All articles
1751 articles
-
Numerical Investigation on Concrete Filled Steel Tube Composite Circular Columns Under General Loading
Abstract: Concrete-filled steel tube (CFST) composite columns are extensively utilized in civil engineering constructions because of their numerous structural advantages, such as superior seismic performance, high load- bearing capacity, fire resistance, remarkable ductility, and ability to absorb energy effectively, especially in areas prone to seismic activity. CFST columns are employed in tall buildings and bridges to enhance rigidity and increase bearing capacity, but their behavior can be affected by buckling. There …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 164–199 Read article
-
Synthesis and Characterization of Forsterite Incorporated HDPE Composites for Microwave Substrate Application
Abstract: High Density Polyethylene (HDPE) combined with dispersed forsterite (Mg₂SiO₄) powder was utilized to fabricate polymer matrix composites (PMCs) aimed at high-frequency microwave substrate applications. Forsterite powders were synthesized using the mixed oxide method, and their phase purity was confirmed by X-ray diffraction (XRD) analysis. The dispersion and morphology of the ceramic filler within the HDPE matrix were examined through Scanning Electron Microscopy (SEM), ensuring a homogeneous distribution essential for optimal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 109–120 Read article
-
Advancements In Metal-Fiber Composites for Aerospace and Defense Applications: A Comprehensive Review
Abstract: This paper provides a comprehensive review of fiber-reinforced composites, focusing specifically on the utilization of metal-fiber composites in aerospace such as metal surface preparation prior to bonding, resin selection, and detailed examination of mechanical testing and impact studies. The significance of metal surface preparation for establishing strong bonding, which is a crucial initial step in composite fabrication, is discussed. Additionally, the prevalent use of epoxy resins and their importance in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 96–108 Read article
-
Enhancing Mechanical Properties by Parameter Optimization in Fiber and Particle Reinforced Composites
Abstract: This research focuses on optimizing the mechanical and thermal properties of hybrid fiber and particle-reinforced composites through systematic parameter optimization using the Taguchi method and Grey Relational Analysis (GRA). Composites were fabricated using varying fiber volume fractions (20%, 30%, and 40%), particle sizes (20 μm, 60 μm, and 100 μm), and curing temperatures (60°C, 80°C, and 100°C) in a 3-factor, 3-level experimental design. Key properties such as tensile strength, impact …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 75–85 Read article
-
Enhancing Performance of Hybrid Natural Fiber Reinforced Polymer: Insights into Processing, Characterization and Machining
Abstract: Natural fibre reinforced polymer composites (N-FRP) have gained popularity in recent years as an alternative to regular polymer composites, owing to growing environmental concerns. Natural fibers are becoming increasingly popular due to their outstanding properties such as flexibility, strength, compatibility with living creatures, and impact resistance. A notable application of natural fibers is in the medical industry, with the goal of producing cost-effective, sustainable, and long-lasting products. Combining different fibers …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 139–153 Read article
-
Novel Amino Silanes for Inhibition and Dissolution of Aldol Polymer for Caustic Tower in Cracker Plant
Abstract: Aldol polymer fouling in petrochemical plant is an undesirable process, which needs to be removed for increasing the efficiency of downstream process. In this paper, inhibition and dissolution efficiency of the aminopropyl trimethoxy silane (APTMS), aminopropyl triethoxy silane (APTES), sodium salt of aminopropyl trimethoxy silane (SS-APTMS), sodium salt of aminopropyl triethoxy silane (SS-APTES) were studied at different molar ratio of vinyl acetate (VA):amino alkoxy silane (antipolymerant). The sodium salt of …
Published in Journal of Petroleum Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 35–48 Read article
-
Enhancing The Mechanical Performance of Al6061/Graphite Composites Reinforced with Sic and Aluminium Oxide Processed by Stir Casting
Abstract: The study investigates the mechanical properties of aluminum alloy Al6061 reinforced with varying proportions of silicon carbide (SiC) (0 wt%, 4 wt%, 5 wt%, and 6 wt%) and aluminum oxide (Al₂O₃) (0 wt%, 4 wt%, 3 wt%, and 2 wt%), with a constant addition of 1 wt% graphite. The composites were fabricated using the stir casting process, an efficient and economical method for uniformly distributing ceramic reinforcements within the metal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 66–74 Read article
-
Enhancing Concrete Performance With GGBFS: An Analysis of Strength Characteristics at Various Replacement Levels
Abstract: This study investigates the effect of ground-granulated blast furnace slag (GGBFS) as a partial replacement for cement on the mechanical properties of concrete. The primary objective was to assess the compressive, flexural, and split tensile strengths, along with the modulus of elasticity, at different replacement levels of cement with GGBFS and at distinct curing ages of 7, 28, and 56 days. Concrete mixes were prepared by replacing cement with GGBFS …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 121–138 Read article
-
Characterization of Nano-Clay Reinforced Polymer Composites: Enhancing Performance for Extreme Applications
Abstract: This study investigates the mechanical, thermal, water absorption, and chemical resistance properties of nano-clay-reinforced polymer composites and polymer concrete. The incorporation of 1-5 wt% nano-clay resulted in a significant enhancement across all properties. Mechanical testing revealed a 42.86% increase in tensile strength (35 MPa to 50 MPa), 40% improvement in flexural strength (50 MPa to 70 MPa), and 46.67% rise in compressive strength (75 MPa to 110 MPa), attributed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 105–114 Read article
-
Mechanical and Physicochemical Characteristics of Nano-Hydroxyapatite Polymer Composites
Abstract: This study focuses on the development and characterization of nano-hydroxyapatite (nHAp)-reinforced poly (lactic acid) (PLA) composites for biomedical applications. The composites, prepared with varying nHAp content (5–25 wt%), were evaluated for their mechanical and physicochemical properties, including tensile strength, Young’s modulus, elongation at break, thermal stability, hydrophilicity, and crystallinity. Results revealed that tensile strength increased significantly with the incorporation of nHAp, reaching a peak of 62 MPa at 15 wt%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 115–125 Read article
-
A Polymer-Based Recommender System for Precision Agriculture: Enhancing Crop Yield Analysis Using IoT Technology
Abstract: This study introduces an innovative recommender system that employs polymer-based sensors combined with advanced data analytics to deliver personalized recommendations for crop management optimization. The use of polymer-based materials in sensor design allows for the creation of durable, cost-effective, and efficient sensors, well-suited for the challenging conditions typical in agricultural environments. These sensors are designed to withstand variations in numerous factors like temperature of the surrounding, humidity level, and at …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 86–95 Read article
-
Comparison of 11-Atom Armchair Graphene Nanoribbons and Zig-Zag Carbon Nanotubes in Polymer Composites Under Various Bias Voltages: A Study of Electronic and Transmission Properties
Abstract: In this research, 11-atom zig-zag carbon nanotubes (ZCNTs) and 11-atom armchair graphene nanoribbons (AGNRs) were studied under applied bias voltages at 50, 150, and 300 millivolt levels. The focus was on understanding their behaviour concerning transmission qualities, current-voltage (I-V) characteristics, and energy-momentum (E-K) diagrams. The Non-Equilibrium Green's Function (NEGF) approach was employed to analyse various electronic properties for ZCNTs and AGNRs, including transmission, E-K relationships, and I-V characteristics. The results …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 126–134 Read article
-
Affect of Finite Element Modelling on Static Behavior of Underwater Shell
Abstract: The objective of the present study is to compare and contrast different numerical models based on their mesh quality and material properties in predicting the response of an underwater shell under an external pressure of 1 MPa. Two different mesh qualities with the same element size are developed for solid geometries without and with slicing the solids at geometric discontinuities to enhance the element quality. From the static response of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 154–163 Read article
-
E-glass Fiber Epoxy Composites: Role of Al2O3/SiC Fillers in Physical, Flammability and Mechanical Characteristics
Abstract: This study investigates the effects of varying weight percentages of Silicon Carbide and Alumina particles in epoxy-based composites, fabricated through compression molding, on their physical and mechanical properties. Comparing different studies on carbon fiber-reinforced polymer (CFRP) composites, as well as glass fiber-reinforced polymer (GFRP) composites, especially with the reinforcement of nanoparticles such as silicon carbide (SiC), alumina (Al2O3) and graphene. The investigations cover fabrication methods, like vacuum infusion and compression …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 238–250 Read article
-
Current-Voltage Characteristics of 15-Atom Agnrs and Zcnts at Various Bias Voltages: Insights for Polymer Nanocomposite Applications
Abstract: The present research investigates the electronic properties of 15-atom Armchair Graphene Nanoribbons (AGNRs) and 15-atom Zig-Zag Carbon Nanotubes (ZCNTs) under applied bias voltages of 100, 200, 300, 400, 500, and 600 millivolts. Using the Non-Equilibrium Green's Function (NEGF) technique, the study analyzes various electrical features, including current-voltage (I-V) characteristics, to understand the behavior of these nanostructures. The findings reveal that AGNRs exhibit a larger bandgap than ZCNTs, which have a …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 135–144 Read article
-
An Analysis of Machining Parameters for Metal Matrix Composite
Abstract: The electro-discharge machining analysis of hybrid Composite is presented in this work. Variables are chosen for the input process parameters. The material removal rate is acknowledged as an output parameter, together with the current, graphite and silicon carbide percentage and pulse on time. We used the Taguchi Method to conduct our experiments. To create the theoretical model and look into how process parameters affect the rate at which material is …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 76–85 Read article
-
Extraction Properties of Mangifera indica Seed Kernels: A Comprehensive Analysis of Their Industrial Potential
Abstract: Mango (Mangifera indica) is widely regarded as one of the world's finest fruits, with a rich nutritional profile, including fiber, riboflavin, carotene, and ascorbic acid. Among its lesser-known components, the mango seed kernel offers significant nutritional and industrial value. Mango kernels are composed of protein, fat, carbohydrates, crude fiber, and ash, and contain bioactive compounds such as polyphenols, phytosterols, and tocopherols. The fat extracted from mango seed kernels has shown …
Published in Journal of Petroleum Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 22–28 Read article
-
Mechanical Properties, Viscoelastic and Water Absorption Properties of Biocarbon-Reinforced Composites
Abstract: Biocarbon-reinforced polymer composites have emerged as a sustainable alternative to conventional composites, combining environmental benefits with promising material properties. This study explores the effect of varying biocarbon content (0%, 10%, 20%, and 30% by weight) on the mechanical, viscoelastic, and water absorption properties of a polypropylene (PP) matrix. Tensile strength tests reveal that incorporating 10% biocarbon yields the highest strength at 35 MPa, attributed to enhanced interfacial bonding. However, at …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 145–157 Read article
-
Mechanical Property Assessment of Hybrid Fiber Reinforced Composites Through Experimental Research
Abstract: Natural fibre reinforced composites are gradually taking the place of synthetic fibre composites due to its inexpensive cost, low density, and ease of supply. Furthermore, the addition of some waste materials to composites has remarkable properties that are attracting interest from a wide range of technical domains. Fibre reinforced with glass, carbon, and jute were used to generate hybrid composites. As a filler, different amounts of eggshell powder were mixed …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 244–251 Read article
-
Determination of Effect of Temperature on Bacteria and Fungi (Salt and Fresh Water)
Abstract: This study investigates the effect of temperature on bacterial and fungal activity in fresh and saltwater environments contaminated with crude oil. Utilizing standard characterization techniques, pure cultures of bacteria and fungi were isolated and identified. A bioreactor setup was employed to assess microbial growth and heat generation at varying temperatures (15°C to 120°C) over a 6-hour period. The results demonstrated that temperature significantly influences microbial activity, with bacterial growth rates …
Published in Journal of Petroleum Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 01–08 Read article