All articles
1475 articles
-
Multi-Layer Aluminum–Polymer Hybrid Structures for Improved Automotive Impact Performance
Abstract: Layered metal–polymer hybrid laminates have emerged as promising candidates for lightweight automotive structures requiring high impact resistance and structural reliability. In this study, aluminum/glass–epoxy hybrid laminates were fabricated using a symmetric stacking sequence through hot compression molding to evaluate their mechanical and energy absorption performance. Density analysis revealed an average measured density of 2.34 g/cm³, closely matching the theoretical value of 2.36 g/cm³, with a deviation of approximately 1.02%, indicating …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 42–53 Read article
-
Eco-Sustainable Walnut–Hemp Reinforced Composites for Automotive Brake Applications
Abstract: The search for natural fiber-reinforced composites that can be used instead of manmade materials has been sparked by the growing need for eco-friendly materials in car brake systems. The study looks at three types of Walnut–Hemp Reinforced Friction Composites (WFRCs): WFRC-1, which is 10% walnut and 20% hemp; WFRC-2, which is 15% walnut and 15% hemp; and WFRC-3, which is 20% walnut and 10% hemp. Aspects like tensile strength, compressive …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 439–448 Read article
-
Structure–Optical Property Correlation of Co-Doped TiO₂ and ZnO Nanofillers for Advanced Functional Composite Applications
Abstract: This study investigates the enhancement of the structural and optical properties of titanium dioxide (TiO₂) and zinc oxide (ZnO) nanoparticles through cobalt (Co) doping. Pristine TiO₂ and ZnO are widely studied metal oxides; however, their large band gaps and limited visible-light absorption restrict their performance in optoelectronic, photocatalytic, and environmental applications. Co doping is employed as an effective strategy to overcome these limitations by inducing band-gap narrowing, creating defect-related electronic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1374–1394 Read article
-
Synthesis of Graphene-CeO2 Nanocomposite with Enhanced Electrochemical Properties
Abstract: For the fabrication of graphene–cerium oxide (CeO₂G) composites, 99 mg of cerium oxide (CeO₂, 99.9%) was uniformly dispersed in 100 mL of deionized water via ultra-sonication (40 kHz) to achieve a stable suspension, followed by the incorporation of 1 mg of synthesized graphene. The resulting mixture was maintained at ambient temperature (25 ± 2 °C) under continuous magnetic stirring at 500 rpm for 2 h to promote effective interfacial interaction …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1355–1373 Read article
-
Optimizing Parameters for Dry Sliding Wear Control in Stir-Cast AA7050/SiC Composites
Abstract: Using a pin-on-disc tribometer, this study examined the dry sliding wear behavior of AA7050/SiC composites. The production of this metal matrix composite was achieved through the stir-casting process, which involved an initial step of melting the AA7050 alloy, followed by the careful introduction of silicon carbide (SiC) particles, stirring to achieve uniform dispersion, and finally, casting the molten mixture. Wear rate (WR) was determined by three operational parameters: SiC reinforcement …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1624–1635 Read article
-
Synthesis, Characterization and Dielectric Properties of Polymer Materials for Microwave Communication Applications
Abstract: The rapid advancement in wireless communication technologies has necessitated the development of advanced materials with tailored dielectric properties. Polymer materials, because of their flexibility, lightweight nature, and processing ease, are currently being used in initiatives to formulate low-dielectric materials specifically tailored for microwave communication applications. In the current investigation, the authors concentrate on the synthesis, characterization, and dielectric properties of five distinct novel polymer materials. The synthesized polymers are characterized …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1482–1495 Read article
-
Experimental Investigation of Water Absorption and Mechanical Behavior of Bamboo Fiber Based Polymer Composites
Abstract: The objective of this research is to assess the suitability of bamboo fibers as a sustainable alternative to synthetic and wood fibers for reinforcing polymer composites. Plant-based fibers, particularly bamboo, offer advantages such as biodegradability, lightweight nature, abundance, and impressive mechanical properties that rival or surpass those of conventional materials. In this study, special focus is placed on the extraction of long fibers from Dendrocalamus giganteus, using a combined mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1471–1481 Read article
-
Energetic and Exergetic Investigation on Vapor Compression Refrigeration System Using Ag₂O-R134a Nanofluid as Refrigerant
Abstract: This paper experimentally explored energetic and exergetic performance investigation of VCR System using Ag₂O-R134a Nanofluid as Refrigerant. The integration of silver oxide (Ag₂O) nanoparticles within polymer and composite materials offers promising avenues for enhancing the thermal and physical properties of advanced systems. The energetic and exergetic performance study of VCR were investigated with test parameters including compressor power consumption, cooling capacity, coefficient of performance (COP), discharge temperature, irreversibility in the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 279–287 Read article
-
Investigating The Influence of Sic Reinforcement on The Mechanical and Tribological Properties of PA12 Polymer Composites in SLS
Abstract: The study investigates the mechanical and tribological performance of neat PA12 polymer and SiC-reinforced PA12 polymer composites made via Selective Laser Sintering (SLS). To evaluate just how reinforcement has influence upon overall performance, we incorporated into the PA12 polymer matrix a constant amount of 5 wt.% of Silicon Carbide (SiC). Mechanical testing focused on both tensile and fatigue behavior and testers conducted it with a Servo-Hydraulic Multipurpose High-Capacity Fatigue Test …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 541–554 Read article
-
Power and Area - Aware Recursive Multiplier Architecture Utilizing Polymer Composites for Neural Network Acceleration
Abstract: Approximate computing is widely applied in error - tolerant systems as an effective technique to enhance circuit performance by deliberately allowing occasional inaccuracies instead of strictly ensuring precise results for every computation. Among the fundamental building blocks of digital systems, multipliers play a crucial role in signal processing, control systems, and machine learning applications; however, they demand significant power, silicon area, and timing resources. Leveraging error - tolerant approximate multipliers …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1320–1337 Read article
-
Development of Chemi-resistive Polymeric Sensors for Innovations in Smart Buildings Interfacing with AI Systems
Abstract: The Elevator efficiency has become a critical concern in modern buildings, where frequent, unnecessary stops are a major inconvenience for tenants and contribute to significant energy consumption. Traditional elevator systems often halt on every floor, even when not required, leading to inefficiencies that are particularly costly in high-rise buildings. This paper proposes a smart elevator system using Artificial Intelligence (AI) and image processing to address these issues. By intelligently analyzing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1426–1438 Read article
-
Dielectric Polymer Based Tunable Bandpass Filter for RF MEMS Applications
Abstract: In this paper, we report on the design, modeling, and analysis of a tunable bandpass filter implemented in a coplanar waveguide (CPW) configuration, where a distributed MEMS transmission line (DMTL) is integrated with dielectric polymer layers to achieve dynamic frequency and bandwidth reconfigurability. The proposed filter architecture leverages the tunable dielectric response of polymer films, enabling precise control of the center frequency and passband width under applied electrostatic bias. Comprehensive …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1449–1470 Read article
-
Development of Polymer Based SRAM Cell with Enhance Low Power Performance
Abstract: Low-power memory technologies are in high demand with the rapid growth of portable electronics and energy-efficient computing systems. Static random-access memory (SRAM) plays a crucial role in processors, cache memories, and system-on-chip applications due to their speed and reliability. Static Random Access Memory (SRAM) is typically implemented using complementary MOS (CMOS) technology, which integrates both PMOS (P-channel Metal–Oxide–Semiconductor) and NMOS (N-channel Metal–Oxide–Semiconductor) transistors. However, as technology scales to deep submicron …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1439–1448 Read article
-
Effect of Ply Orientation on Thermal Erosion and Conductivity of Silica Phenolic Composites Under Oxy-Acetylene Flame
Abstract: The thermal and erosion performance of fiber-reinforced composites is highly sensitive to fiber architecture, matrix chemistry, and processing techniques, factors that have shaped development of advanced thermal protection systems (TPS) over past two decades. Silica phenolic (SP) composites, in particular, are widely employed in aerospace and defense applications due to their flame resistance, char stability, and ability to withstand severe thermal shock. However, optimizing thermal conductivity while improving erosion resistance …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 273–283 Read article
-
Mechanical and Thermal Performance of PETG Composites Reinforced with Short Carbon Fibers via Fused Filament Fabrication
Abstract: The study investigates the fabrication and characterization of polyethylene terephthalate glycol (PETG) composites reinforced with short carbon fibers (CF) using the fused filament fabrication (FFF) technique. Composite filaments with varying CF weight fractions (0, 5, 10, 15, and 20 wt%) were produced and evaluated for their mechanical, thermal, and morphological performance. The influence of CF reinforcement on tensile, flexural, and impact behavior was systematically examined, alongside thermal stability metrics including …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1219–1238 Read article
-
Analyzing the Performance and the Emission Characteristics of Palladium Catalyst using different blends of Methanol Fuel and Nano Particles of Aluminium and Titanium Oxides
Abstract: The high cost and limited availability of precious metals prompted the automotive industry to explore alternative materials for improving catalytic converter performance. This research focuses on the development and optimization of catalytic converters designed to reduce exhaust emissions, ensuring compliance with market needs and regulatory standards. Specifically, it investigates the three-way catalytic converter in a four-stroke engine utilizing commonly available noble metals, particularly palladium as the catalyst. The best way …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1505–1517 Read article
-
Leveraging Industrial Waste for Green Sustainable Nanobiopolymer Synthesis: Polymer, Environmental, Legal and Global Arbitration Perspectives
Abstract: Nanobiopolymers can be synthesized from industrial waste using innovative methods, marking a forward-looking and ecologically sound step in production methods address to his Home State Industrial waste has been used conventionally either through incineration, landfilling or stabilization. It results in large environmental risks, including air, water and soil pollution and often involves costly stabilization and disposal. With the help of polymer and composite substance recovering value means life for current …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 705–711 Read article
-
Structure-Property-Process Relationships in BNNS-Modified PEEK Nanocomposites for High-Performance Applications
Abstract: This study reports the design and performance evaluation of boron nitride nanosheet (BNNS)-reinforced polyetheretherketone (PEEK) nanocomposites fabricated using melt compounding and high-temperature Fused Filament Fabrication (FFF). PEEK, a high-performance thermoplastic, was reinforced with BNNS at 0.5–5wt.% to enhance mechanical, thermal, and tribological functionalities for advanced engineering use. Composite filaments were extruded and printed using a modified Bambu Lab FFF printer. Mechanical testing revealed a peak tensile strength of 108 MPa …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 867–888 Read article
-
Tailoring The Electrochemical Interface of Graphene–Gd₂O₃ Nanocomposites for Advanced Energy Storage
Abstract: Graphene–Gd₂O₃ nanocomposites were synthesized by incorporating varying concentrations of reduced graphene oxide (rGO) into Gd₂O₃ using a straightforward room-temperature solution method. The composites were analyzed using various distinct characterization techniques, including X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). Electrochemical measurements, particularly cyclic voltammetry (CV), demonstrated that the incorporation of graphene significantly enhanced the electrochemical performance …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 369–388 Read article
-
Critical Review on Photocatalytic Polymer Nanocomposites for Indoor Air Purification in Hotels
Abstract: The indoor air quality has become a key measure of health, comfort, and customer satisfaction of a hospitality setting. The challenges that continually affect hotels especially because of volatile organic compounds (VOCs), particulate matter, and microbial pollutants that are present in cleaning agents, furnishing, and human activity. In this regard, the photocatalytic polymer nanocomposites are one of the sustainable and efficient means of purifying indoor air. These materials combine photocatalysts …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 527–541 Read article