Search
70 articles for “flow characteristics”
-
Improving the Performance of Self-compacting Concrete Using Optimized Admixture Combinations
Abstract: This study explores the influence of various admixture combinations on the performance of Self-Compacting Concrete (SCC), with an emphasis on its flow behavior, compressive strength, tensile strength, flexural strength, and resistance to impact. Various admixtures, including Air-Entraining Agent (AEA), Water-Reducing Plasticizer (WPC), Retarder (RET), and Accelerator (ACC), were incorporated into the SCC reference mix (SP + VMA) to evaluate their impact on SCC performance. A series of tests—such as slump …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 81–89 Read article
-
Aerodynamic Analysis of Foliage Stimulated Airfoil Design for Enhanced Strength with Carbon Fibre-reinforced Polymer
Abstract: Ever since the beginning of aviation, there has been an unwavering desire to improve airfoil design in order to improve aircraft performance. This insatiable desire for improvement has driven innumerable aerodynamicists to create a diverse range of revolutionary airfoils. This research investigates a revolutionary method to airfoil design, inspired by the complicated structures and aerodynamic qualities of natural leaves. Using biomimicry, the project seeks to increase the performance and efficiency …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 560–616 Read article
-
Mathematical Modelling on Unsteady Blood Flow and Unsteady Heat Transfer Through a Stenosed Artery with Hematocrit and Slip Velocity
Abstract: A theoretical investigation concerning variable viscosity dependent on percentage concentration of red blood cell interm of total volume of blood (hematocrit) and slip velocity on unsteady flow of blood and heat transfer has been carried out. The analytical expressions for the flow characteristics and the heat transfer rate, including the velocity profile, volumetric flow rate, flow resistance, wall shear stress, and temperature profile, were obtained using the weighted residual method, …
Published in Research & Reviews: Discrete Mathematical Structures · Vol. 12, Issue 2, 2025 · pp. 16–36 Read article
-
Computational Analysis of Non-Newtonian Blood Flow through Bifurcated Coronary Artery: Insights into Hemodynamics and Wall Shear Stress
Abstract: This abstract presents a study on the computational fluid dynamics (CFD) simulations of blood flow through a bifurcated coronary artery using non-Newtonian fluid model. The objective of this study is to investigate the hemodynamic characteristics in Bifurcated Coronary artery. The methodology involved the utilization of ANSYS SpaceClaim software for creating a geometric model of the bifurcated coronary artery. A mesh independent study was conducted to ensure the accuracy and reliability …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 160–168 Read article
-
A Literature Review on Extrusion/Spheronisation-A Pelletization Technology
Abstract: Extrusion-spheronization is a leading pelletization technology, widely favored for its economic and commercial viability. It is a cost-effective method suitable for large-scale production, making it the most efficient approach for oral drug delivery. This process provides multiple benefits, such as improved flow characteristics, lower friability, a narrow particle size range, easier coating, consistent packing, reduced likelihood of dose dumping, and more predictable gastric emptying. Pellets usually measure between 0.5 and …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 16, Issue 1, 2025 · pp. 61–71 Read article
-
Advances in Pipe Flow Systems, Turbulence, and Combustion Processes in Fluid Mechanics
Abstract: Fluid mechanics plays a critical role in the design and optimization of engineering systems involving fluid transport, energy conversion, and thermal processes. This review presents recent advances in pipe flow systems, turbulence behavior, and combustion processes, highlighting their interdependence in modern applications. Pipe flow systems are essential in industries such as water distribution, oil and gas transport, and chemical processing, where flow characteristics are influenced by factors such as pressure, …
Published in Recent Trends in Fluid Mechanics · Vol. 13, Issue 1, 2026 · pp. 1–7 Read article
-
Numerical Simulation of Transient Free Convection in a Rectangular Cavity Filled with Porous Material Using Finite Element Formulations
Abstract: In this study, the finite element method is used to quantitatively explore transient free convection in porous cavities in order to understand the flow characteristics and heat conduction processes in the square cavities. In comparison to an uniform temperature gradient, the left wall is swiftly heated and the right wall is allowed to cool to a specific temperature. The horizontal walls are insulated on both sides. Dimensionless representations of the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 1–10 Read article
-
Parametric Investigations of Melt Flow Index for Nylon6-Mica Composite Based Hybrid FDM Filament
Abstract: The development of new hybrid filaments with improved mechanical and thermal properties has been driven by the increasing need for high-performance materials in additive manufacturing. This study explores the parametric investigations of the Melt Flow Index (MFI) for Nylon6-Mica composite-based hybrid Fused Deposition Modeling (FDM) filament. The investigation uses the Taguchi technique to examine how different extrusion temperatures, loads and the percentage of Mica filler affect the MFI, a critical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 165–173 Read article
-
Integrated Perspectives on Fluid Mechanics and Energy Transport in Complex Flow Systems
Abstract: Fluid mechanics plays a central role in understanding the transport of mass, momentum, and energy in complex flow systems encountered in both natural and engineered environments. This review presents an integrated perspective on fluid behavior by combining fundamental principles with modern approaches to energy transport analysis. The study emphasizes the significance of conservation laws and their application to diverse flow regimes, including laminar, turbulent, compressible, and multiphase flows. Energy transport …
Published in Recent Trends in Fluid Mechanics · Vol. 13, Issue 1, 2026 · pp. 22–31 Read article
-
Enhancing Bituminous Mixes with Recycled Polyethylene: Performance Analysis Using Marshall Stability Test
Abstract: This study investigates the impact of incorporating recycled low-density polyethylene (LDPE) and high-density polyethylene (HDPE) in bituminous mixes for potential use in flexible pavement construction. Utilizing a Marshall Stability Test, various proportions of LDPE and HDPE were analyzed to determine optimal stability and flow characteristics. The test maintained a fixed Zycotherm content at 1.5% and varied LDPE content from 2% to 5% by weight, while HDPE content was also tested …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 1–5 Read article
-
Enhancement of Horizontal Jet Impingement Heat Transfer Analysis on Vertical Flat Plate
Abstract: This research investigates the heat transfer characteristics and heat flux distribution associated with parallel jet impingement on a vertical flat plate. A comprehensive computational fluid dynamics (CFD) analysis is carried out and systematically validated against available experimental data to ensure the accuracy and reliability of the numerical model. The jet length is maintained constant at 12 mm, while the jet-to-plate separation distance is varied at 6, 12, 18, and 24 …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 1, 2026 · pp. 65–80 Read article
-
Effect of Blunt Truncation in an Aerospike Nozzle
Abstract: Aerospike nozzles are gaining attention as a more advanced alternative to conventional bell nozzles, mainly because they can perform efficiently across a wide range of altitude conditions. Unlike traditional converging–diverging nozzles, aerospike designs naturally adjust to changes in ambient pressure, allowing the exhaust flow to expand more effectively. This results in better thrust performance under varying operating conditions, making them a strong candidate for future aerospace propulsion systems. In this …
Published in Journal of Aerospace Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Preparation and Characterization of Polyolefins/Inorganic Nano-Filler Nanocomposites via Melt Extrusion Process
Abstract: This work used the melt-mixing method followed by compression molding to create nanocomposites of polyolefins, such as high-density polyethylene and linear low-density polyethylene, packed with both surface-modified and unmodified nano-calcite. The study examined the effects of varying concentrations of nano-calcite, which had been modified using isopropyl tri-(dioctylpyrophosphato) titanate, on the mechanical properties, morphological characteristics, and flow behavior of the resulting nanocomposites. A corotational twin-screw extruder was utilized to manufacture three …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 26, Issue 3, 2024 · pp. 35–43 Read article
-
Currents, Waves, and Whirls: An Academic Exploration of Fluid Mechanics
Abstract: Fluid mechanics investigates the behavior of liquids and gases in motion and at rest, revealing the principles that control natural occurrences and engineering systems alike. This article gives an easy review of essential concepts such as fluid characteristics, pressure, flow patterns, and the contrast between laminar and turbulent flow. It explores how fundamental rules, including conservation of mass and energy, impact the transport of fluids across varied settings. Through real-world …
Published in Recent Trends in Fluid Mechanics · Vol. 13, Issue 1, 2026 · pp. 8–13 Read article
-
Experimental Study on Fresh and Mechanical Properties of Crimpled Steel Fibers in Self-compacting Concrete
Abstract: The flow and strength characteristics of fiber-reinforced self-compacting concrete (SCC) with different aspect (l/d) ratios of fibers are recommended to be studied. After achieving a satisfactory SCC mix, crimped steel fibers with l/d ratio 30 are designated as CSF30; with l/d ratio 40 are designated as CSF40, with l/d ratio 50 is designated as CSF50 and with l/d ratio 62.5 is designated as CSF62.5 fibers are added at a fixed …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 65–75 Read article
-
A Computational Study of Lift and Drag Characteristics for NACA 4415 and NACA 2412 Aerofoils
Abstract: The performance of an aerofoil is crucial in designing wind turbine blades, aircraft wings, and other aerodynamic surfaces. This project presents a comparative analysis of two widely used aerofoil profiles, NACA 4415 and NACA 2412, to study their lift and drag characteristics under different flow regimes. The aerofoil geometries were developed using the NACA four-digit notation and modeled in ANSYS Design Modeler. Numerical simulations were conducted in ANSYS Fluent for …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1298–1315 Read article
-
Analyzing the Sheet Metal Extrusion Process Using Finite Element Analysis
Abstract: A wide range of sheet metal forming techniques has been developed to make it easier to produce intricate 3D objects. However, the knowledge still isn't sufficient. The sheet metal extrusion method was examined in this research as one of the common sheet-bulk metal manufacturing technologies. Consideration of the flow-stress curve's impact across a broad range of plastic strain and ductile damage played a pivotal role in constructing a realistic finite …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 1, Issue 1, 2023 · pp. 13–25 Read article
-
Modeling and Simulation of Radiative MHD Casson-Type Polymer Composite Flow over a Porous Wedge with Variable Thermal Source and Sink
Abstract: This study presents a numerical investigation of the radiative magnetohydrodynamic (MHD) flow and heat transfer characteristics of a Casson-type polymer fluid over a moving and extending porous wedge under the influence of a spatially varying heat source and sink. The Casson fluid model, representing a class of viscoplastic polymeric materials, is analyzed within the MHD framework to explore the combined effects of magnetic field intensity, rheological behavior, and porous medium …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 837–850 Read article
-
Dynamic Simulation of Load-Responsive Vapor Compression Refrigeration Systems
Abstract: Because of their dependable operation and effectiveness, vapor compression refrigeration systems, or vapor compression refrigeration (VCRS), have become popular in commercial, industrial, and residential settings. However, under different thermal loads, classic vapor compression refrigeration (VCR) systems may perform less well in that they are usually built for steady-state conditions and run at consistent speeds. In order to improve a load-responsive VCR system’s flexibility, energy efficiency, and response to changing cooling …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 12, Issue 2, 2025 · pp. 32–37 Read article
-
Fabrication and Characterization of PLA-CSP Composites via FDM for Biodegradable Food Packaging
Abstract: In light of the growing need for environmentally friendly alternatives to conventional plastic packaging, this study presents the design of a food-grade, biocompatible packaging material composed of Polylactic Acid (PLA) and packed with coconut shell powder (CSP). One of the most well-known thermoplastic polymers, PLA is produced from renewable resources like sugarcane or maize starch. Its nontoxicity, biodegradability, and adherence to food safety standards and regulations provide energy. Unfortunately, PLA's …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1016–1025 Read article