Search
147 articles for “design of experiment and composites”
-
Experimental Analysis and Design Proposal of Banana Fiber Reinforced Polymer Composites and Computer Analysis
Abstract: This study presents a comprehensive experimental investigation and design model development using banana fiber reinforced polymer (BFRP) composites. The primary aim is to evaluate the mechanical and physical performance of the composite, with particular emphasis on tensile strength, flexural strength, and water absorption characteristics. These properties are critical for applications in industries such as transportation and construction, where durability, lightweight materials, and cost-effectiveness are essential. Banana fibers, being natural, renewable, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 901–907 Read article
-
An Experimental Investigation on the Characterization of Al6061-Polymer Adhesive Joint by Design of Experiment
Abstract: Aluminium alloys and polymers are the light-weight materials extensively used in structural, aero-space, automobile and marine applications. Al6061 alloy and nylon 6 were joined through the adhesive bond and their characteristics were analyzed. However, joining of these dissimilar materials for the evolution of hybrid engineering structures were complex because of their difference in physical, chemical and mechanical behaviours. The Taguchi’s, Design of Experiment were conducted on the various mixture of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 206–219 Read article
-
Properties of Biodegradable Films based on Pectin, Mango Kernel Flour and Unrefined Palm Oil
Abstract: This study allowed to develop biodegradable films based on pectin, incorporating mango kernel flour and unrefined palm oil, whose physical and mechanical properties were investigated. Results highlighted the feasibility of developing of these composite films. The film properties showed variability in color, physical, barrier and mechanical properties, depending to concentration of ingredients. Biodegradable films obtained are homogeneous, non-cracked, uniform, and color is mainly orange. Opacity of films increased with the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 52–62 Read article
-
Evaluating UX Design Factors Affecting Efficiency of Composite Material Design and Analysis Platforms
Abstract: Within engineering software platforms that involve the design, simulation and characterization of composite materials, user experience (UX) design has become a key determinant for efficient use. This research aims to quantify how user experience design parameters relate to productivity in composite engineering workflows by analyzing the relationship between usability, learnability, accessibility, complexity of the UI, navigation efficiency and users engineering results satisfaction. Computational techniques in python were used in the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 341–366 Read article
-
Multi-Objective Optimization of Carbon-Glass Fiber Polymer Drilling Process Based on Fuzzy Grey Entropy Weighing Method
Abstract: In recent years, the machining characteristics of hybrid fiber polymer composites have garnered significant research attention due to their growing industrial applications. This study specifically focuses on the drilling of hybrid carbon-glass fiber reinforced (CGFR) epoxy composites, fabricated using the hand layup technique. The key machining characteristics evaluated in this drilling process include surface roughness and circularity error. The influence of critical drilling process parameters, such as spindle speed, drill …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 100–112 Read article
-
Wear Attribute of Aluminium Metal Matrix Composite Reinforced With MWCNT, Produced By FSP, On A Vertical Milling Machine
Abstract: The exceptional properties of Aluminium metal matrix composites (AMMCs) like good hardness, specific strength, enhanced wear rate made huge demand in the automobile and aerospace industries. The classical methods of manufacturing AMMCs leave problems at the interface of matrix and reinforcement segregation, like an agglomeration of reinforcements, wettability etc. To overcome this, an alternate, innovative method of fabricating aluminium matrix surface composites has been invented, which is termed friction stir …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 525–539 Read article
-
Artificial Intelligence-Assisted Multi-Objective Optimization of Agricultural Biomass-Reinforced Polymer Composites
Abstract: Agricultural biomass can reduce the environmental burden of polymer composites, yet its heterogeneous structure creates competing effects on strength, moisture resistance, density, and process ability. This study developed an artificial intelligence-assisted framework for balanced composite formulation. Experimental data of agricultural biomass reinforced polymer composites were gathered, harmonized and validated using leakage controlled validation. The mechanical and physical properties were predicted by artificial neural networks and conventional regression models. Explainable analysis …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Bending and Single Edge Notch Bending Test (SENB) Investigation of Natural Fiber- Reinforced Epoxy Composites using Machine Learning
Abstract: The present study aims to determine the behavior of hemp fiber-reinforced epoxy composites in terms of bending behavior and fracture toughness under bending load resembles the substitutive behavior of existing synthetic composites. The fabrication was carried out by hand lay-up assembly of hemp fiber with Lapox-12 epoxy resin volume fraction of 60:40 fiber: matrix volume. Flexural testing revealed an average strength of 93.5 ± 2.8 MPa and SENB testing revealed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 59–69 Read article
-
Enhancing Mechanical Properties by Parameter Optimization in Fiber and Particle Reinforced Composites
Abstract: This research focuses on optimizing the mechanical and thermal properties of hybrid fiber and particle-reinforced composites through systematic parameter optimization using the Taguchi method and Grey Relational Analysis (GRA). Composites were fabricated using varying fiber volume fractions (20%, 30%, and 40%), particle sizes (20 μm, 60 μm, and 100 μm), and curing temperatures (60°C, 80°C, and 100°C) in a 3-factor, 3-level experimental design. Key properties such as tensile strength, impact …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 75–85 Read article
-
Experimental Evaluations of the Tensile and Impact Characteristics of Polypropylene Composites Reinforced with Hybrid Fibers
Abstract: In marine engineering design, polymeric composites reinforced with natural fibers are frequently used. Through hybridization, natural fiber plastic composites' mechanical properties can be improved. Assessing the performance of recycled newspaper fiber (rNF) and rNF/glass fiber (GF) hybrid polypropylene composites is the aim of the current experiment. Using maleic anhydride (MA) as a coupling agent, the effects of GF loading on the impact strength and tensile behavior of composite materials with …
Published in Emerging Trends in Chemical Engineering · Vol. 12, Issue 1, 2025 · pp. 30–39 Read article
-
Vibration Characteristics of Copper-Aluminium Composite under Different Boundary Conditions: Experiment and Simulation
Abstract: The utilization of vibration analysis on the tapered beam significantly enhances the engineering investigation and design process. It is notable that the width of the tapered beam exhibits variation along its length, while the height remains constant. Experimental modal testing aims to determine modal factors such as natural frequency, damping, and mode shapes. A comparative study is presented in this paper, examining the vibrational characteristics of tapered beams composed of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 190–203 Read article
-
An Optimize Formulation to Synthesis of size Controlled Hydrophobic Starch Acetate Nanoparticles using Box- Behnken Design
Abstract: The best way to improve the overall performance of native starch is by chemical modification. In recent years, hydrophobically modified starch has attracted considerable attention for the design and manufacture of novel nanoparticulate drug delivery carriers. The purpose of this research was to synthesize hydrophobic starch nanoparticles (NPs) and to optimize process factors through the use of response surface methodology (RSM). The corn starch acetate (CSA) NPs was synthesized using …
Published in Journal of Polymer & Composites Read article
-
Investigation of Mechanical Properties of Banana, Linen and Their Hybrid Reinforced Composite Laminates in Adverse Condition and Analyze Using ML
Abstract: This research investigates the mechanical performance of composite laminates reinforced with banana and linen fibers, focusing on both individual and hybrid fiber combinations. The primary objective is to assess how these natural fiber composites behave under extreme environmental conditions, particularly high humidity and fluctuating temperatures, which are common in aerospace and automotive applications.Key mechanical properties—tensile strength, flexural strength, and impact resistance—are experimentally evaluated to assess the performance and long-term reliability …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 25–31 Read article
-
Viscoelastic Behavior and Wrinkle Formation in Cotton- Polyester Garments: A Data-Driven Approach for Textile Care
Abstract: This study investigates the wrinkle behavior of cotton-polyester blended fabrics by analyzing data from over 1,200 store-handled garments. Integrating concepts from polymer chemistry and computer vision, it aims to establish a smart textile care framework based on fiber-specific wrinkle characteristics. The research identifies how cotton’s hydrophilic and non-elastic structure results in increased wrinkling, while polyester’s thermoplastic and crystalline properties enhance wrinkle resistance. Elastomeric fibers like Lycra contribute to wrinkle recovery …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 50–60 Read article
-
Machine Learning Based Optimization of Polymer Structure Property Relationships in Composite Material Systems
Abstract: In modern engineering applications, polymer-based composite materials have garnered a lot of attention because of their lightweight nature, high strength-to-weight ratio, and changing physical features. In order to maximize the relationships between polymer structure and properties in composite materials, this study suggests a strategy based on reinforcement learning (RL). The research utilized the Polymer Composite Properties Dataset, which contains 12,700 records associated with polymer matrices, reinforcement fillers, interfacial bonding characteristics, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 242–255 Read article
-
Mechanical Performance Assessment of Hybrid FRP Laminates with Carbon Fiber Core Using Experimental and Numerical Approaches
Abstract: The high strength-to-weight ratio, corrosion resistance and design flexibility of Fiber-reinforced polymer (FRP) composites have attracted considerable attention in aerospace, automotive and structural applications. This work presents an experimental and finite element study on the tensile and flexural behavior of epoxy-based hybrid FRP laminates. Five laminate configurations were manufactured, including a unidirectional carbon fiber laminate and four hybrid laminates, Kevlar–Carbon–Kevlar (K/C/K), Glass–Carbon–Glass (G/C/G), Kevlar–Carbon–Glass (K/C/G), and Glass–Carbon–Kevlar (G/C/K). For all …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Revolutionizing Form and Function: Exploring 4D Printing as a Novel Manufacturing Approach for Complex Generative Structures and Customized Formworks
Abstract: This research delves into the transformative potential of 4D printing manufacturing technology, focusing on its innovative application in fabricating intricate generative and computational structures for adaptable formwork in both individualized and mass-customized scenarios. Spanning the interdisciplinary realms of digital design, digital fabrication, and material science, the study comprehensively explores the integration of these diverse fields. Utilizing generative algorithms and parametric design tools, the research employs simulations to realize complex patterns …
Published in International Journal of Manufacturing and Production Engineering · Vol. 1, Issue 2, 2023 · pp. 41–50 Read article
-
Experimental Assessment and Statistical Argument of Al-Si/CSA/MoS2 Hybrid Composites for Mechanical and Tribological Characteristics
Abstract: To augment the mechanical and tribological properties of Al-Si matrix composites complement with molybdenum disulphide (MoS₂) and coconut shell ash (CSA), a mixed experimental and Face-Centered Composite (FCC)strategy was employed. A liquid metallurgical method called stir casting was used to create hybrid composites with 5–15 wt.% CSA and 1–3 wt.% MoS₂. A FCC experimental design with thirty runs was used to thoroughly evaluate the materials. This design allowed for the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 792–802 Read article
-
Predictive Modeling of Polymer Composites for Medical Implants Using Artificial Intelligence Techniques
Abstract: The use of polymers in biomaterials was now key to designing the next generation of medical implants, which need to be strong and also compatible with living tissue. Tests for biocompatibility, such as those done in the laboratory and by doing experiments on animals, require much time and many resources, so the need for computer-based approaches becomes clear. An artificial intelligence approach was provided in this study to determine how …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 665–692 Read article
-
Process Parameters Optimization of Fiber Laser Cladded SS316 Surface Using RSM Analysis
Abstract: This paper presents the laser cladding experiments on the surface of SS316 to study the variations in process parameters, such as scanning speed (100-250 mm/min), laser power (50-250 W), and % volume of B4C (5- 25%) + SS316 powder on the mechanical, metallurgical and tribological performance of the modified surface. A central composite design (CCD) was used to develop the response surface methodology (RSM) to design the experiments and for …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 186–201 Read article