fly Ash and Steel Fibers
Abstract: The goal of this project was to manufacture fly ash-based geopolymer concrete (FAC), a more environmentally friendly substitute for conventional Portland cement concrete (OPC) by using fly ash (FA) in place of cement. The study discovered that the properties of FAC were comparable to those of OPC, and that the concrete's performance was greatly impacted by the geopolymer's polymeric nature. The geopolymerization process was started with an alkaline solution, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 250–260 Read article
-
Service Life Prediction of Concretes Incorporated with Fly Ash and Alccofine with respect to Chloride Ion Penetration
Abstract: Chloride-induced corrosion poses a significant threat to the degradation of reinforced concrete structures, especially in extreme environments such as marine and industrial exposure conditions, where the damage can be particularly severe. This study provides an experimental investigation utilizing three distinct water-binder ratios (0.3, 0.4, and 0.5) applied to three types of concrete mixtures: conventional concrete, concrete blended with 40% fly ash, and concrete blended with 40% fly ash and 2% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 202–213 Read article
-
Performance Evaluation of High-Performance Fiber Reinforced Concrete Incorporating Fly Ash, Coir Husk Ash, and Hybrid Fibers
Abstract: High-Performance Fiber-Reinforced Concrete (HPFRC) is an advanced composite material designed to improve the mechanical properties and durability of conventional concrete. This study investigates the effects of fly ash (FA), coir pith ash (CPA), and various fiber reinforcements (polypropylene, coir, and kenaf) on the compressive strength of HPFRC. The research evaluates the influence of natural admixtures, single fiber additions, and hybrid fiber combinations to optimize mix proportions for enhanced structural performance. …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 2, 2025 · pp. 10–15 Read article
-
Experimental Study and Comparative Analysis of Fly Ash, GGBS, and Silica Fume in Nominal Concrete and Ternary Blended M25 Concrete
Abstract: This study examines the effects of partially substituting 30% of cement by weight with ternary supplemental cementitious materials (TSCMs) with mix proportions of M1, M2, and M3. These materials include fly ash (10%,15%,15% in M1, M2, and M3), ground granulated blast furnace slag (GGBS) (10%,8%,10% in M1, M2, and M3), and silica fume SF (15%,10%,5% in M1, M2, and M3) on the mechanical and durability properties of M25 grade concrete …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 43–50 Read article
-
Multi-Objective Optimization of Geopolymer Cement Block Parameters Using Bentonite and Fly Ash
Abstract: Presently, geopolymer blocks are being produced by using industrial by-products like fly ash. This study focuses on the development of geopolymer cement blocks using the composition of bentonite and fly ash. The specific objective is to examine and optimize the geopolymer cement block parameters using a novel composition. The oxide ratio, alkali activator ratio, and molarity are considered variables. In contrast, the responses are considered as flow table, fresh density, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 810–828 Read article
-
Investigating Flexural Behavior in Cyclic Loading of Fly Ash-Based Green Concrete
Abstract: The construction industry is increasingly embracing sustainable materials, and geopolymer concrete (GPC) has emerged as a promising eco-friendly alternative to Ordinary Portland Cement (OPC). Derived from industrial by-products such as fly ash, GPC offers significant environmental advantages by reducing greenhouse gas emissions associated with conventional cement production. This study explores the monotonic and cyclic performance of fly ash-based GPC, with a focus on its mechanical and structural behavior. Key properties, …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 1, 2025 · pp. 1–5 Read article
-
Characterization and Fabrication of Hybrid Matrix Composites of AZ91E Metal with Distinct Reinforcements of Fly Ash and ZrO2
Abstract: The current work choose the characteristics of (Magnesium composite) AZ91E-ZrO2-Fly ash Hybrid Metal Matrix using the regular analytic system. The chosen materials for this purpose are fly ash and ZrO2 in equivalent load extents, Stir casting uses a vortex technique to produce composite materials. A comprehensive experimental investigation was conducted to assess the performance characteristics of AZ91E-ZrO2-Fly ash during the cold upsetting process. The study involved utilizing AZ91E magnesium alloy …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 Read article
-
Optimization of Fly Ash and Granulated Blast Furnace Slag (FA-GBFS) Mixes for Flexible Pavements
Abstract: This study investigates the compaction, strength, and permeability characteristics of fly ash (FA) stabilized with granulated blast furnace slag (GBFS) to determine the optimal mix proportions for geotechnical applications. Standard Proctor compaction, unconfined compressive strength (UCS), California Bearing Ratio (CBR), and permeability tests were conducted on FA-GBFS mixtures, with GBFS content varying from 10 to 50% by dry weight. The results indicate that increasing GBFS content enhances the maximum dry …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 2, 2025 · pp. 14–19 Read article
-
Performance Evaluation of Modified Concrete Incorporating Fly Ash, Silica Fume, Rice Husk Ash, and Calcium Nitrate
Abstract: The growing demand for sustainable and high-performance concrete has led to the incorporation of supplementary cementitious materials (SCMs) and chemical admixtures to enhance mechanical and durability properties. This study investigates the effect of 15% fly ash, 10% silica fume, 10% rice husk ash, and 3% calcium nitrate as a partial replacement for cement in M25 and M30 grade concrete. Experimental results demonstrate that the modified concrete exhibited an increase in …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 2, 2025 · pp. 35–39 Read article
-
A Study on Fracture Sem Analysis by Optimization of FSW When a Composite Material Al 6061 Mixed with Fly Ash is Done with Cooper Using Anova Method
Abstract: The current study aims to examine how different parameters in friction stir spot welding influence hardness and tensile strength, while identifying the most suitable parameter combinations to enhance the overall quality of the fabricated components. The experimental work involves joining dissimilar materials, where one specimen consists of Aluminum alloy 6061 reinforced with 10% fly ash, and the other is a copper alloy. Various process conditions are altered during testing to …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 1–5 Read article
-
Mathematical Modeling Analysis of India's Accident &Use of Fly Ash and Polymers in Road Safety
Abstract: Accident predicting models (APMs) are exceptionally strong tools for adaptation and mitigation strategies because they have the ability to predict both the severity and frequency of crashes. Road accidents are a major problem all throughout the world, especially in developing countries. Understanding the key variables that contribute can assist in reducing the frequency of traffic collisions. This study also discovered recent developments on fly ash, green composites, other polymer materials …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 488–499 Read article
-
Evaluation of Fly Ash/ZrO2 Reinforced AZ91E Hybrid Composites Based on Wear and Friction Characteristics
Abstract: In the current study the compo-casting Al alloy MMCs' wear resistance was examined under a variety of abrasive circumstances, including coefficient friction, wear rate and it’s sliding distance. The AZ91E matrix composite was made by the liquid metallurgy process and reinforced with aluminum plated zirconium dioxide (ZrO2) particles. Designers examined the characteristics of matrix alloys along with created composites. friction and wear from dry sliding experiments had been performed on …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 324–338 Read article