Emerging Trends in Chemical Engineering
Volume 6, Issue 2 (2019)
Published
Table of contents
-
SIMULATION OF ETHANOL DISTILLATION USING CHEMCAD
Abstract: Aiming for Sustainable and low-Cost operation of ethanol distillation. The recovery step is usually carried out during the distillation process and is challenging, particularly regarding purity, operating cost issues. This study aimed to evaluate the ethanol distillation from ethanol-methanol and water mixture as a function of the reflux ratio in a process employing a Fractionating column. Test were performed using a standard mixture of ethanol, methanol and water using total …
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 2, 2019 · pp. 1–6 Read article
-
Corrosion inhibitors of steel made implements
Abstract: Corrosion of steel in industrial weather is ever possible mechanism for failure by loss in weight. Of many materials steel forms most suitable property cluster for industrial infrastructure i.e. from ambient weather to acid plants. Therefore steel is to be protected from corrosion by industrial weather, which may be either by alloy formation or paints or coatings similar to paints. Alloy formation from steel with elements those produce surface adhered …
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 2, 2019 · pp. 20–27 Read article
-
Inhibitors for 2000 series from aluminum
Abstract: Corosion inhibitor is traditional procedure to protect under any weather. Use of inhibitors have formed thin coating film as well film having hydrofobic to super hydrophobic properties. Angle of contact for weather chemical is simplest test appeared to depend on stabilization of surface under interest. Inihibitor considerations have appeared from hybrid toxic-nontoxic to purely green inhibitors to reproduce as environmentally friendly usage. Inhibitors applicable during anodization has technical importance from …
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 2, 2019 · pp. 28–38 Read article
-
Latex Modified Concrete for Development of Sustainable Architecture
Abstract: To improve the performance of concrete, latex polymer and fly ash are mixed with concrete. This paper presents the effects of using additive material styrene-butadiene rubber (SBR) Latex and Admixture Fly Ash as a partial replacement to cement in mortar mixes. In this research comparison between with or without the replacement of fly ash and polymer is studied for Compressive strength, split tensile strength, flexural strength and ultrasonic pulse velocity …
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 2, 2019 · pp. 39–49 Read article
-
Aluminum and its Alloys to Recover from Corrosive Weather
Abstract: Corrosion is defined as deterioration of material, usually metal, because of reaction with its environment and which requires presence of an anode, a cathode, an electrolyte and an electrical circuit. Aluminum and its alloys are reactive to weather of exposure, e.g. ambient, acid and alkalis. Solid to pigments are prevented from corrosion by using inhibitors. Organic inhibitors are ever praised due to non-toxic performances. Basic processes are surface adsorption to …
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 2, 2019 · pp. 7–19 Read article