Search
96 articles for “Scanning Electron Microscopic (SEM) results”
-
Experimental Investigation for Strengthening the Nanocomposite Cementitious Materials with a Nanoscale Modification
Abstract: For the last few decades, researchers have widely used nanopolymer to control the mechanical properties of cementitious materials as a micro reinforcement. This paper examines and compares the mechanical and microstructure property of nanofiber cementitious material. Twenty-four sets of beam/cube cast with carbon nanofibers (CNFs) cementitious material where CNFs were used from 0.1%, 0.2%, and 0.3% of cement weight. The nanoparticles were scattered using a surfactant and an ultrasonic probe …
Published in Recent Trends in Civil Engineering & Technology · Vol. 12, Issue 2, 2022 · pp. 10–24 Read article
-
Properties of ZnO Thin Film deposited on Flexible Substrate using RF Sputtering
Abstract: Semiconductor materials demand is increased in recent years, due to new emerging technologies. There is need to find the alternate for silicon in electronics industry, as silicon is brittle in nature and has low efficiency, which makes it unsuitable for transparent and flexible device. Zinc oxide (ZnO) is emerging as popular choice of researchers due to its wide range of properties, abundancy and non-toxicity. This work explores the properties of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 50–56 Read article
-
Investigation on Properties of Water and Methylene Chloride Blown Rigid Polyurethane Foam
Abstract: Physical properties are important parameters which influence the other properties and performance of rigid polyurethane foam (RPUF). Water and methylene chloride are the important ingredients of RPUF which act as blowing agents and influence the density, morphology and fire properties. RPUF samples were prepared from crude 4, 4’-diphenylmethane diisocyanate (CMDI), polyether polyol, triethylene diamine (TED), 1, 4-butane diol, polysiloxane ether, water and methylene chloride. RPUF with different densities were prepared …
Published in Journal of Polymer & Composites · Vol. 2, Issue 1, 2023 · pp. 46–54 Read article
-
The Patterns of Enamel Rod after Exposure to Probiotic Beverages
Abstract: Probiotic beverages have a taste of acid that is produced by fermentation of probiotic bacteria. The acid condition can affect the structure of tooth enamel. The structure of tooth enamel is formatted by enamel prism that is composed by hydroxyapatite (HA) crystals. According to several studies, HA has a critical pH <5.5 and can be changed in 180 min by acid. The objective of the study is to describe enamel …
Published in Research and Reviews: A Journal of Dentistry · Vol. 3, Issue 2, 2012 · pp. 28–36 Read article
-
Mechanical and Tribological Characterization of CaCO3 and CaSO4 Filled CSM-E-Glass Fiber Reinforced Vinyl Ester Composites
Abstract: AbstractIn this paper, mechanical and tribological behavior of the composites under dry sliding wear of vinyl ester matrix reinforced with chopped strand mat (CSM)-E-glass fiber and fillers CaSO4 and CaCO3 sliding against smooth stainless steel counterface (Ra = 0.07 µm) using Taguchi experimental design has been presented. The effects of sliding velocity (1.57, 2.62 and 3.67 m/s), normal load (20, 40 and 60 N), filler content (0, 10 and 20 …
Published in Journal of Polymer & Composites · Vol. 1, Issue 3, 2013 · pp. 13–31 Read article
-
Microstructural Evolution and Mechanical Performance of Ambient-Cured Fly Ash–Metakaolin Inorganic Polymer Composites Activated by Anhydrous Sodium Silicate Powder
Abstract: Inorganic geopolymer networks offer a low-carbon and sustainable solution to traditional binder systems through the alkali-activation of industrials-grade aluminosilicate material. The present paper focuses on the microstructure development and the mechanical performance of the ambient-cured fly ash – metakaolin inorganic polymer composite activated with solid anhydrous sodium silicate powder. Five inorganic polymer binder combinations were formulated by replacing fly ash with metakaolin at mass fractions of 0%, 10%, 20%, 30%, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Mechanical and Morphological Characterization of Halloysite Nanotube (HNT) Reinforced Urethane Dimethacrylate (UDMA) Dental Composites
Abstract: Dental resin composites are widely used in restorative dentistry because of their excellent aesthetics, conservative cavity preparation, and satisfactory mechanical properties. However, their long-term clinical performance is limited by polymerization shrinkage, wear, microcrack formation, water absorption, and degradation in the oral environment. This study investigates the mechanical and morphological characteristics of Halloysite Nanotube (HNT)-reinforced Urethane Dimethacrylate (UDMA) dental composites to enhance the structural performance and durability of restorative materials. UDMA-based …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Preparation and Characterization of Aluminium Doped ZnO Thin Films by Spin Coating Technique
Abstract: In this work, the preparation of Al-doped ZnO (AZO) thin films by the sol-gel spin-coating method is reported. The structural properties and surface morphologies of film prepared at RT were characterized by X-ray diffraction (XRD) and field emission scanning electron microscope (FE-SEM). The XRD and SEM results disclosed that the crystallization quality and grain size of as-prepared films were highly influenced by Al doping. Laser Raman Spectrometer results indicated that …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 2, 2020 · pp. 16–22 Read article
-
Electrospun Antibacterial Polymer Composite Scaffolds Incorporating Silver Nanoparticles for Enhanced Wound Healing
Abstract: The present study focuses on the synthesis and characterization of electrospun polycaprolactone (PCL)/chitosan nanofiber scaffolds incorporated with silver nanoparticles (AgNPs) to enhance antibacterial activity and biological performance. Uniform nanofibers with controlled morphology were fabricated using electrospinning, and different AgNP concentrations were introduced to investigate their influence on fiber structure, antimicrobial response, and cellular interactions. Scanning electron microscopy (SEM) revealed that increasing AgNP content resulted in well-distributed fibers with reduced diameters, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1025–1051 Read article
-
Design and Characterization of High-Performance Polymer Nanocomposites for Aerospace Applications
Abstract: Polymer nanocomposites have revolutionized aerospace materials through mechanical strength, thermal stability, and lightness. A number of polymer matrices filled with nanofillers such as carbon nanotubes, graphene, and nanoclay considerably improved structural integrity, flame resistance, and environmental adaptability. However, fabrication techniques are still being optimized so that nanofillers are properly dispersed throughout, which may create contradictions between mechanical strength and process ability. This work tries to design and characterize high- performance …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 178–193 Read article
-
A Study of Macrostructure and Wear Behavior of AL7075-B4C MMC Using DoE Method
Abstract: Metal matrix composites are advanced materials produced by combining two or more constituents. In that the major phase called matrix alloy and the other is, generally, ceramic reinforcement. AA7075- B4C Composites are popular in automotive, aerospace and defense fields because of their high strength-to-weight ratio, wear resistance, etc. Present work is focused on the study of wear behavior of Aluminum 7075 Alloy with B4C composites prepared by using Stir Casting …
Published in Trends in Mechanical Engineering & Technology · Vol. 9, Issue 2, 2019 · pp. 25–32 Read article
-
Development and Evaluation of a Novel Polyaniline/Polyvinyl Alcohol/Silver Nanocomposite for Antibacterial Applications: Synthesis and Characterization
Abstract: A novel nanocomposite made up of polyaniline, polyvinyl alcohol, and silver (PAL/PVA/Ag) was synthesized using the reduction of chemical technique in this study. Aniline was polymerized in situ with ammonium persulfate to create polyaniline (PAL), while Ag+ ions were employed to make an nanoparticle of Ag colloidal solution. The combination of Ag nanoparticles with the PAL/PVA composite resulted in the development of a new nanocomposite. Scanning electron microscopy (SEM) and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 39–47 Read article
-
Enhancing The Mechanical Performance of Al6061/Graphite Composites Reinforced with Sic and Aluminium Oxide Processed by Stir Casting
Abstract: The study investigates the mechanical properties of aluminum alloy Al6061 reinforced with varying proportions of silicon carbide (SiC) (0 wt%, 4 wt%, 5 wt%, and 6 wt%) and aluminum oxide (Al₂O₃) (0 wt%, 4 wt%, 3 wt%, and 2 wt%), with a constant addition of 1 wt% graphite. The composites were fabricated using the stir casting process, an efficient and economical method for uniformly distributing ceramic reinforcements within the metal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 66–74 Read article
-
Strength Studies of Fly Ash Stabilized with Lime and Gypsum
Abstract: An experimental study was conducted to investigate the performance of a composite derived from stabilizing fly ash with lime and gypsum. The initial part of the study examines the effect of lime (4%, 8%, and 12% by mass of dry fly ash) on compaction (in terms of density/moisture relationship) and unconfined compressive strength (UCS) of fly ash. Further the effect of adding small amount of gypsum (1%) on strength was …
Published in Journal of Geotechnical Engineering · Vol. 2, Issue 3, 2015 · pp. 10–16 Read article
-
To explore the effect of polyethylene glycol additive on mechanical and gas permeation properties of polyvinyl alcohol membranes
Abstract: Polyvinyl alcohol (PVA) membranes were prepared by solution casting and blended with Polyethylene glycol (PEG) in de-ionized water which led to the formation of porous and flexible membranes. Extensive experimentation were performed, in order to find out that at what composition of PEG pores will be generated in the PVA membranes. The PVA polymer is a hard and crystalline thermoplastic so high concentrations of PEG were used, i.e. 40 wt%, …
Published in Journal of Polymer & Composites · Vol. 7, Issue 1, 2019 · pp. 27–33 Read article
-
Microstructural and Mechanical characterization of Brass and Bronze alloys
Abstract: Brass, a copper and zinc alloy, is renowned for its malleability and resistance to corrosion, which makes it perfect for musical instruments and plumbing. Aluminium bronze, containing copper and aluminium, offers superior strength and wear resistance, commonly used in marine and industrial applications for its durability and corrosion resistance. This study aimed to compare the micro and macro structural characteristics of brass and aluminium bronze alloys. The microstructures of these …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 2, 2024 · pp. 28–37 Read article
-
Molebdate as Corrosion Inhibitor for Aluminium 356 In Acidic and Saline Media
Abstract: Corrosion processes are the cause of significant losses in industry. Organic, inorganic, and mixed material inhibitors have all been used to resist corrosion for a long time, but the environmental toxicity of organic corrosion inhibitors has driven a quest for inorganic corrosion inhibitors. The effect of molybdate as a new corrosion inhibitor on the corrosion of aluminium 356 in acidic and saline conditions was investigated using electrochemical and weight loss …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 1, 2022 · pp. 39–47 Read article
-
Fabrication and Optimization of Process Parameters for Friction Stir Welding AA7075+10%wt.SiC Composite by Taugchi Method
Abstract: Aluminium alloy 7075 as matrix and silicon carbide (SiC) as reinforcement has been widely used in aircrafts and space industries because of high strength to weight ratio. Fusion welding of this Aluminium Metal Matrix Composite (MMC) will lead to many problems such as porosity, micro-fissuring and hot cracking. However, friction stir welding (FSW) can be used to weld this MMC without above mentioned defects. Objective of this investigation are fabrication …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 3, 2018 · pp. 102–112 Read article
-
Fabrication and Surface Modified Non-woven Calotropis gigantea Fiber Mat Reinforced Polypropylene Composites by Film Stacking Method
Abstract: Nowadays, there is a growing environmental consciousness and awareness about the need for sustainable development, which has led to growing interest in using natural fibers as reinforcement in polymer composites for synthetic fiber substitution. The current work deals with the effects of Calotropis gigantea fiber (CGF) content and chemical modification of CGF mats by treatment with sodium dodecyl sulfate (SDS) and SDS-pretreated benzoyl chloride on the fundamental properties of CGF-filled …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 1, 2022 · pp. 10–22 Read article
-
Experimental investigation of thermally grown Indium film’s structural and tribological properties
Abstract: Indium thin film growth found numerous applications, such as cold welding of infrared detectors and readout-integrated circuits (ROIC) to form sensor chips. In film is grown on the Si substrate by thermal evaporation. The XRD results indicated the tetragonal bcc phase in the (101) preferential plane. Scanning electron microscopy (SEM) indicated an uniform, continuous film covering the whole surface. The EDS examination confirmed the pure In film. The atomic force …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 58–66 Read article