Search
64 articles for “ANOVA-Analysis of variance”
-
Operational Modeling of Cutting Parameters Influence on Power Consumption and Surface Roughness in CNC Turning of AISI 304
Abstract: This paper describes the power consumption and surface roughness predictive model development in computer numerical control (CNC) turning of AISI 304 austenitic stainless steel using Taguchi method and response surface method (RSM). The experiments are designed and conducted based on Taguchi’s design of experiments (DoE) with cutting speed, feed rate, depth of cut and nose radius as the process parameters. Signal-to-noise (S/N) ratios of responses are calculated to identify the …
Published in Journal of Production Research & Management · Vol. 3, Issue 1, 2013 · pp. 8–15 Read article
-
Effect of Cryogenic Treatment on Wear Characteristics of T42 High Speed Steel
Abstract: In this study cryogenic treatment is performed on AISI T42 HSS material and its wear characteristics are studied. Test of treated and untreated samples is taken on pin on disc wear testing machine at different loads and RPMs. The wear of the sample is measured. The wear resistance of the samples is also measured by weight loss method. The results are tabulated. An experimental effort to evaluate tool wear improvement …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 2, 2016 · pp. 70–79 Read article
-
Assessment of Loneliness and Depression Status of Tuberculosis Patients Who Applied to Sakarya Tuberculosis Control Dispensary
Abstract: Background: This study was planned by using a descriptive and cross-sectional research model in order to examine the loneliness and depression status of tuberculosis patients who applied to Sakarya Tuberculosis Control Dispensary. Materials and Methods: The study was carried out with 100 tuberculosis patients who applied to Sakarya Tuberculosis Control Dispensary between September 2016 and February 2017, after obtaining institutional permission and ethics committee approval. Analysis of data collected using …
Published in Journal of Nursing Science & Practice · Vol. 10, Issue 1, 2020 · pp. 1–7 Read article
-
Investigation of Areca Stem and Banana Stem fibre Hybrid Composites for Improved Strength and Sustainable Applications
Abstract: Research on natural fibre reinforced polymer composites as eco-friendly substitutes for traditional synthetic composites has intensified due to growing need for sustainable engineering materials. This work used the Taguchi L9 orthogonal array to experimentally examine and optimize the mechanical behaviour of hybrid epoxy composites reinforced with areca and banana fibres. The impacts of epoxy matrix composition, areca and banana fibre content on the composite’s tensile strength, impact strength, flexural strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Comparative Evaluation of the Effect of Adhesive Restorative Techniques on the Reinforcement of Simulated Immature Permanent Teeth: An in Vitro Study
Abstract: The aim of the study was to compare the reinforcement effect of 3 different adhesive restorative techniques on simulated immature maxillary central incisors after apexification. A total of 30 simulated immature permanent maxillary central incisors were randomly assigned into 3 groups (n=10), according to the reinforcing technique used: Group 1: Nanohybrid composite. (Tetric N-Ceram Ivoclar Vivadent), Group 2: Short-fiber reinforced composite (everX posterior GC EUROPE) extended 3mm below CEJ, covered …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 69–75 Read article
-
Optimizing Fusion Zone Grain Size, Hardness and Tensile Strength of Micro Plasma Arc Welded Titanium (Ti-6Al-4V) Alloy Using Grey Relational Analysis
Abstract: In the present work, Titanium (Ti-6Al-4V) alloy sheet of 0.5 mm thick is butt welded using Micro Plasma Arc Welding. Welding input parameters like peak current, base current, pulse rate and pulse width are considered and output responses like fusion zone grain size, hardness and ultimate tensile strength of the welded joint are considered. Taguchi L25 orthogonal matrix is adopted by considering four factors and five levels of weld input …
Published in Journal of Mechatronics and Automation · Vol. 5, Issue 2, 2018 · pp. 21–33 Read article
-
Optimization of Process Parameter in Electrical Discharge Machining
Abstract: This is the non-traditional machining process. The high surface finish of the material is required. More complex shape of material is required. Wire EDM is one of the nontraditional machining processes. Surface roughness and kerf width are of crucial in the field of machining processes. This paper uses the Grey relational theory and Taguchi optimization technique, in order to optimize the cutting parameters in Wire EDM for D3 steel material …
Published in Journal of Experimental & Applied Mechanics · Vol. 11, Issue 2, 2020 · pp. 4–10 Read article
-
Analysis of Surface Roughness and Material Removal Rate in Engine Valve Turning Operation of Material SUH3
Abstract: The purpose of this paper is to present an experimental work attempting to optimize the influencingprocess parameters involved in dry machining of the exhaust engine valve of material martensiticstainless steel grade SUH3. Looking at available literature it is observed that a lot of work can be donein the field dry machining related to surface integrity but no work can be reported on investigationimplementation of dry machining in engine valve manufacturing …
Published in Journal of Automobile Engineering and Applications · Vol. 8, Issue 1, 2021 · pp. 17–22 Read article
-
Machining-Induced Surface Integrity Optimization of High-Carbon Alloy Steel for Enhanced Polymer–Metal Composite Interface Performance
Abstract: The functional performance and structural reliability of polymer–metal hybrid composites are strongly influenced by the surface integrity of metallic substrates used for interfacial bonding and load transfer. In this context, machining-induced surface characteristics play a critical role in determining adhesion behavior, dimensional stability, and mechanical compatibility within composite architectures. The present study investigates the hard turning performance of a newly developed high-carbon alloy steel intended for composite-integrated structural applications, with …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1531–1546 Read article
-
Optimization of Multiple Performance Characteristics Using Desirability Function Analysis (DFA)
Abstract: In present days the manufacturers are facing many challenges in setting of optimal process parameters while machining in order to achieve multiple performance characteristics. The present work is to investigate the effect of the drilling process parameters on the multiple responses of Volume of material removal rate (VMRR) and surface roughness (Ra). The experiments were carried out on AA6082 material using taguchi’s L16 Orthogonal array with carbide twisted drills. The …
Published in Journal of Production Research & Management · Vol. 8, Issue 2, 2018 · pp. 23–29 Read article
-
A Review on Parametric Optimization of WEDM Technique for OHNS Steel
Abstract: In this study, the Wire Electrical Discharge Machining (WEDM) process for OHNS (Oil Hardened Non-Shrinking) steel, a high-performance material frequently used in the production of dies, punches, and precision tooling components, is optimized parametrically and validated experimentally. A continuously moving wire electrode and a sequence of electrical discharges are used in WEDM, a non-traditional machining method, to erode material and produce intricate and precise profiles, particularly in materials that are …
Published in Trends in Mechanical Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 29–35 Read article
-
Multi Objective Optimization in Turning Parameters of Al 6463 using Principal Component Analysis
Abstract: AbstractIn multi objective optimization, weight criterion of each objective is important for producing better and accurate solutions. Now a day, due to the growing requirement of the higher precision apparatus for its useful aspect, machining time (MT) and material removal rate (MRR) of a machined part plays a significant role in the modern manufacturing process. This study focuses on optimizing CNC turning parameters on Al 6463 based on principal component …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 2, 2017 · pp. 6–15 Read article
-
Optimization of Machining Parameters for End Milling of 1018 Mild Steel using Taguchi based Grey Relational Analysis
Abstract: The present work investigate the parametric optimization of end milling operation for 1018 mild steel with multiresponse criteria based on Taguchi approach with the Grey relational Analysis. Taguchi’s L9 orthogonal array which takes nine experimental runs was used to execute the design matrix of machining parameters. Cutting speed (CS), Feed (FD), Cutter RPM and Depth of cut (DOC) are optimized with the consideration of multiple performance characteristics namely Machining time …
Published in Journal of Mechatronics and Automation · Vol. 3, Issue 2, 2016 · pp. 36–47 Read article
-
Optimization of turning process parameters for Titanium grade 5 using Taguchi method
Abstract: In the contemporary world, the standard of the surface end is most significant demand for several turned work piece due to that maker's square measure seeking to stay competitive in the market. Taguchi parameter style is a powerful tool and efficient methodology for optimizing quality and performance output of the producing method. This paper investigates the parameters poignant the surface roughness manufacture in turning method for material Titanium Grade 5. …
Published in Journal of Experimental & Applied Mechanics · Vol. 10, Issue 2, 2019 · pp. 17–22 Read article
-
Parametric Study of Twin Screw Extrusion for Processing Epoxy/Carbon Black Nanocomposites Using Orthogonal Array Technique
Abstract: AbstractThis paper presents the experimental investigation of the influence of process parameters of twin screw extrusion on the dispersion and electrical, thermal and mechanical properties of epoxy/CB nanocomposites. Four factors, namely, loading level of carbon black (0, 2, 4, 6, 8 and 10 wt%) in epoxy, screw speed (75, 100 and 125 rpm), temperature (5 °, 15 ° and 30 °C) and number of passes (5, 10 and 15) were …
Published in Journal of Polymer & Composites · Vol. 1, Issue 2, 2013 · pp. 15–26 Read article
-
Utilization of Jackfruit as a Potential Supplement in Yoghurt and Evaluation of Its Nutritional and Commercial Aspects
Abstract: This study aimed to formulate fruit juice yoghurt by incorporating nutritious and flavorful jackfruit juice, known for its health benefits. Jackfruit juice was added at different levels (5%, 10%, and 15%) to yoghurt, and various chemical, microbiological, bioactive compounds, and sensory quality characteristics were analyzed. Statistical analysis revealed that panelist acceptability decreased with increasing fruit juice level. Among the samples, yoghurt with 10% jackfruit juice showed significantly different sensory characteristics …
Published in Research and Reviews : Journal of Dairy Science and Technology · Vol. 14, Issue 1, 2025 · pp. 1–14 Read article
-
An Approach on Optimization of Thermo Physical Properties of Teak Wood Dust Filled Polymeric Composites
Abstract: The aim of the present work was to prepare the specimens with the help of hand-lay-up technique to measure the thermal properties of TWDPC. The density & voids of TWDPC were measured to determine its physical property & significantly affected some of its mechanical properties. Taguchi experimental method was applied to optimize its thermal properties. The optimal factor combinations were determined with the help of ANOM & the analysis of …
Published in Journal of Polymer & Composites Read article
-
The Influence of Fresh Raffia Palm Trunk on the Bioremediation of Oil-Based Drill
Abstract: This study determines the effect of fresh raffia palm for biodegradation of oil-based drill cuttings bioremediation. The experiment was conducted at the rivers institute of Agricultural research and training (RIART) located at the Rivers State University, Port Harcourt. Samples of oil-based drill cuttings were bulked in eleven reactors with four replications (T1, T2, T3-T11). The physiochemical properties of the initial drill cuttings were analyzed. Also, the physiochemical properties of the …
Published in International Journal of Pollution: Prevention & Control · Vol. 1, Issue 2, 2023 · pp. 41–48 Read article
-
Performance Evaluation of Eco-friendly Cutting Fluid in Machining Process—An Approach towards Environmentally Friendly Production
Abstract: The machining industry's evolving environmental consciousness has prompted a growing demand for cutting fluids devoid of chlorine and sulphur, thus fostering sustainable machining practices. This surge in demand is driven by mounting apprehensions over environmental contamination and worker safety. As the industry transitions to modern cutting fluids, it becomes imperative to comprehend their effectiveness and the optimal machine parameters required for their deployment in the turning process. In our current …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 149–160 Read article
-
Monitoring and Modeling of Atmospheric Change Indices In Parts of Imo State Using GIS, MATLAB and ANN
Abstract: Geographic Information System (GIS) and Matrix Laboratory (MATLAB) Models were used to study air quality in parts of Imo State. Primary data were obtained by conducting relevant analysis using standard instrumental methods on open-air rainwater samples collected in the dry and the rainy seasons for two consecutive years. GIS showed that the pollutants were present throughout the year. Artificial Neural Network (ANN) of MATLAB 2015 was used to represent data …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 15, Issue 1, 2024 · pp. 25–74 Read article