All articles
1751 articles
-
Comparative Analysis of using Rubber isolator and Friction isolator in G+8 Building by SAP 2000
Abstract: Base isolation technique has become most popular that improves resistant quality during a seismic earthquake. These bases seclude moves under high pressure and they soak up an earth tremor smash by minimizing oscillating and trembling of ground. Adaptive base solitude system includes the separation system is Lead Rubber Bearing, Friction Isolators, channel Method, Laminated Rubber Bearing. Base separation is the broadly accepted seismic protected skeleton employed in any edifice in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 479–487 Read article
-
Aerodynamic Influences on Structures with Varied Plan Configurations
Abstract: The wind-induced effects on tall buildings demonstrate a level of unpredictability, attributed to the intricate influence of the building's plan shape on the distribution of wind loads. The oscillations experienced by tall structures, both longitudinally and laterally, are influenced by factors such as wind direction, building configuration, height, and structural characteristics. This investigation is centred around examining the impact of wind on tall buildings featuring diverse plan cross-sectional shapes. The …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 377–388 Read article
-
Experimental Investigation of OPC Concrete with Incorporation of Glass Powder as Partial Substituent Material.
Abstract: This study presents an experimental survey aimed at evaluating the viability of incorporating glass powder (GP) as a partial substitute for cement in concrete matrix. The research focuses on assessing the effect of this sustainable alternative in concrete by investigating the various properties of fresh concrete such as workability, mechanical and durability aspects. Specimens were prepared with GP replacement to cement at 5%, 10%, 15%, and 20% levels, with comparative …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1058–1068 Read article
-
Sustainable Approach for Waste Composites Management
Abstract: In our society, Waste Management (WM) plays a vital role. The complexities of waste management is discussed in introductory piece delves into exploring effective methods of handling it. The primary driver of increasing waste production is the growing global population. A challenging task is to tackle the vast amounts of waste generated required significant investment in labor, technology, financial resources, and expertise too. Varied strategies and techniques for managing solid …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 83–88 Read article
-
Mathematical Modeling Analysis of India's Accident &Use of Fly Ash and Polymers in Road Safety
Abstract: Accident predicting models (APMs) are exceptionally strong tools for adaptation and mitigation strategies because they have the ability to predict both the severity and frequency of crashes. Road accidents are a major problem all throughout the world, especially in developing countries. Understanding the key variables that contribute can assist in reducing the frequency of traffic collisions. This study also discovered recent developments on fly ash, green composites, other polymer materials …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 488–499 Read article
-
Composite Gel-Fibers and Solid-State-Processed Tapes Based on Disentangled Ultra-High Molecular Weight Polyethylene and Electrically Conductive Carbon Black: a Comparative Study
Abstract: In this study, oriented nanocomposite gel-spun fibers and solid-state-processed tapes were manufactured and analyzed. The fibers and tapes were produced using a specific type of nascent disentangled ultra-high molecular weight polyethylene (UHMWPE) reactor powder. As the filler, commercially available electrically conductive carbon black (CB) was used. The ultra-high filler content values up to 75 wt.% were achieved for the UHMWPE/CB gel-spun fibers, while the degree of filling was limited (up …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 151–165 Read article
-
Simplified Solution to Analysis Risk Assessment of Reinforcement type Soil Wall Considering Seismic Waves with Uniform Surcharge
Abstract: Due to failure of reinforced soil wall in various country the various risk factor are associated to these failure. In the present pseudo-static analysis some risk factor analysis have been done by considering the seismic waves with uniform surcharge and also consider surcharge’s inertial behavior at risk factor of horizontal and vertical coefficients of accelerations at kh = 0.24, 0.36 and kv = 0.12, 0.18 taking into account. The earlier …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 452–458 Read article
-
Integrative Machine Learning Approaches for Predicting the Rheological Behaviour of Soft Magnetorheological Elastomers
Abstract: Magnetorheological Elastomers (MREs) are advanced composite materials known for their ability to alter mechanical properties under external magnetic fields, making them highly valuable in adaptive damping systems, vibration control, and smart devices. The accurate prediction of rheological behavior in soft MREs remains a significant challenge due to the complex interplay between material composition and magnetic fields. To address this challenge, this study employs a multi-pronged approach that integrates traditional material …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1083–1096 Read article
-
An assessment of the mechanical properties of a composite material composed of natural fibres and reinforced with polymer
Abstract: Composites are essential in contemporary engineering and production, providing a flexible and effective solution for various applications that demand lightweight materials with exceptional performance. Natural composites provide adaptable and eco-friendly solutions for various sectors and applications, promoting environmental sustainability and the preservation of resources. Further advancements in research and development in this discipline are anticipated to enhance the utilization of natural composites across several industries. For this investigation, two types …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 778–786 Read article
-
A Comprehensive Review of Magnesium Matrix Composites (MMCs) and Its Manufacturing Techniques
Abstract: Magnesium matrix composites (MMCs) can overcome the mechanical properties of magnesium alloys by adding reinforcements. These MMCs have properties of hydrogen storage, high specific stiffness and strength, superior dimensional stability, exceptional shock absorption capability, and excellent electromagnetic shielding. No other component can compare with these unique and remarkable capabilities. In recent days, the MMCs have become more attractive in many industries, like aerospace, defense, automotive, electronic packaging and also in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1040–1050 Read article
-
Impact of Chemical Conditioning on the Mechanical Performance of Pine Fibre-Reinforced Composites
Abstract: The study examines the effects of treatments like alkaline, silane, and acetylation on enhancing the mechanical strength and reducing water absorption in pine fiber-reinforced composites. Natural fibres, while eco-friendly and sustainable, present challenges in fibre-matrix adhesion due to their hydrophilic nature, impacting composite performance. Chemical treatments were employed to modify fibre surface characteristics, enhance interfacial bonding, and thereby improve mechanical properties. Silane-treated composites exhibited the highest tensile and flexural strengths, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 140–150 Read article
-
Experimental and Numerical Studies on Radial Tensile Strength of Composite Rotor
Abstract: This paper describes the experimental and numerical studies on the radial tensile strength (RTS) of composite rotor. Carbon/epoxy composite rotors were fabricated using a filament winding process and their radial tensile strength was determined by diametric tensile testing of composite C-rings. The radial tensile strength of the composite rotor was measured as ~ 22 MPa and the failure was found to occur circumferentially symmetric about the horizontal plane of the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 985–996 Read article
-
Polymer Use in Soilless Farming Systems with A Comparative Study on Hydroponics and Aquaponics
Abstract: Hydroponics and aquaponics are innovative, sustainable agricultural methods that achieve high productivity with minimal land and water usage in controlled environments. Hydroponics, a technique that involves growing plants in nutrient-rich water solutions, utilizes various polymer-based components. Aquaponics, a symbiotic system combining aquaculture and hydroponics, also relies on polymer-based materials. These soilless techniques are crucial for producing vegetables, fruits, and other crops without relying on soil, allowing adaptability across various locations. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 868–874 Read article
-
A Method to Produce a GIS Database of Asphalt Polymer Pavement Distress of National Highway
Abstract: Bitumen, often referred to as asphalt in its solid form, is a complex mixture of organic compounds derived from the distillation of crude oil. Its chemical composition varies depending on its source, processing methods, and intended application. Pavement surface monitoring is an important part to increase the life of pavement and to minimize the cost incur in maintenance of pavement at an early stage. Traditionally pavement monitoring done using manually …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 99–108 Read article
-
Investigation of Electronic Transport Characteristics of Co-Doped B40 Molecular Junction for Detection of Isoprene: A DFT Study
Abstract: The early identification of lung cancer is crucial and it can be diagnosed non-invasively by assessing the exhalation. Analysing a patient's breath profile can reveal malignant growths in their lungs. In this work, B40 co-doped with indium and iron is used as a molecular junction to sense isoprene, a well-known lung cancer biomarker present in the exhalation. The electronic transport characteristics of the molecular junction designed for isoprene detection are …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 907–916 Read article
-
Drilling Parameters Optimization in LM6/B4C/Fly ash Hybrid Composites by Taguchi Technique
Abstract: Aluminium matrix composites (AMCs) are challenging to machine due to its abrasive characteristics. Because of the broad adoption of MMCs, it is vital to create sufficient equipment to facilitate efficient manufacturing. The current study utilizes signal-to-noise ratio (S/N) analysis to determine the ideal machining parameters for drilling AMC’s. The goal with this study is to investigate the effect of feed rate (FR), drill type (D), speed (SS), reinforcing material R …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 890–897 Read article
-
Development of Novel Polymeric Articulating Papers for Enhanced Occlusal Contact Assessment in Dentistry
Abstract: Traditional articulating papers, a mainstay in occlusal analysis, often exhibit limitations in consistency and difficulty with quantitative data analysis. This study explores the development of novel articulating papers utilizing advanced polymeric materials. These novel papers aim to address the shortcomings of traditional options by potentially improving: (1) sensitivity and resolution for capturing occlusal contacts, (2) consistency and reproducibility of contact readings, and (3) durability and reusability. The successful development of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1004–1011 Read article
-
Energy Harvesting Circuits with Piezoelectric Material: Design, Integration, and Optimization
Abstract: Piezoelectric energy harvesters (PHE) have drawn significant interest as a method of harvesting environment energy to power because of its compatibility and high energy density. Integrating piezoelectric energy harvesters into wireless sensor networks, Internet of Things (IoT)) devices, and wearable electronics enhances their functionality and also increases sustainability. This integration can be lead to the development of self-powered devices that can operate continuously without the need for external power sources. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1028–1039 Read article
-
Effect of Drilling Process Parameters on Surface Roughness of LM6/B4C/Fly Ash Hybrid Composites
Abstract: This research seeks to assess the effect of process variables such as feed rate (FR), spindle speed (SS), drill material (DM) and reinforcement (R%) on surface roughness (SR) when drilling LM6/B4C/Fly ash hybrid composites. The stir casting process was used to fabricate the LM6/B4C/Flyash hybrid composites utilizing LM6 aluminum alloy as the matrix material and B4C/Fly ash as strengthening materials. Experiments were carried out using an L18 orthogonal array (OA) …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 898–906 Read article
-
Synthesis and Photoluminescence Dynamics of Europium (III) and Terbium (III) Co-doped of GdSrAl3O7 Color-Tunable Nanophosphors
Abstract: A series of Europium (III) and Terbium (III) co-doped GdSrAl3O7 color-tunable nanophosphors were synthesized by a simplistic, streamlined and self-propagating, urea-assisted solution combustion synthesis process. The structural and luminescence characteristics of synthesized Eu3+/Tb3+ co-doped Gadolinium Strontium Aluminate nanocrystalline phosphors were validated using powder X- ray diffraction (PXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X- ray analysis (EDAX), and photoluminescence spectra studies. The morphological studies revealed that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1069–1082 Read article