Search
47 articles for “Nano-fluid”
-
Rheological behaviour analysis of prepared nano-cutting fluids from Al2O3 and TiO2
Abstract: In this research paper, an attempt has been made to characterize and analyse the rheological properties of two samples of nano-cutting fluids. Nanoparticles of Al2O3 and TiO2 were characterized by SEM and EDS. The high peaks showed the respective presence of aluminium, oxygen for alumina and titanium and oxygen for titanium dioxide. The two samples of nano-cutting fluids were prepared. Alpha alumina, α-Al2O3 nanoparticles were used for the preparation of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 329–338 Read article
-
A review on the Enhancing Heat Exchanger Efficiency with CuO/Water Nanofluid in a Shell and Helical Coil System
Abstract: Over the years, there has been a lot of focus on improving heat transmission by utilizing various approaches in an effort to make heat exchangers smaller and less expensive. The following methods have been found to be the most successful in increasing heat transfer rate in heat exchangers: Nano-Fluids, first (3) Rubbing heat exchanger surfaces rough. (2) Inserting fluid tabulators. However, a combination of all three approaches or any two …
Published in Trends in Mechanical Engineering & Technology Read article
-
Double slope Solar Still by using Nano Embedded Binary Eutectic PCM: A Review
Abstract: Solar distillation is an economical and eco-friendly technique. Concerns about the increasing need for clean drinking water for home and commercial uses are spreading around the world. In rural and tiny settlements with limited access to water and electricity, solar water distillation is a viable method for removing salty water from drinking water. The efficiency and performance of thermal energy storage materials based on phase change materials (PCM) and nanofluids …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 29–33 Read article
-
A comprehensive study of Zn x Fe 2-x O 3 Nanoparticles for magnetic fluid hyperthermia
Abstract: Magnetic nanoparticles are the bottlenecks of nanomedicine. They are a wide area of study in nanotechnology. In this review, the role of nanotechnology in transforming ZnxFe2-xO3 nanoparticles into biomedical applications and smart healthcare systems is demystified. The synthesis and characterization of ZnxFe2-xO3 nanoparticles are scrutinized, with a focus on the advantages of hydrothermal methods and the revealing capabilities of high-resolution electron microscopy, which enable a deeper understanding of these nanoparticles' …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 2, 2024 · pp. 1–9 Read article
-
A Comprehensive Study of ZnxFe2-xO3 Nanoparticles: Assessing Magnetic Properties for Medical Imaging (MI)
Abstract: Diluted magnetic ZnxFe2-xO3 nanoparticles are special semiconducting nanoparticles which are recognized for their magnetic properties. A theoretical examination of Zn-doped αFe2O3 nanostructures reveals a range of structural and property variations, offering insights into their potential applications and behavior at the nanoscale. In this regard, Heisenberg’s model and Weiss molecular filed theory is used to describe the magnetic properties of ZnxFe2-xO3 nanoparticles. These theorems inevitably enable to investigate the relationship between …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 26, Issue 2, 2024 · pp. 18–25 Read article
-
Significance of Nanoparticles in Phase Change Materials as Heat Transfer Fluid for Solar Heat Absorption
Abstract: The utilization of solar energy as a sustainable and eco-friendly power source has gained significant traction in recent years, with innovations constantly evolving to improve efficiency and effectiveness.one such innovation lies in the integration of nanoparticles into phase change materials (PCMs) to enhance their heat transfer capabilities, making them ideal candidates for solar heat absorption applications. This paper delves into the significance of nanoparticles in PCMs as heat transfer fluids …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 57–65 Read article
-
Comparative Analysis of Polymer-Enhanced and Conventional Magnetorheological Fluids in E-Bicycle Semi-Active Suspension
Abstract: In light of the increased use of electric bicycles as a sustainable transport means, various mechanical challenges emerge which were absent in traditional bicycles, primarily concerning vibration isolation and riding comfort. Indeed, hub motors, batteries and the entire drivetrain system produce dynamic excitations which passive suspension cannot handle effectively. This paper presents a comparison of conventional magnetorheological (MR) fluid and the polymer-based MR nanocomposite fluid within the context of semi-active …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Investigation of Forced Convection Heat Transfer Efficiency Using Cuo/Water Nanofluid in A Concentric Tube Heat Exchanger with Helical Coiled Insert
Abstract: An apparatus that uses nanofluid to transport heat is called a heat exchanger. This uses a nanofluid as the working fluid. One can make nanofluid hanging nanoparticles in liquids such as petroleum products, water, oil, ethylene glycol, fluorocarbons, etc. Forced convection heat transfer using CuO/water as a Nanofluid and distilled water as the base fluid has been examined in a concentric tube heat exchanger with helical coiled insert. Tests on …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 2, 2024 · pp. 27–41 Read article
-
Improved Cooling Effectiveness in Radiators and Heat Exchangers with Nanofluid-Based Technology
Abstract: This study discusses how the process of heat transfer in radiators and heat exchangers can be improved using nanofluids and analysis of computational fluid dynamics. These nanofluids comprise Al₂O₃ and ZnO dispersed in water-based ethylene glycol solutions, and graphene oxide dispersed in water-based solutions, and performance evaluation was done for the range of flow rates 180–420 l/h. And a 3D CAD model was created using the ANSYS Workbench. It was …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 1, 2025 · pp. 31–62 Read article
-
Semiconductor Physics and Micron Scale Fluid Mechanics towards the Microelectromechanical Systems Associated with Nanotechnology
Abstract: Interrelations among semiconductor physics, microfluidics, nanofluidics and nanotechnology are briefly described. A single microchannel bend is designed and fabricated by author using the maskless lithography, hot embossing lithography and direct bonding. Dyed water is the selected and prepared working liquid in this work. Surface-driven (passive) capillary flow of working liquid is recorded in the fabricated microchannel bend using a CMOS camera. This work may be useful in applied chemistry.
Published in Research & Reviews : Journal of Physics Read article
-
Numerical Investigation of Heat Transfer Enhancement in Micro-Channel Cooling Using Finite Element Analysis
Abstract: Due to the enormous heat fluxes emitted by modern electronic chips, there is a persistent need to enhance the efficiency of cooling systems. This study's focus is on optimizing heat transfer in micro-channel heat sinks that use liquid cooling. Geometric changes and the use of nano-fluids as coolants in place of water are performed to achieve this goal with little energy consumption. Numerical analysis of pipe micro-channel fluid flow and …
Published in International Journal of Energy and Thermal Applications · Vol. 1, Issue 1, 2023 · pp. 36–44 Read article
-
Modelling and Interpretation of A Novel Battery-Motor amalgamated Thermal Management System using rGO/CO3O4 based Hybrid Nano-composite Coolant for Electric Vehicle Applications
Abstract: Battery and motor have to be given equivalent importance to maintain the lifetime, thermal characteristics, efficiency and safety of Electric Vehicles (EVs). Thermal management of EVs need to be considered for battery and motor because of dynamic loading conditions. This research proposes a novel Battery-Motor Integrated Thermal Management System (BMITMS) for EV applications. An EV assembled with LiFePO4 battery pack and a three-phase induction motor has been considered on this …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 225–243 Read article
-
Experimental Investigation on Heat Transfer Enhancement in Shell and Tube Heat Exchanger Using Graphene Nanofluids
Abstract: The paper focuses on the dispersion of Graphene nanoparticles in a water–ethylene glycol based fluid to investigate their impact on the convective heat transfer performance of the resulting nanofluid. Various concentrations of graphene nanoparticles were prepared, and the nanofluids were subjected to different ultrasonication durations to ensure proper dispersion and stability of the nanoparticles within the base fluid. The study involved extensive experimental evaluation to systematically analyze how the nanoparticle …
Published in Journal of Automobile Engineering and Applications · Vol. 12, Issue 3, 2025 · pp. 32–38 Read article
-
Heat Transfer Performance of ZnO- Ethylene Glycol- Water Nanofluid Using Thermal Lens Technique
Abstract: Nanofluids are engineered fluids used in advanced electronic systems for thermal management. Fluids with dispersed nanoparticles have exhibited remarkable thermal properties. Ethylene glycol (EG) and water mixtures are widely used in many industrial areas. This study investigates the synthesis and heat transfer performance of ZnO-EG, ZnO-water, and ZnO-EG-water nanofluids using a dual-beam thermal lens technique. ZnO is a widely used inorganic, UV-absorbing, multifunctional semiconducting material with applications in various fields …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 440–445 Read article
-
Nanofluids: Advanced Synthesis Methods, Innovative Applications, and Future Directions
Abstract: Nanofluids, a novel mixture of nanoparticles and base fluids, is an innovative blend that has appeared as a transformative advancement in heat transfer and thermal management technologies. This study is going to discuss advanced synthesis methods, properties, and extensive applications of nanofluids in various fields, such as biomedical engineering, electronics cooling, solar energy, and machining. Optimization techniques such as nanoparticle selection, concentration control, and computational fluid dynamics modelling are also …
Published in Journal of Nuclear Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 1–11 Read article
-
Design and Analysis of Quality Improvement for Radiator Manufacturing Industry
Abstract: This study investigates the design and analysis of quality control measures for the radiator manufacturing industry through the utilization of various nanofluids. Both experimental techniques and computational fluid dynamics (CFD) simulations using ANSYS software are employed to assess the performance of different nanofluids in enhancing the efficiency and reliability of radiators. The experimental aspect involves testing the heat transfer characteristics and thermal conductivity of nanofluids, while CFD simulations provide insights …
Published in International Journal of Energy and Thermal Applications · Vol. 2, Issue 2, 2024 · pp. 24–28 Read article
-
CFD Analysis of Six-Flow Microchannel Heat Sink Using the Different Nanofluid
Abstract: In this study, we compare the heat-conveying capabilities of ordinary water with those of cooling fluids such as Ag-Water, TiO2-water, and Al2O3-water nanofluid at a volume percentage of 0.50%, and we also examine the six flow micro-channels of the fin-equipped heat sink. Hardware like microprocessors and integrated circuits are not used in the comparison. To evaluate the effectiveness of different cooling fluids, a number of thermal metrics are used, such …
Published in Journal of Polymer & Composites · Vol. 11, Issue 11, 2023 · pp. 1–11 Read article
-
Enhancing the Performance of Evacuated Tube Heat Pipe Solar Collector Using CuO Nanofluid
Abstract: Renewable energy is an important component of sustainable development technologies that meet current demands without risking future generations' ability to meet their own. Due to fast expanding energy consumption and environmental concerns, many international scholars are seeking an alternate approach to fulfill future energy demand. Due to its abundance and pure nature, solar energy appears to be the most enticing option in this case. Because of their ease of use, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 393–407 Read article
-
Studying the Effectiveness of Solar Thermal Collectors Using Nanofluid
Abstract: Energy plays a crucial role in the technological growth that humanity is now experiencing. However, new avenues for energy generation and consumption have also been made possible by this advancement in science and technology. Another major factor driving up energy needs is an increase in population density. Carbon footprints are being left on the environment by fossil fuels, which are running out more quickly. Dependence on renewable energy sources, which …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 3, 2025 · pp. 35–41 Read article
-
An Experimental Investigation on the Determination of Critical Micelle Concentration (CMC) Of Various Surfactants Using the Surface Tension Method
Abstract: This study primarily focuses on the experimental investigation for determining the critical micelle concentration (CMC) of various surfactants that are commonly employed to enhance the stability of nanoparticles in base fluids. In this context, three surfactants belonging to the anionic category—Sodium Dodecyl Sulfate (SDS), Sodium Lauryl Sulfate (SLS), and the bio-surfactant Rhamnolipid—were selected, along with one non-ionic polymer, Polyvinylpyrrolidone (PVP), which is used as a surfactant. The CMC of each …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 145–153 Read article