Search
147 articles for “epoxy composite”
-
Wear Performance of Cylindrical Shaped Alumina Nanoparticles Filled Epoxy Composite
Abstract: Low cost high specific strength epoxy LY 556 and alumina nano filler is utilized in current research for developing a epoxy composite. A liquid dispersion method was adopted for fabricating epoxy alumina composite having 0.50 wt% of alumina reinforcement. For uniform and homogenous dispersion of reinforcement, ultra-sonification of 120 W is adopted. To study the effect of particle behavior, unfilled epoxy and 0.5 wt.% cylindrical alumina oxide filled epoxy composite …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 94–100 Read article
-
Evaluation of Mechanical Properties of Arecanut Fiber Reinforced Epoxy Composite
Abstract: This study investigates the mechanical performance of arecanut fiber-reinforced epoxy composites, aiming to evaluate their potential for sustainable industrial applications. Arecanut husk fibers, an agricultural waste product, were selected for their natural abundance and biodegradability. To enhance fiber-matrix bonding, the fibers were chemically treated with sodium hydroxide (NaOH), which effectively removes lignin, hemicellulose, and other impurities, improving surface roughness and interfacial adhesion. The treated fibers were then incorporated into an …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 389–400 Read article
-
Mechanical Characterization of Prosopis Juliflora Fibre-Reinforced Epoxy Composites for Sustainable Automotive Applications
Abstract: This study investigates the potential of Prosopis juliflora (PJ) fibre as an eco-friendly, economical, and mechanically efficient reinforcement for epoxy-based polymer composites. Composite samples were produced using the compression moulding technique with epoxy-to-fibre weight ratios of 90:10, 85:15, and 80:20. Mechanical tests, including tensile, flexural, impact, and hardness evaluations, were conducted in accordance with relevant ASTM standards. The incorporation of PJ fibre resulted in significant improvements in the mechanical behaviour …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1720–1728 Read article
-
Development and Evaluation of Sodium Hydroxide-Treated Jujube Pit Reinforced Epoxy Composites
Abstract: The automotive sector has experienced a tremendous transformation, propelled by the increasing demand for materials that provide a balance between mechanical performance, economic efficiency, and environmental sustainability. In accordance with worldwide sustainability goals, the trend has moved toward the utilization of lightweight, recyclable, and biodegradable materials in modern vehicle architecture. Natural composite materials, which are derived from renewable resources such as seeds, leaves, and tree barks, have gained considerable attention …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 494–501 Read article
-
Development and Assessment of Mechanical Characteristics in Sisal-Glass Fiber Reinforced Epoxy Composites
Abstract: In many different fields, including tensile strength, reduced thermal expansion, and an amazing strength-to-weight ratio, fiber-reinforced polymer composites are gradually replacing conventional materials. This work mostly addresses the development and evaluation of the mechanical characteristics of epoxy composites improved with glass fibers and sisal. Among the benefits are biodegradability, lower weight, and more specific strength. Sisal polymer composites are included under natural fiber composites. Including sisal strands into glass fiber-reinforced …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 708–719 Read article
-
Comprehensive Study on the Mechanical And Tribological Response of Waste Tyre Rubber–Natural Fiber Hybrid Epoxy Composites
Abstract: Research into the mechanical and tribological characteristics of Prosopis juliflora-fiber reinforced epoxy-matrix composites with recycled tyre rubber particles is the focus of this investigation. Making use of old tire rubber and bio-reinforcing with fibers from the common invasive plant Prosopis juliflora are the goals of the two-reinforcement technique. The end goal is to produce long-lasting, cost-effective engineered composite materials with improved performance. A constant epoxy resin matrix was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Basalt Fiber, Palm Fiber, and Seashell Powder Reinforced Hybrid Epoxy Composites: A Mechanical Characterization
Abstract: This study investigates epoxy-based composites reinforced with basalt fiber, palm fiber, and seashell powder fabricated via hand lay-up. Mechanical characterization included tensile, flexural, hardness, and impact testing, supported by ANOVA and TOPSIS analyses. The Basalt-Epoxy composite has the highest mechanical strength among the systems under investigation, with a tensile strength of 275 N/mm² and a yield stress of around 215 N/mm². Compared to Palm-Epoxy composite, which has the lowest mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1565–1575 Read article
-
Experimental Analysis and Predictive Modeling of Mechanical Behavior in Epoxy Composites Reinforced with Waste Tyre Rubber Particles
Abstract: The disposal of end-of-life tyres poses a significant environmental and resource challenge owing to their large volumes and non-biodegradable nature. In this work, we explore the incorporation of waste tyre rubber particles (WTRP) into an epoxy resin matrix to develop sustainable polymer composites and examine their mechanical behavior both experimentally and through predictive modelling. Composites with differing epoxy: WTRP ratios (80:20, 75:25, 70:30 wt.%) and varying rubber particle mesh sizes …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1754–1765 Read article
-
Experimental Evaluation of Carbon Fiber Reinforced Epoxy Composites for Structural Applications
Abstract: Composites made of carbon fibre reinforced polymer (CFRP) are currently one of the most widely used material classes in advanced engineering applications because of their remarkable environmental resistance, dimensional stability, and strength-to-weight ratio. The vacuum bag moulding method was used in this study to create CFRP laminates with different fiber-to-resin weight ratios: 50:50, 55:45, 60:40, 65:35, and 70:30. The reinforcement phase was made of unidirectional carbon fibre fabric and the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 401–415 Read article
-
Bending and Single Edge Notch Bending Test (SENB) Investigation of Natural Fiber- Reinforced Epoxy Composites using Machine Learning
Abstract: The present study aims to determine the behavior of hemp fiber-reinforced epoxy composites in terms of bending behavior and fracture toughness under bending load resembles the substitutive behavior of existing synthetic composites. The fabrication was carried out by hand lay-up assembly of hemp fiber with Lapox-12 epoxy resin volume fraction of 60:40 fiber: matrix volume. Flexural testing revealed an average strength of 93.5 ± 2.8 MPa and SENB testing revealed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 59–69 Read article
-
Fabrication and Testing of Physical Behavior of Coconut Shell Micro Particulate and Walnut Shell Micro Particulate Reinforced Epoxy Composites
Abstract: Enhancing the physical characteristics of high-performance materials is largely dependent on the reinforcement of polymers by microparticles. The physical behavior of polyester composites containing coconut and walnut shell microparticles was thus investigated in order to create an engineering material for industrial use. Most researchers investigated the flammability test of fiber bio-composites only. There is a possibility that two particular polymers embedded in a thermoset polymer matrix could provide the lowest …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 592–603 Read article
-
Experimental Investigation of Hybrid Natural Fiber Reinforced Epoxy Composites Using Banana and Sugar Palm Fibers
Abstract: This paper is a research study that examines the mechanical and morphological properties of hybrid natural fiber reinforced epoxy composites manufactured from banana fibers (BF) and sugar palm fibers (SPF). Because the use of sustainable, lightweight, and cost effective materials in engineering continues to grow, many engineers are looking at the possibility of utilizing natural fiber reinforced polymer composites as alternatives to traditional man-made fiber composites. Hybrid composite laminate samples …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 195–205 Read article
-
Enhancing Mechanical and Thermal Properties of Glass Fiber-Reinforced Epoxy Composites with Silicon Carbide Additives
Abstract: This study explores the production and characterization of glass fiber-reinforced epoxy resin composites enhanced with silicon carbide (SiC) as a reinforcing filler. The primary objective is to evaluate the impact of SiC on the mechanical, thermal, and morphological properties of the composites. Four different samples with varying SiC weight fractions (0%, 5%, 10%, and 15%) were prepared, keeping the glass fiber content constant. The composites were fabricated using a combination …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 69–77 Read article
-
Hybrid Epoxy Composites with Areca and Abaca Fibers: Effect of Nano-SiO₂ on Mechanical Properties
Abstract: This study explores the fabrication and mechanical evaluation of sustainable epoxy-based hybrid composites reinforced with Areca fiber (ARF), Abaca fiber (ABF), and nano-silica (SiO₂). The composites were made using a hand layup process, maked five variants (S1–S5) with ARF content ranging from 0–40 wt% and nano-silica content from 0–8 wt%, while maintaining ABF as the primary reinforcement. Mechanical performance was assessed through tensile strength (TS), flexural strength (FS), and impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 606–613 Read article
-
Study of Thermal Conductivity and Hardness of Coir Fiber Reinforced Epoxy Composite
Abstract: Researchers are drawn to polymer reinforced natural fibers composite for the development of new materials. The research aims to use waste fibers, specifically coir, to create polymer composite materials. Thermal conductivity and hardness of the composite results are determined under various conditions. Coir fiber is used as the reinforcement material and Coir powder is used as the filler material in the study. In the case of the matrix, the epoxy …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1576–1582 Read article
-
Flexural Response and Numerical simulation of Unidirectional Areca–Pineapple Leaf Fiber Hybrid Epoxy Composites
Abstract: The increasing demand for lightweight and environmentally sustainable materials has accelerated the development of natural fiber-reinforced polymer composites for engineering applications. In the present study, unidirectional areca and pineapple leaf fiber (PALF) reinforced hybrid epoxy composites were fabricated using a simple hand lay-up process. Before fabrication, the fibers were chemically treated to improve fiber–matrix adhesion and enhance the mechanical performance of the laminates. Four different stacking sequences (A8, A7P1, A6P2, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Tensile and Flexural Strength Quantification of Basalt-Reinforced Epoxy Composites Fabricated via Vacuum-Assisted Resin Transfer Molding at Varied Fiber Volume Fractions Description
Abstract: Fiber-reinforced polymer composites have been identified to possess excellent properties that render them very suitable in the aerospace, automotive, marine and renewable energy sectors. However, for the industrially scalable vacuum-assisted resin transfer molding (VARTM) process, optimization of mechanical properties of basalt epoxy composites must be achieved systematically, which means that the effect of the fibre volume fraction(VF) on the mechanical properties of the composite needs to be quantified for different …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Mechanical and Sustainable Enhancement of Epoxy Composites using Tamarind Seed Powder
Abstract: The investigation examines how tamarind seed powder affects epoxy-based materials for the development of waste-based useful products. The research examines the mechanical behavior of epoxy resin composites which contain tamarind seed powder in increasing percentages spanning from 10% to 40%. The team utilized the hand layup method to produce the composites which then fulfilled the ASTM guidelines for specimen fabrication for mechanical tests. The study examined fundamental mechanical parameters by …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 797–806 Read article
-
Mechanical Analysis and Advanced Manufacturing of Eco-Friendly Groundnut Shell Powder Reinforced Epoxy Composites
Abstract: Polymer composites reinforced with natural materials are gaining significant attention because of their eco-friendly nature, cost-effectiveness, and favorable mechanical properties. This research explores the creation and mechanical analysis of epoxy composites strengthened with groundnut shell powder (GSP), exploring both untreated and benzoyl chloride-treated GSP variations. The research emphasizes utilizing agricultural waste material while achieving enhanced mechanical properties through surface modification and advanced fabrication techniques. The composites were manufactured using the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 174–185 Read article
-
Effect of Nanoclay Loading on Physical and Mechanical Properties of Epoxy Composites
Abstract: The effects of multilayer silicate loading on hardness, tensile, and impact properties were examined by developing epoxy–nanoclay composites with 0–5 wt% nanoclay. A desirable compromise between reduced void content and higher Shore D hardness was reached with an ideal nanoclay loading of 3 wt%, which reflected improved load transfer and increased matrix stiffness as a result of limited polymer chain mobility. Tensile strength and modulus rose up to 3 wt% …
Published in International Journal of Advance in Molecular Engineering · Vol. 4, Issue 1, 2026 · pp. 36–45 Read article