Search
25 articles for “Nitrogen oxides”
-
Experimental Investigation on Nitrogen Oxides Air Pollutant Reduction Characteristics of Cement Mortar Using Sustainable Photocatalytic Material
Abstract: Emissions of nitrogen oxide (NOx) should be diminished to address the facts of urban air pollution and its health and environmental consequences. This study explores the potential of NOx reduction of photovoltaic pollutants in cement mortar using titanium dioxide (TiO2) as a photovoltaic material. NOx is one of the major pollutants of urban air, related to the problems of smog and acid rain, with serious health hazards. The study focuses …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 · pp. 26–40 Read article
-
Dosing Control of Urea in Selective Catalytic Reduction (SCR) to enhance the reduction of Nitrogen oxides
Abstract: Selective Catalytic Reduction (SCR) is an effective aftertreatment technique designed to comply with rigorous emission criteria established by global regulatory authorities for the elimination of nitrogen oxides from exhaust streams. Since NOx and ammonia reagents are poisonous and an excess of either is therefore very undesired, it poses an intriguing control problem, particularly at high conversion. SCR systems must reduce NOx emissions as much as possible and reduce the possibility …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 110–120 Read article
-
The State of Air Quality: Pollution Sources, Health Implications, and Future
Abstract: Air quality is a critical component of environmental health, significantly affecting human well-being and ecological balance. Poor air quality has been related to a variety of health issues, including respiratory and cardiovascular disorders, and it is a major cause of early death worldwide. Understanding the origins, kinds, and impacts of air pollutants is critical for establishing effective pollution-reduction initiatives. This review focuses on the principal pollutants that affect air quality, …
Published in International Journal of Atmosphere · Vol. 1, Issue 2, 2024 · pp. 1–4 Read article
-
Study the Impact of Corrosive Pollutants on Building Materials Corrosion
Abstract: Reinforced concrete structures (RCS) may be made more resistant to corrosion by using fiber reinforced polymers (FRP). One of the primary concerns with reinforced concrete constructions is corrosion. It causes disintegration in building material components by interactions with salts, acids, and alkalis. Both within and outside of reinforced properties, pollutants and effluents accelerate disbanding. When bio-waste and building materials come into contact, microorganisms and macro organisms, grow and emit acid …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 20–29 Read article
-
Degradation of Building Materials by Corrosive Pollutants
Abstract: Fiber reinforced polymers (FRP) is used for the corrosion suppression of reinforced concrete structures (RCS). One of the main issues with reinforced concrete constructions is corrosion. It interacts with acids, alkalis and salts to produce disintegration in building materials components. Pollutants and effluents speed up disbanding inside and outside reinforced structures. Bio-wastes come in contact of building materials to develop miro and macro-organism and these organisms release acid substances to …
Published in International Journal of Minerals · Vol. 2, Issue 1, 2025 · pp. 15–24 Read article
-
Injection Pressure Optimization for Non-edible Biodiesel Blends in CRDI Engines: A Comparative Study
Abstract: The growing demand for clean and sustainable energy has increased interest in biodiesel produced from non-edible oil sources. These fuels are renewable, biodegradable, and do not compete with food resources. However, the effective use of biodiesel blends in modern diesel engines requires proper control of fuel injection parameters, particularly injection pressure. In common rail direct injection (CRDI) engines, injection pressure strongly influences spray formation, air–fuel mixing, combustion behaviour, and exhaust …
Published in International Journal of Manufacturing and Production Engineering · Vol. 3, Issue 2, 2025 · pp. 24–34 Read article
-
Sources and Health Effects of Arsenic, Fluoride, and Nitrate in Water
Abstract: Arsenic, fluoride, and nitrate are major inorganic contaminants in water that pose significant risks to human health. These contaminants are introduced into water sources through both natural geological processes and human activities. Arsenic is primarily released from arsenic-bearing minerals through weathering, dissolution, and erosion, while human activities such as agriculture, mining, and fossil fuel combustion further enhance its presence in water. Fluoride contamination mainly results from the dissolution of fluoride-bearing …
Published in Journal of Water Resource Engineering and Management · Vol. 13, Issue 2, 2026 · pp. 19–25 Read article
-
Understanding the Role of Remote Sensing Techniques in Monitoring Air Quality for Effective Adherence to Environmental Impact Assessment Practices in Nigeria
Abstract: The paper reviews the Nigerian Environmental Impact Assessment (EIA) Act, outlining the established air quality thresholds and emission caps for stationary sources. The standard applies to; common pollutants like sulphur dioxide, carbon monoxide, ozone, particulate matter and nitrogen oxides; toxic metals such as arsenic, nickel, cadmium and mercury; as well as volatile organic compounds, ammonia, antimony, zinc, formaldehyde and radon.It also describes the major classifications of remote sensing applications, including …
Published in International Journal of Satellite Remote Sensing · Vol. 4, Issue 2, 2026 Read article
-
Bioethanol and Beyond: A Comprehensive Review on Sustainable Biofuels for Global Energy Demands and Environmental Conservation
Abstract: This comprehensive review explores the concept of "biofuels," specifically focusing on energy-enriched chemicals generated through biological processes or derived from the biomass of living organisms, including microalgae, plants, and bacteria. As the global population continues to increase, there is a growing demand for more energy supplies to enhance the quality of life. Biofuels, harnessed from various sources such as sugar, starch, and organic waste, have emerged as potential solutions to …
Published in Recent Trends in Infectious Diseases · Vol. 1, Issue 2, 2024 · pp. 1–9 Read article
-
Evaluation of the Emission and Engine Operability of Biodiesel and Biodiesel Blends Produced from Alkali-Catalyzed Esterification and Transesterification of Jatropha Oil Feedstock
Abstract: This study reports on the engine performance analysis of biodiesel and blends produced from jatropha-based bio-oil feedstock via combined esterification and transesterification process, the physiochemical of the bio-oil, and subsequent biodiesel produced. Jatropha bio-oil was characterized to determine its fuel properties. A liquid phase transesterification reaction at 60 min reaction time, 50°C temperature, using a methanol-oil molar ratio of 40:1 and 0.35 g of sodium hydroxide (NaOH) catalyst was carried …
Published in Journal of Petroleum Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 9–21 Read article
-
Integrating Atmospheric Science: Understanding Greenhouse Gases, Aerosols, and Air Quality Dynamics
Abstract: Atmospheric science investigates the Earth’s atmospheric systems to understand their composition, dynamics, and the implications for climate, weather, and air quality. This review explores five primary areas within the field: atmospheric composition, atmospheric modeling, remote sensing, air pollution, and boundary layer dynamics, highlighting critical challenges and advancements. Rising levels of greenhouse gases (GHGs), including carbon dioxide and methane, continue to drive global warming, while feedback mechanisms—like cloud interactions and surface …
Published in International Journal of Atmosphere · Vol. 1, Issue 1, 2024 · pp. 32–35 Read article
-
Thermal Analysis of Kirloskar VCR Engines Using Blended Biodiesels under Varying Loads
Abstract: The increasing demand for sustainable energy has prompted much research into environment-friendly substitutes for traditional fossil fuels. In this study, the thermal performance and emission characteristics of Kirloskar Variable Compression Ratio (VCR) diesel engines evaluated with varying load conditions using biodiesel-sourced oil blended with soybean oil are discussed. B0 (pure diesel) to B100 (pure biodiesel) blends were considered for the study to assess their effects on parameters, like brake thermal …
Published in International Journal of Electrical and Communication Engineering Technology · Vol. 3, Issue 1, 2025 · pp. 19–34 Read article
-
Development of a Low-Cost Air Quality Monitoring System Using the MQ2 Sensor
Abstract: Air pollution is becoming a major environmental problem, especially in cities, due to the quick expansion of industry and the rise in car emissions. The air is contaminated with dangerous chemicals such as carbon monoxide, nitrogen oxides, and fine particles, which have a major negative influence on human health by raising the risk of heart and respiratory diseases. Because of their dense populations and heavy traffic, urban areas are particularly …
Published in Recent Trends in Sensor Research & Technology · Vol. 12, Issue 2, 2025 · pp. 9–15 Read article
-
Development of Eco-friendly Glass Fiber Composites Embedded with Paddy Stubble for Sustainable Applications and Its Metallurgical Characterization
Abstract: The extreme rise in environmental challenges owing to agricultural activities, among which paddy stubble burning remains a huge concern. Burning about 15 million tons of paddy stubble leads to emissions discharge of various toxic pollutants and gases notably, nitrogen oxides, methane and carbon monoxide in large scale causing global air pollution and climate change. The study focuses on obtaining and preparing a paddy stubble powder and using it with glass …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 640–648 Read article
-
Evaluation of CI Engine Performance and Emissions Using WB10CNT90: A CNT-Reinforced Biodiesel Blend Approach and its Marketing Prospects for sustainable fuel Commercialization
Abstract: The experimental and analytical evaluation of the WB10CNT90 blend—a combination of 10% waste biodiesel derived from Madhuca longifolia, 90% conventional diesel, and 100 ppm Multi-Walled Carbon Nanotubes (MWCNTs)—demonstrates its potential as an efficient and eco-friendly alternative to conventional diesel. The Brake Thermal Efficiency (BTE) of the engine increased by approximately 15%, indicating enhanced energy conversion efficiency during combustion. Simultaneously, the Brake Specific Fuel Consumption (BSFC) showed a reduction of nearly …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 741–759 Read article
-
Structure–Property–Performance Characteristics of Chlorella Vulgaris Lipid-Based Bio-Composites Modified with n-Pentanol
Abstract: The depletion of fossil fuel resources and increasingly stringent emission regulations have intensified the need for sustainable alternatives for compression ignition (CI) engines. Biodiesel derived from Chlorella vulgaris microalgae is a renewable, non-edible fuel; however, its higher viscosity and lower volatility can adversely affect engine performance. To address these limitations, higher alcohols such as n-pentanol can be employed as effective modifiers to improve fuel physicochemical properties while maintaining compatibility with …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1636–1648 Read article
-
Influence of Nanomaterial on Biofuel Extracted from Lemon Seed Feedstock
Abstract: Biodiesel, which is a type of biofuel, offers a replacement to the traditional diesel fuel currently available on the market, which is derived from petroleum that is both more sustainable for the environment and more attractive from an economic standpoint. A plethora of environmental benefits can be obtained through the utilization of this technology, including a reduction in emissions of greenhouse gases and particulate matter, as well as the possibility …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 200–210 Read article
-
Innovative Thin Film Technologies for Energy and Environmental Applications
Abstract: This article explores recent advancements in thin film technologies, focusing on their applications in photocatalysis, energy storage, and gas sensing. It highlights the growth of zinc oxide (ZnO) films via thermal evaporation for photocatalytic dye degradation, achieving up to 99.6% efficiency at pH 2. The study also examines vanadium pentoxide (V2O5) as a promising cathode material for lithium-ion batteries, discussing its structural characteristics and challenges related to conductivity and stability. …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 3, 2024 · pp. 33–38 Read article
-
Modeling of ZnO Based Nano Sensor Device for Evaluating Electronic Interaction with NO2 Pollutant: Combining Multiphysics Simulation and DFT Study
Abstract: This study focuses on the designing and modeling of a sensor device employing zinc oxide (ZnO) nanowires (NWs), and the evaluation of the chemical response of the same in the presence of nitrogen dioxide (NO2), which is an acute harmful pollutant for human health and environment. Experimentally synthesized ZnO nanostructures were used as the basis for modeling of the ZnO NWs based sensor device along with a single ZnO NW, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 211–219 Read article
-
MAP: The Invisible Shield Protecting Our Product's Journey
Abstract: Modified Atmosphere Packaging (MAP) has established itself as one of the most reliable and widely adopted preservation technologies in the modern food industry, offering a practical means of extending shelf life while maintaining the sensory and nutritional integrity of food products throughout storage and distribution. The fundamental working principle revolves around deliberately altering the gaseous composition within sealed packages, primarily through the strategic use of carbon dioxide, nitrogen and oxygen …
Published in Research & Reviews : Journal of Food Science & Technology · Vol. 15, Issue 2, 2026 · pp. 52–58 Read article