All articles
1751 articles
-
Firefly Algorithm–Based Optimization of Processing Parameters for Enhanced Performance of Polymer Composite Materials
Abstract: Polymer composite materials are extensively used in aerospace, automotive, and oil & gas applications due to their high strength-to-weight ratio and design flexibility. However, achieving optimal mechanical and thermal performance strongly depends on precise control of processing parameters such as curing temperature, energy consumption, and material utilization. Conventional trial-and-error approaches often lead to excessive energy usage, non-uniform curing, and sub-optimal composite properties. To address these challenges, this paper proposes an …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 90–107 Read article
-
Evaluating the Effect of Carbon Fillers on the Mechanical Properties of Jute and Epoxy Composite Wind Turbine Blades
Abstract: Natural fibers are a sustainable substitute for synthetic materials because of many benefits, which include light weight, biodegradability, renewability, and affordability. An approach to sustainable blade design that shows promise is its use into wind turbine blades. The study focuses on jute/epoxy composite's tensile strength, impact strength, water absorption, void fraction and degradation with carbon fillers and apply in making small wind turbine blades. To fabricate the composites, two jute …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 191–203 Read article
-
Bio-Derived TPS–Lignin Hybrid Composites Reinforced with Modified Coir and Plantain Fibers for Eco-Efficient Structural Applications
Abstract: This study develops bio-derived polymer composites using a thermoplastic starch–lignin (TPS–lignin) matrix reinforced with alkali-treated coir and plantain fibers for sustainable load-bearing applications. The TPS–lignin matrix was formulated using cassava starch, glycerol, and 10 wt% lignin, while coir and plantain fibers were surface-modified using 5 wt% NaOH to enhance interfacial compatibility. Composite laminates were fabricated with varying fiber loadings (10–40 wt%) through melt-mixing and hot-press compression. Tensile, thermal, morphological, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 136–145 Read article
-
Nano-Silica Reinforced Crosslinked Biopolymer–PCM Composites for Improved Thermal Cycling Durability
Abstract: Crosslinked biopolymer–PCM composites reinforced with nano-silica were developed to enhance thermal cycling durability, leakage resistance, and structural stability for advanced thermal energy storage applications. A starch-based biopolymer was chemically crosslinked using citric acid to create a stable polymer network, while paraffin was employed as the phase-change medium and nano-silica (1–4 wt%) served as a multifunctional inorganic reinforcement. FTIR analysis confirmed successful esterification between citric acid and the polymer backbone, indicated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1–10 Read article
-
Styrene, Carbonate Materials to Minimize Aberration in Free Space Optical Communications
Abstract: Enhancing wireless connectivity, particularly in harsh weather circumstances, is possible through the use of polymer-based materials in Free Space Optical (FSO) communication systems. In the production of optical components like lenses, beam shapers, and protective enclosures for FSO transmitters and receivers, polymers are being used more and more because of their lightweight, affordable, and adjustable optical qualities. This study examines how well a polymer-integrated FSO link performs over 1–10 km …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 675–686 Read article
-
Perfluorinated Composites for Optical Fiber Development for Optical Communications
Abstract: Free Space Optical (FSO) communication is a new generation of high-speed technology that utilizes light as the carrier to transfer information through free space, e.g., air, outer space, and vacuum. In comparison with traditional systems of communication, FSO offers a wonderful bandwidth advantage with less cost and ease of installation. This study compares the performance of two other FSO systems using advanced polymer composites such as Perfluorinated polymers in designing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 661–674 Read article
-
Fabrication and Analysis of PBAT/Cyperus Rotundus Micro Crystalline Cellulose Biofilms for Food Packaging Applications
Abstract: Global plastic waste crisis has gained an increasing attention and many efforts have been made recently to develop biodegradable polymers as food packaging alternatives. Solution casting is used for fabrication and characterization of reinforced polybutylene adipate-co-terephthalate (PBAT) biofilm with Cyperus rotundus microcrystalline cellulose (CRC). PBAT-CRC biofilms with different CRC loadings (1%, and 2%) had been prepared and their structural, mechanical, thermal and morphological properties of fabricated biofilms were analyzed to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 591–599 Read article
-
Machine Learning-Driven Polymer Composite Smart Skin for Integrated Sensing in Soft Robotic Systems
Abstract: Soft robotics has grown rapidly, but its progress is still constrained by the limitations of current sensing skins. Most polymer-based sensors provide either flexibility or sensitivity, yet they struggle to deliver real-time communication and adaptive intelligence when deployed in complex robotic environments. This disconnect between material performance and system-level responsiveness forms a critical bottleneck for practical deployment. Existing approaches often treat tactile sensing and wireless communication as separate problems. As …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 121–136 Read article
-
Hybrid Epoxy Composites with Areca and Abaca Fibers: Effect of Nano-SiO₂ on Mechanical Properties
Abstract: This study explores the fabrication and mechanical evaluation of sustainable epoxy-based hybrid composites reinforced with Areca fiber (ARF), Abaca fiber (ABF), and nano-silica (SiO₂). The composites were made using a hand layup process, maked five variants (S1–S5) with ARF content ranging from 0–40 wt% and nano-silica content from 0–8 wt%, while maintaining ABF as the primary reinforcement. Mechanical performance was assessed through tensile strength (TS), flexural strength (FS), and impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 606–613 Read article
-
Mechanical Performance and Material Properties of Nsm CFRP Polymer System
Abstract: Near-surface mounting systems are an advanced embedded technique application of CFRP composites in which the efficiency of the structure is mostly dominated by polymer matrix properties and interface stress transfer mechanisms. This review presents a holistic materials-based perspective on the experiment, analytical, and numerical studies conducted on the NSM-CFRP composite system, specifically on the behavior of the epoxy adhesive, interfacial behavior of composite–substrate system, and related structure–property relationships. The literature …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 311–319 Read article
-
Computational Fluid Dynamics and Composite Material Study on Scoop-Type Savonius Turbine for Train-Based Energy Generation
Abstract: This study investigates the feasibility of integrating a scoop-type savonius vertical-axis wind turbine (VAWT) on the rooftop of a moving train to generate renewable onboard power. The motivation stems from increasing demands for sustainable energy solutions and reducing reliance on fossil fuels, particularly in transportation. A two-blade savonius turbine, with dimensions of 0.4 m in diameter and 0.5 m in height, was modeled in PTC Creo Parametric 3.0 and analyzed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 566–580 Read article
-
Design And Analysis of Carbon Filler Reinforced Composite Small Wind Turbine Blades
Abstract: Although wind turbines have great potential for capturing wind energy, their blades suffer from unstable aerodynamic loads as a result of operating for extended time in challenging conditions. Both structural and aerodynamic performance are negatively impacted by these loads. The effectiveness of the wind turbine and the use of wind energy are significantly impacted by the choice airfoil. Commonly used airfoils include NACA 4412, NACA 23012, and SG6043. The lift …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 79–89 Read article
-
Polymeric Hybrid Systems Engineered with Multiple-Stage Energy Absorption for Temperature Control
Abstract: Polymer–composite based phase change systems offer an effective strategy for adaptive thermal management; however, most existing systems exhibit single-stage latent heat transitions, limiting their applicability in environments with fluctuating thermal loads. In this study, a thermoplastic polyurethane (TPU) polymer matrix was reinforced with two microencapsulated paraffin-based phase change materials (PCM-A and PCM-B) to achieve multi-level latent heat storage behavior. The fabricated TPU/PCM-A10–B20 polymer–composite demonstrated two distinct endothermic transitions at approximately …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 146–155 Read article
-
Thermal Stability and Impact Performance of Basalt–Carbon Hybrid Laminates in Polyimide–Phenolic Matrices
Abstract: The impact resistance and thermal stability of the advanced polymer composites are properties that are necessary for the components that are subjected to dynamic conditions, which show the overall reliability and service performance of the laminates applied in automotive structures, protective casings, etc. These properties prevent premature softening or breakdown during long-term exposure to heat. Impact resistance and thermal stability of composite laminates are studied based on fiber orientation and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 247–260 Read article
-
Modeling of MHD Hybrid Nanofluid Flow with Radiation and Chemical Reaction Effects for Advanced Composite and Energy Applications
Abstract: Hybrid nanofluids reinforced with polymer-based matrices and nanoparticles have emerged as promising working fluids for advanced composite processing and thermal management systems. Their superior thermo-physical properties enable efficient cooling and energy transport, making them suitable for applications in polymer extrusion, composite curing, thermal insulation coatings, solar energy devices, electronic packaging, and nuclear system cooling. In this study, we investigate the heat and mass transfer behavior of magnetohydrodynamic (MHD) hybrid nanofluid …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 648–660 Read article
-
A Mini Review of Synthesis and Applications of Functionally Graded Materials
Abstract: Material composition or microstructure varies gradually along the thickness over a specific volume in functionally graded material (FGM) that results in spatial change in properties like thermal conductivity, strength, stiffness, electrical, magnetic, and light properties, etc. Application of the concept of FGM leads to a single product that has multiple properties in it as demanded by the operational or functional requirements of the product under service conditions. It also allows …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 54–65 Read article
-
Engineered Hybrid Nanoclay-Infused Nano-Polymers for Multifunctional Anti-Corrosive Coatings
Abstract: Polymer nanocomposites reinforced with layered nanofillers have emerged as an effective route to enhance structural stability in protective coating applications. Polymer–clay nanocomposites also provide a promising route to enhance mechanical robustness and environmental durability in coating systems. In this study, a hybrid epoxy–polyurethane (EPU) coating was reinforced using organo-modified montmorillonite (o-MMT) and layered double hydroxide intercalated with 2-mercaptobenzothiazole (LDH–MBT). Uniform dispersion and interfacial anchoring between the nanoclays and polymer chains …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 40–53 Read article
-
Enhancement of Mechanical Properties in Hemp Fiber-Reinforced Epoxy Composites Using Graphene Nanoplatelets
Abstract: This study investigates how incorporating graphene nanoplatelets (GNPs) influences the mechanical performance of hemp fiber–reinforced epoxy composites. Hemp fibers were chemically treated by alkali treatment to improve fiber–matrix adhesion owing to their high specific strength, stiffness, renewability, and environmental friendliness. Graphene nanoplatelets were dispersed in acetone by probe sonication and added to acetone epoxy matrix at a concentration of 0.5 wt% and 1.0 wt%, respectively. Composite laminates were prepared by …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 98–109 Read article
-
Regression Analysis of Topological Indices and Physicochemical Properties of Polymer-Based Anticancer Drugs
Abstract: The research analyzed the quantitative correlation between topological indices and the physicochemical properties of selected anticancer compounds using regression analysis. Various topological descriptors—such as the First Zagreb Index, Second Zagreb Index, and Forgotten Index were calculated and regressed against key molecular features, including polar surface area, melting point, and molar refractivity. The regression analysis revealed linear correlations between these topological indices and the properties of anticancer drugs, with particularly strong …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 255–267 Read article
-
Superplasticity Behavior of Aluminium Alloys Through FSP: A Review
Abstract: Friction Stir Processing (FSP), an advanced modification of Friction Stir Welding (FSW), has emerged as a highly effective technique for fabricating surface composites with superior mechanical and metallurgical properties. FSP enhances the microstructure and superplastic behavior of materials, particularly aluminium alloys, by subjecting them to high strain rates at relatively low temperatures. This review paper critically examines the development and optimization of FSP for aluminium alloys, emphasizing key factors such …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 65–77 Read article