Search
81 articles for “ANOVA PROCESS”
-
Optimization Process of Stick Arc Welding Parameter in Taguchi Method
Abstract: The stick welding, one of the most basic manufacturing component or assembly process or common factor affecting a fabrication, economical high productivity and small industrial welding or quality of lower cast welding parameter. This research paper deals with machinery system, an optimum data like welding parameter, compare the arc input by Taguchi method in basic material of milled steel rod and different grade size material. For experimental output data a …
Published in Trends in Machine design · Vol. 6, Issue 2, 2019 · pp. 22–28 Read article
-
Determination of the optimum conditions for salt bath ferritic Nitrocarburizing process of AISI 1018 Steel using ANOVA method.
Abstract: Industrial modern machinery components such as gears, bolts and shafts are always subjected to continuous frictional wear. From decades' surface treatments are performed to enhance the tribological properties of these components, however use of toxic cyanide salts in the techniques like Nitrocarburizing is a threat to environment. Therefore, another non-toxic surface modification process Sursulf Nitrocarburizing is investigated on AISI 1018 low carbon steel and results were analyzed and optimized using …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 1, 2018 · pp. 1–7 Read article
-
Analysis of Injection Moulding Process Parameters on PVC Material via Taguchi-ANOVA
Abstract: This paper deals with the development of prediction model for injection moulding machine using Taguchi. In this work, all the process parameters namely filling time (FT), refill time (RFT), tonnage time (TT) and ejector retraction time (ERT) are modeled using Taguchi method. PVC (polyvinylchloride) taken as process material in this experimental work under optimal working conditions. The influence of filling time (FT), refill time (RFT), tonnage time (TT) and ejector …
Published in Journal of Experimental & Applied Mechanics · Vol. 6, Issue 2, 2015 · pp. 13–21 Read article
-
Effect of Process Parameters on Material Removal Rate of Wire-Cut EDM of AISI EN 31 Tool Steel
Abstract: This paper is an attempt to find the effect of input process parameters on the material removal rate of WEDM of AISI EN 31 tool steel. The parameters taken for this study were pulse on time, pulse off time, peak current. The other process parameters like wire tension, servo voltage, wire feed rate, and spark gap voltage are kept constant. The experiment was designed using Taguchi’s L18 orthogonal array. The …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 2, 2017 · pp. 35–41 Read article
-
Optimization of Performance Characteristics of Rail Wheel Profiling using Taguchi with ANOVA
Abstract: Optimization is the process or technique to approach the best output goal, which is necessary, that the production of the industries at the best quality in minimum total input cost and maximize the profit. So there are many optimization methods, one of them is Taguchi method. The outline of the paper, the optimization approach based on Taguchi method, which is to optimize the cutting parameter in under grounded CNC Turning …
Published in Trends in Transport Engineering and Applications · Vol. 2, Issue 1, 2015 · pp. 25–38 Read article
-
A Review on Parametric Optimization of WEDM Technique for OHNS Steel
Abstract: In this study, the Wire Electrical Discharge Machining (WEDM) process for OHNS (Oil Hardened Non-Shrinking) steel, a high-performance material frequently used in the production of dies, punches, and precision tooling components, is optimized parametrically and validated experimentally. A continuously moving wire electrode and a sequence of electrical discharges are used in WEDM, a non-traditional machining method, to erode material and produce intricate and precise profiles, particularly in materials that are …
Published in Trends in Mechanical Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 29–35 Read article
-
Multi Objective Optimization in Turning Parameters of Al 6463 using Principal Component Analysis
Abstract: AbstractIn multi objective optimization, weight criterion of each objective is important for producing better and accurate solutions. Now a day, due to the growing requirement of the higher precision apparatus for its useful aspect, machining time (MT) and material removal rate (MRR) of a machined part plays a significant role in the modern manufacturing process. This study focuses on optimizing CNC turning parameters on Al 6463 based on principal component …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 2, 2017 · pp. 6–15 Read article
-
Investigations on Effect of Cutting Forces and Surface Finish in Plain Milling Using Box Behnken Design
Abstract: Nowadays research over improvement of machining process as a part of it cutting forces and surface finish on mechanical elements has become quite significant in the operational and aesthetical point of view. To enhance accuracy and precision, manufacturing firms are adopting automated systems in order to achieve manufacturing excellence. In the present work, the effect of various process parameters like spindle speed, feed, and depth of cut on the cutting …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 1, 2016 · pp. 17–30 Read article
-
Investigation of Areca Stem and Banana Stem fibre Hybrid Composites for Improved Strength and Sustainable Applications
Abstract: Research on natural fibre reinforced polymer composites as eco-friendly substitutes for traditional synthetic composites has intensified due to growing need for sustainable engineering materials. This work used the Taguchi L9 orthogonal array to experimentally examine and optimize the mechanical behaviour of hybrid epoxy composites reinforced with areca and banana fibres. The impacts of epoxy matrix composition, areca and banana fibre content on the composite’s tensile strength, impact strength, flexural strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Investigating the Influence of Process Parameters on Photochemical Machining of Phosphor Bronze Alloy Microchannels
Abstract: Microchannels are widely employed in microfluidic devices, biomedical systems, and compact heat exchangers, where their functional efficiency depends strongly on surface finish, dimensional control, and edge quality. Traditional machining techniques often face limitations in producing such features with the required precision, prompting the use of advanced micromachining methods. In the present work, photochemical machining (PCM) has been applied to fabricate serpentine-shaped microchannels in phosphor bronze. The study systematically investigates the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 837–846 Read article
-
Optimization of Multiple Performance Characteristics Using Desirability Function Analysis (DFA)
Abstract: In present days the manufacturers are facing many challenges in setting of optimal process parameters while machining in order to achieve multiple performance characteristics. The present work is to investigate the effect of the drilling process parameters on the multiple responses of Volume of material removal rate (VMRR) and surface roughness (Ra). The experiments were carried out on AA6082 material using taguchi’s L16 Orthogonal array with carbide twisted drills. The …
Published in Journal of Production Research & Management · Vol. 8, Issue 2, 2018 · pp. 23–29 Read article
-
Optimizing Milling Parameters in Face Milling Operation
Abstract: In statistics, response surface methodology (RSM) establish a relationship between several self or system explanatory variables and one or more response variables. Since many variables are involved to control the process, the requirement of some mathematical models to represent the process is found to be necessary. In order to extract the result by this statistical analysis, the experimental results will have to be processed using the analysis of variance (ANOVA). …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 3, 2018 · pp. 60–76 Read article
-
Experimental Investigation of Flexural Strength and Impact Strength of Friction Stir Welded Ultrahigh Molecular Weight Polyethylene (UHMWPE)
Abstract: Friction stir welding (FSW) is a solid-state process in joining thermoplastic materials. Polymers are engineering materials used for future technological development as the polymer processing and fabrication techniques have developed plastic products and components in major industries. Utilization of ultrahigh molecular weight polyethylene (UHMWPE) material in engineering structures has increased because of its low weight, high specific strength, chemical resistance, design flexibility, corrosion resistance and reduced manufacturing costs. In present …
Published in Journal of Mechatronics and Automation · Vol. 2, Issue 3, 2015 · pp. 8–15 Read article
-
Optimization of Process Parameters by Using CNC Milling Machining on EN-5 Steel
Abstract: This paper is to optimize process parameters to minimize the surface roughness and maximize the material removal rate by using CNC milling machine. In this research work due to wide applications and economy of EN-5 mild steel, it is used as a work piece material for machining and the process parameters studied were spindle speed, feed rate and depth of cut. Taguchi L 9 orthogonal had been used with three …
Published in Journal of Materials & Metallurgical Engineering · Vol. 5, Issue 3, 2015 · pp. 1–6 Read article
-
AN EXPERIMENTAL INVESTIGATION ON SURFACE ROUGHNESS OF LASER BEAM MACHINING OF ALUMINIUM ALLOY
Abstract: Laser beam machining (LBM) is a cutting-edge technique widely utilized for precision machining of advanced materials. This experimental investigation focuses on the surface roughness of aluminum alloy (Al 6061) during LBM. The study systematically examines the impact of process parameters such as laser power, cutting speed, and gas pressure on surface roughness (Ra). The significance of surface roughness in determining the quality and functionality of machined components is emphasized. The …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 82–104 Read article
-
Mechanical and Tribological Characterization of CaCO3 and CaSO4 Filled CSM-E-Glass Fiber Reinforced Vinyl Ester Composites
Abstract: AbstractIn this paper, mechanical and tribological behavior of the composites under dry sliding wear of vinyl ester matrix reinforced with chopped strand mat (CSM)-E-glass fiber and fillers CaSO4 and CaCO3 sliding against smooth stainless steel counterface (Ra = 0.07 µm) using Taguchi experimental design has been presented. The effects of sliding velocity (1.57, 2.62 and 3.67 m/s), normal load (20, 40 and 60 N), filler content (0, 10 and 20 …
Published in Journal of Polymer & Composites · Vol. 1, Issue 3, 2013 · pp. 13–31 Read article
-
Operational Modeling of Cutting Parameters Influence on Power Consumption and Surface Roughness in CNC Turning of AISI 304
Abstract: This paper describes the power consumption and surface roughness predictive model development in computer numerical control (CNC) turning of AISI 304 austenitic stainless steel using Taguchi method and response surface method (RSM). The experiments are designed and conducted based on Taguchi’s design of experiments (DoE) with cutting speed, feed rate, depth of cut and nose radius as the process parameters. Signal-to-noise (S/N) ratios of responses are calculated to identify the …
Published in Journal of Production Research & Management · Vol. 3, Issue 1, 2013 · pp. 8–15 Read article
-
STUDY ON EFFECT OF END MILLING PARAMETERS ON CUTTING FORCES USING RESPONSE SURFACE METHOD
Abstract: Now a day’s research over improvement of surface roughness on mechanical elements has become quite significant in the operational and aesthetical point of view. To enhance accuracy and precision, manufacturing firms are adopting automated systems in order to achieve manufacturing excellence. In the present work the effect of various process parameters like spindle speed, feed and cutting fluid composition on cutting forces in End milling process is investigated by using …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 2, 2018 · pp. 62–72 Read article
-
Optimization of Machining Parameters for End Milling of 1018 Mild Steel using Taguchi based Grey Relational Analysis
Abstract: The present work investigate the parametric optimization of end milling operation for 1018 mild steel with multiresponse criteria based on Taguchi approach with the Grey relational Analysis. Taguchi’s L9 orthogonal array which takes nine experimental runs was used to execute the design matrix of machining parameters. Cutting speed (CS), Feed (FD), Cutter RPM and Depth of cut (DOC) are optimized with the consideration of multiple performance characteristics namely Machining time …
Published in Journal of Mechatronics and Automation · Vol. 3, Issue 2, 2016 · pp. 36–47 Read article
-
Production of Injection Moulded Natural Fiber Reinforced Hybrid Composites and Assessment of Hybridization’s Effect on Mechanical Properties
Abstract: Over the past two decades, rising environmental awareness, public concern over waste, and stricter government regulations have encouraged companies to reduce their reliance on petroleum-based fuels and products. Consequently, there is a clear need to find sustainable, eco-friendly substitutes for the materials currently in use. This shift has renewed attention on renewable resources and sparked wider interest in advanced composites and green materials research. With this in mind, the present …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 246–271 Read article