wear resistance
12 articles · search the full text for this term
-
Performance Evaluation of Kevlar-Sisal-S-Glass Hybrid Composites with Ceramic Fillers for Structural Applications
Abstract: This study examines the mechanical properties of hybrid composite laminates reinforced with Kevlar, sisal, and S-glass fibers, and incorporating ceramic fillers—silicon carbide (SiC) and aluminum oxide (Al2O3)—within an epoxy matrix. The hand lay-up method was utilized to produce the laminates, ensuring a uniform fiber stacking sequence and including 10% filler material. Two composite variations were synthesized: one incorporating SiC and the other Al₂O₃, and both underwent tensile, flexural, hardness, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1308–1322 Read article
-
Development of Multilayer Metallic Coatings with Graded Interfaces for Enhanced Wear and Fatigue Resistance in Aerospace Components
Abstract: This study presents a comprehensive investigation into the development and characterization of multilayer metallic coating systems with compositionally graded interfaces, specifically engineered to enhance wear and fatigue resistance in aerospace structural and rotating components. Four coating architectures were systematically designed: (i) CrN/TiAlN bilayer, (ii) TiN/TiAlN/TiAlSiN gradient trilayer, (iii) CrAlN/AlCrN nanolaminate, and (iv) a novel five-layer CrN–TiN–TiAlN–AlCrN–TiAlSiN functionally graded system (FGS). Coatings were deposited via high-power impulse magnetron sputtering (HiPIMS) and …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 50–67 Read article
-
Investigating the Mechanical Properties and Microstructure of AA 7074 Composites with Silicon Nitride Reinforcement
Abstract: This study investigates the mechanical and microstructural properties of AA 7074 aluminium alloy reinforced with 1%, 3%, and 5% by weight of silicon nitride (Si₃N₄), fabricated via the stir casting method, intended for structural aerospace applications. A thorough series of mechanical tests—comprising tensile, compression, hardness, impact, flexural, and wear tests—was performed to assess the influence of differing reinforcing content. The composite containing 5 wt% Si₃N₄ (SN5) demonstrated the most pronounced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 268–281 Read article
-
A Review on Effect of Cryogenic Treatment on Wear Resistant Bearing Materials for Automotive Application
Abstract: Cryogenic processing has come as a successful supplementary process to common heat treatment, especially in improving the wear-resistant performance of materials employed in in-vehicle applications. This sub-zero processing is normally performed following quenching and before tempering, during which materials are subjected to extremely low temperatures, typically around -196°C, for prolonged periods of 24 hours. Cryogenic treatment, which involves subjecting materials to extremely low temperatures, has demonstrated promising results in changing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1–11 Read article
-
Advances in Laser Hardening: A Review on Techniques, Trends and it’s Applications
Abstract: This review paper examines laser hardening, an advanced surface treatment method, and its impact on automotive components. By analyzing findings from numerous studies, the paper categorizes various laser hardening techniques and evaluates the effect of parameters like speed of scanning , power of laser and beam diameter on material performance. Special attention is given to the microstructural changes and wear resistance enhancements achieved through laser hardening, highlighting its precision and …
Published in International Journal of Solid State Innovations & Research · Vol. 3, Issue 2, 2025 · pp. 1–10 Read article
-
Enhanced Mechanical and Tribological Performance of Magnesium–Boron Carbide Composites Fabricated via Stir Casting for Lightweight Structural Applications
Abstract: This study investigates the fabrication and evaluation of properties of magnesium (Mg) matrix composites reinforced with boron carbide (B₄C) for lightweight structural applications. Stir casting was employed to incorporate B₄C particles at varying weight fractions (0%, 3%, 6%, and 9%) into the magnesium matrix. The influence of B₄C on density, porosity, hardness, tensile strength, and wear resistance was systematically examined. Theoretical density increased from 1.74 g/cm³ (pure Mg) to 1.88 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 29–39 Read article
-
Advanced Coating Techniques: Improving Metal Longevity through Nanocomposite Applications
Abstract: In order to protect metal and lessen wear and tear, this topic has scriptive issues pertaining to coatings that are applied to metal surfaces. Components in slurry pumps have better wear and abrasion resistance compared to their surface properties. An interface region has been used to separate at least two immiscible phases in the material that makes up a nanocomposite coating. Fillers have become a major constituent of the matrix, …
Published in Journal of Catalyst & Catalysis · Vol. 11, Issue 3, 2024 · pp. 01–08 Read article
-
Experimental Investigation of Micro-Hardness & Tribological Behavior of Composite Coating for Wear Resistance Application
Abstract: The author effectively created a composite coating with enhanced durability utilizing the HVOF technique in this investigation. The automobile business has encountered fierce worldwide rivalry, rapid technical breakthroughs, and strict regulatory regulations in recent year.. Producers of lubricants, gasoline additives, and worldwide original equipment manufacturers (OEMs) are striving to address the difficulties presented by changing consumer preferences and emerging energy conservation and environmental protection regulations. We have successfully created and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1097–1103 Read article
-
An Overview: Design of Nanocomposite Coatings
Abstract: The call for high productivity, quality in machined surfaces, and reduced machining costs have put a demand on the improved cutting tools. The recent advancements in development of nanocomposite coatings which consist of crystalline and amorphous phase have made dry machining at high speeds with quality in machined parts a reality. The driving force behind the super hard structure of such coatings is phase segregation mechanism. In this work, a …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 2, Issue 3, 2015 · pp. 1–4 Read article
-
Wear Characteristics of Aluminium-Graphite Composites Produced by Stir Casting Technique
Abstract: Metal matrix composites (MMCs) are finding more applications due to their significantly improved properties such as high specific strength, high specific modulus, good damping capacity and good wear resistance compared to unreinforced alloys. In recent years, there has been an increasing interest in composites containing low density and low cost reinforcements. Graphite is one of the most suitable and low density reinforcement available for making light-weight and wear resistant parts …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 3, 2014 · pp. 13–20 Read article
-
Effect of Cryogenic Treatment on Wear Characteristics of T42 High Speed Steel
Abstract: In this study cryogenic treatment is performed on AISI T42 HSS material and its wear characteristics are studied. Test of treated and untreated samples is taken on pin on disc wear testing machine at different loads and RPMs. The wear of the sample is measured. The wear resistance of the samples is also measured by weight loss method. The results are tabulated. An experimental effort to evaluate tool wear improvement …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 2, 2016 · pp. 70–79 Read article
-
Computational and Experimental Analysis of Nitride Coated Cutting Tools
Abstract: 800x600 Utilization of harder and tougher cutting tool materials is essential in cutting tool industry.Nitride coated cutting tools are becoming alternative materials for machining various materials due to its high mechanical and tribological properties. Demand for coated cutting tools is increasing because of reduced cutting force, increased hardness and wear resistance.In this research article, the TiAlN and CrN coated cutting tool materials for metal removal are studied and compared with …
Published in Journal of Experimental & Applied Mechanics · Vol. 6, Issue 3, 2015 · pp. 65–72 Read article