All articles
1751 articles
-
Axial Compression Behavior of Aluminum (Al), Glass/Epoxy (GFRP) and Hybrid Al-GFRP Crash-box: An Experimental and Digital Image Correlation Approach
Abstract: The study aims to understand the axial compression characteristics and fracture of cylindrical Aluminum (Al), Glass/epoxy (GFRP) composite and Hybrid Al-GFRP crash-boxes. The hollow Al tubes are fabricated by rolling and bonding a thin aluminum sheet followed by rivet joints. The GFRP samples are manufactured using the wet-hand layup technique followed by the vacuum bagging method. Hybrid samples are manufactured by covering GFRP tubes with aluminum sheets on the outer …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 304–313 Read article
-
Experimental Investigation of Hardness of FSW Al 5083 Alloy for Naval and Marine Application
Abstract: Friction stir welding (FSW) is a relatively novel method of solid-state joining. This connecting method is adaptable, environmentally benign, and low-energy. The present study focuses on hardness testing on welded butt joints, introducing the Friction Stir Welding procedure on aluminium alloys Al 5083, which are known for their remarkable performance in severe conditions. It is widely used in naval and marine applications due to its excellent resistance to seawater damage. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 227–236 Read article
-
Evaluation of microstructure properties and characterization of fracture locus of AA5083 through equal channel angular pressing techniques
Abstract: In this investigation, a commercially available aluminium alloy called AA5083 was subjected to two passes of equal channel angular pressing utilising a route B_C at room temperature for this experiment. To evaluate the effect of AA5083, the microstructure, mechanical attributes, and wear parameters of the alloy were examined both prior to and subsequent to undergoing this technique. Using an optical microscope, microstructural investigations were performed on the pressed alloy's flow …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 270–286 Read article
-
Deformation Behaviour of the Billet and Tooling Design on AA5083 through Equal Channel Angular Pressing With Effect of Back Pressure
Abstract: Equal channel angular pressing is an emerging method applied to subject materials to significant plastic strains while maintaining the original shape of the billet. Researchers have discovered that the level of strain attained through equal channel angular pressing is influenced by factors such as the angle of die, friction conditions, and the implementation of back pressure. These variables significantly impact the microstructure and the irregularity of strain within the billet …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 287–303 Read article
-
Exploring Polymer Substrates for CBSIW Antennas: Paper and Denim for Enhanced Gain and Bandwidth
Abstract: This paper presents a novel approach to antenna design by leveraging the unique properties of paper and Denim materials, both of which are polymers. This research underscores the potential of unconventional polymer materials like paper and jeans in antenna design, offering new avenues for the development of lightweight, flexible, and cost-effective communication devices for diverse wireless applications. The study focuses on the design and analysis of non-conventional substrate-based Circular Backed …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 64–80 Read article
-
A Review of Recent Advancements in the Field of Friction Stir Welding of Dissimilar Joints Made of Aluminium and Magnesium
Abstract: Friction stir welding (FSW) stands at the forefront of welding technology, offering a promising avenue for joining dissimilar metals like aluminum and magnesium. These metals, renowned for their exceptional properties such as ductility, thermal conductivity, low density, and impressive weight-to-strength ratios, find wide utility across numerous industrial sectors. However, traditional fusion welding methods often struggle to effectively join aluminum and magnesium due to their disparate physical and chemical characteristics. FSW …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 134–142 Read article
-
Impact of Tool rotating speeds on the Mechanical characteristics of dissimilar friction stir-welded AZ80A-Mg – AA6061-Al joints
Abstract: In this investigation, separate AA6061-Al and AZ80A-Mg alloy plates were effectively joined through stir welding with friction. We looked closely at the weld joints' characteristics, especially their mechanical aspects. In the experiment, here were multiple tool rotating rates (rpm) of 800, 1000, 1200, 1400, and 1600 used. A cylindrical pin-equipped tool featuring a tapered profile was utilized, inserted into the AA6061 alloy plate is offset by 0.5 mm, while maintaining …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 161–168 Read article
-
Advancements in graphene reinforced metal matrix composites: A comprehensive review
Abstract: The Present pollution norms insist automobile manufacturers to make use of ultra-high specific strength materials i.e., materials ahead of conventional metal matrix composites (MMCs) with micro-sized reinforcements. With the advent of nanomaterials, nanocomposites are being developed with properties that overcome the limitations for metals or composites with micro-sized reinforcements. In recent years, the family of graphene-based materials, in particular, graphene nanoplatelets (GNPs) reinforced MMCs offering promising solutions to revolutionize the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 177–189 Read article
-
Service Life Prediction of Concretes Incorporated with Ground Granulated Blast Furnace Slag and Icrete with respect to Chloride Ion Penetration
Abstract: The reduced service life of concrete structures in coastal or de-icing salt conditions is commonly attributed to corrosion generated by chloride. Therefore, extensive research is being conducted to estimate the time taken for threshold chloride ions to reach the reinforcement and break the protective layer, initiating the corrosive process. This study conducted an experimental investigation on controlled concrete, concrete incorporating 50% GGBS, and concrete incorporating both 50% GGBS and 2% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 214–226 Read article
-
Service Life Prediction of Concretes Incorporated with Fly Ash and Alccofine with respect to Chloride Ion Penetration
Abstract: Chloride-induced corrosion poses a significant threat to the degradation of reinforced concrete structures, especially in extreme environments such as marine and industrial exposure conditions, where the damage can be particularly severe. This study provides an experimental investigation utilizing three distinct water-binder ratios (0.3, 0.4, and 0.5) applied to three types of concrete mixtures: conventional concrete, concrete blended with 40% fly ash, and concrete blended with 40% fly ash and 2% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 202–213 Read article
-
Comparative Analysis of Dip and Spray Techniques with Ethanol, Polyvinyl Alcohol, and Acetone Hydrophobic Glass Slides with Al2O3 Coating
Abstract: The hydrophobic effects of Al₂O₃ coatings on glass slides are investigated in this work by comparing dip and spray procedures using three distinct solvents: acetone, polyvinyl alcohol (PVA), and ethanol. Using both dip and spray techniques, the experimental design systematically applies Al₂O₃ coatings on glass slides. Then, the effect of the chosen solvents on hydrophobicity is investigated. Delineating the complex interaction between coating processes and solvent options requires careful analysis …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 45–51 Read article
-
Experimental Study on Replacement of Cement and Fine Aggregate with Marble Dust and Copper Slag
Abstract: With the ever-growing challenge of managing escalating waste materials globally, this paper explores sustainable solutions in construction through the utilization of marble dust and copper slag. The rapid generation of waste poses severe environmental and health threats, necessitating innovative strategies for responsible waste management. Local availability and the potential to enhance concrete strength make marble dust and copper slag attractive candidates for the partial replacement of cement and fine aggregate. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 169–176 Read article
-
Assessing the Permeability of Bentonite with Sand, Marble Dust, and Fly Ash mixture with and without Effect of Permeate Solution for the Development of Efficient and Cost-Effective Landfill Liner for Sustainable Waste Management and Environmental Preservation
Abstract: This exploration paper researches the capability of further developing landfill liner materials by integrating varying percentages of bentonite into sand, marble dust, and fly ash mixtures. The study focuses on determining whether these mixtures are suitable for development of landfill liner by examining their permeability properties. Bentonite, a clay known for its high swelling and sealing properties, is added to sand, marble dust, and fly ash at different range from …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 1–11 Read article
-
Experimental Study on Waste Fibers in Concrete
Abstract: The rising expense of building, along with the progressive impact on the environment, has driven experts to adopt natural fibers such as coir and bamboo fibers and synthetic fibers such as plastic fibers for boosting concrete strength. Fibers are readily available at the test location, making them comparatively suitable as a reinforcing material in concrete. Concrete with fibers was compared to conventional concrete, and different strength parameters such as bending, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 190–201 Read article
-
Using FEA Simulation and Photoelasticity Techniques to observe Integrated Stress Pattern for Transparent Polycarbonate Rectangular Specimen having Arc Feature
Abstract: In the fields of mechanics and materials science, photoelasticity is a reliable experimental method that provides a visual evaluation and analysis of the distribution of stress in materials that are transparent or translucent. This non-destructive testing technique uses the special property of materials known as birefringence, or double refraction, to visualise stress on a model under load. The process involves building a physical model that mimics real-world structures, applying mechanical …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 55–63 Read article
-
Analysis of Thermo-Mechanical Properties in Cement Mortar Using Synthesized Silicate Microencapsulation of Phase Change Materials by Sol-Gel Process
Abstract: This investigation delves into improving building thermal comfort using microencapsulated phase change materials (PCM@SiO2) in cement mortar. The encapsulation process, achieved via a sol-gel method, envelops PCM in a silicate shell Differential Scanning Calorimetry (DSC) and Fourier-Transform Infrared Spectroscopy (FTIR) were used to confirm the thermal properties and integrity of encapsulated PCM, which showed an encapsulation efficiency of 92.7% and a thermal storage capacity of 99.7%. The study involved the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 152–160 Read article
-
Mechanical Characteristics of Naturally Woven Coconut Sheath/Short Sisal Fiber Reinforced Polymer Hybrid Composites
Abstract: This study presents the outcomes of an experimental investigation focusing on the tensile, flexural, impact and water absorption properties of unsaturated polyester resin reinforced with naturally woven coconut sheath and short sisal fibers. Sisal fiber, characterized by its abundance, affordability, degradability, and robust strength, serves as a compelling reinforcement. The naturally woven coconut sheath fibers, discreetly found in the hidden sections of coconut branches, offer an inexpensive, biodegradable option with …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 34–44 Read article
-
Structural Analysis of Heavy Vehicle Chassis Using Various Geometries and Materials
Abstract: The present research investigates the significance of the automobile chassis as a crucial section of a vehicle that provides a framework for the body and other parts to rest on. It highlights the need for the chassis to have sufficient bending stiffness for the best handling qualities, as well as enough rigidity to withstand shocks, twists, vibrations, and other loads. The draft and designing model for all the sections (I, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 9–33 Read article
-
Dynamic deformation and microstructural characteristics of AA5083 under the influence of electrochemical behaviour using equal channel angular pressing
Abstract: Large-scale Equal channel angular pressing is a great engineering material that has more potential for AA5083 industrial applications. Uniaxial dynamic compressive tests across a temperature of 448 K were conducted for the ECAP technique AA5083 in order to create such a design framework. The microstructure was described using transmission electron microscopy and scanning electron microscope both before and after dynamic loading. The plastic flow behaviour of the AA5083 was described …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 95–112 Read article
-
Implementation of Light Weight Carbon Composite Driveshaft for a Light Commercial Vehicle
Abstract: The automotive drive shaft is a crucial component for power and torque transmission in vehicles, with a tubular shape that spins due to engine power. The current drive shaft is made of heavy-duty mild steel, increasing the vehicle's weight and fuel consumption. To reduce the weight, a composite material called carbon fiber was used. Carbon fiber showed better performance in driveshaft operation, and its properties were evaluated using universal testing …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 52–65 Read article