Thermal stability
37 articles · search the full text for this term
-
Optimizing Performance Characteristics, Thermal Stability, and Manufacturing Performance of Polymer Nanocomposites Using Artificial Intelligence
Abstract: Artificial intelligence (AI) has proven an efficient method to optimize the design and manufacture of polymer nanocomposites, allowing the proper prediction of the behavior of the materials and the results of the processing. This work proposes an AI-based framework to enhance the performance characteristics, thermal stability and manufacturing performance of advanced polymer nanocomposites. The input variables of the proposed framework are the material composition, the nanoparticle concentration, the particle size, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Fabrication, Interfacial Characterization, and Superparamagnetic Properties of Fe₃O₄@γ-Fe₂O₃ Core/Shell Nanoparticle-Reinforced Chitosan Biopolymer Composites
Abstract: Magnetite/maghemite core/shell nanoparticles were prepared by alkaline co-precipitation of Fe(II) and Fe(III) precursors followed by controlled thermal oxidation at 350 °C and subsequently incorporated into chitosan at 1, 3, and 5 wt% loadings by solution casting. The resulting films were evaluated by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), high-resolution transmission electron microscopy (HR-TEM), vibrating-sample magnetometry (VSM), thermogravimetric analysis (TGA), and tensile testing. XRD showed the characteristic cubic spinel reflections …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Ultrasonic Dispersion of Halloysite Nanotubes for Enhanced Mechanical, Thermal, and Morphological Performance of Epoxy Composites
Abstract: Halloysite nanotube (HNT)-reinforced epoxy nanocomposites were prepared by mixing HNT with bisphenol-A epoxy (LY 556) using ultrasonication, followed by compression molding. HNT contents of 0–5 wt.% were used. The composites were evaluated for tensile strength, flexural strength, Shore D hardness, Izod impact strength, and thermal stability using thermogravimetric analysis (TGA). The fractured tensile surfaces were also examined to understand the failure mechanism and interaction between HNT and the epoxy matrix. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 212–226 Read article
-
Rheological Studies of a Cross-Linked Polymer Gel System
Abstract: The petroleum accumulations are found associated with water and it is rarely obtained without accompanying water production. Water production is a major technical, environmental, and economic challenge associated with oil and gas extraction. Rheological findings are of fundamental importance for the development, manufacture and processing of innumerable products. Polymeric gels exhibit a wide range of rheological properties and they are stable both mechanically and thermally in most cases thus are …
Published in Journal of Petroleum Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 13–26 Read article
-
Design and Performance Analysis of Natural Rubber–Silica Nanocomposite Vibration Isolators for Household Appliances
Abstract: Natural rubber (NR) nanocomposites reinforced with surface-modified precipitated silica (SiO2) were synthesized through a two-roll mill compounding and compression-moulding process, then systematically evaluated as passive vibration isolator materials for domestic washing machine applications. Five silica loadings 0, 5, 10, 15, and 20 phr were investigated. A comprehensive characterization suite encompassing tensile testing, Shore A hardness, dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) revealed clear structure–property …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 554–560 Read article
-
Material-Integrated Energy Management: Role of Advanced Polymers and Composites in Smart Homes
Abstract: The article discusses the possibility of improving the performance as well as the sustainability of smart-home-based energy management systems (EMS) by applying advanced polymeric and composite materials. Smart homes today are placing greater requirements on lightweight, thermally stable, high durability, and electrically conducting compounds in such important aspects of the devices as batteries, substrate layers in solar panels, thermally resistant enclosures, and high efficiency thermal insulation on intelligent appliances. Such …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1361–1374 Read article
-
Thermal Stability and Sound Absorption Behaviour of Sisal–Luffa Hybrid Epoxy Composites for Automotive Interior Applications
Abstract: Natural fiber–reinforced composites are gaining popularity as substitutes for synthetic fiber composites because of their environmental and sustainability advantages. Their adoption is steadily increasing across various industries. In automotive interior applications, these materials must exhibit strong thermal stability and efficient sound absorption to meet performance requirements. In this experiment, composites were made by mixing sisal and luffa fibers with epoxy resin. The hand lay-up method was used for fabrication. Two …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 144–157 Read article
-
Kenaf Reinforced Polyamide Composite Materials: A Systematic Review
Abstract: Sustainable development has become the global target to prevent exploitation and degradation of our environment in the pursuit for industrial growth. Almost all sectors including engineering, dental, medical, aerospace, etc use synthetic polymers in daily basis. The growing need for sustainable natural alternatives has encouraged research on natural fibres reinforced polymers like kenaf reinforced polyamide composites. Comprehensive evaluation of existing studies is crucial to understand the scope in this field …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 158–169 Read article
-
Structure–Property Relationships in Poly (N isopropylacrylamide) Hydrogels: Toward Thermoresponsive Polymer Composites
Abstract: Poly(N-isopropylacrylamide) (PNIPAAm) hydrogels can shift from solid to gel and back again at body temperature. Due to their lack structural integrity, thermal stability, and mechanical strength, they are difficult to use. This study mixed PNIPAAm with biocompatible fillers like chitosan and silicon nanoparticles to create hydrogels with superior structure-property correlations. Free radical polymerization with ammonium persulfate/TEMED initiator and N,N′-methylenebisacrylamide crosslinker produced the composites. Scanning electron microscopy showed a denser, interconnected …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 884–895 Read article
-
Grey Relational Analysis of Cuttlefish Bone Particles–Glass Fiber Reinforced Epoxy Composites
Abstract: This research examines the mechanical characteristics, water absorption performance, and thermal stability of epoxy composites reinforced with Cuttlefish Bone Particles (CFBP) and glass fibers. Composites were fabricated with varying CFBP contents (0%, 3%, 6%, 9%, and 12%) using an epoxy resin as the matrix material and glass fiber as the primary reinforcement. The experimental results revealed that the CFBP-0 composite (neat epoxy with glass fiber) exhibited the highest tensile strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 239–246 Read article
-
Polymeric Hybrid Systems Engineered with Multiple-Stage Energy Absorption for Temperature Control
Abstract: Polymer–composite based phase change systems offer an effective strategy for adaptive thermal management; however, most existing systems exhibit single-stage latent heat transitions, limiting their applicability in environments with fluctuating thermal loads. In this study, a thermoplastic polyurethane (TPU) polymer matrix was reinforced with two microencapsulated paraffin-based phase change materials (PCM-A and PCM-B) to achieve multi-level latent heat storage behavior. The fabricated TPU/PCM-A10–B20 polymer–composite demonstrated two distinct endothermic transitions at approximately …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 146–155 Read article
-
Innovative Polymer Nanocomposites: Bridging Sustainability and Advanced Material Performance
Abstract: This study examines the evolution of bio-based polymer nanocomposites using eco-friendly synthesis methods to improve mechanical, thermal, and barrier properties. It involves the combination of sustainable synthetic polymers with natural polymers in the presence of nanofillers in a green and compatible fashion to generate durable nanocomposites. Optimal alignment of nanofillers with the polymer matrices can be achieved using solvent casting, melt blending, and in-situ polymerization as fabrication methods. Consequently, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1671–1679 Read article
-
Simultaneous Improvement of Mechanical Properties and Thermal Stability of Polyvinyl Chloride Nanocomposite by Magnesium Aluminum-Layered Double Hydroxide
Abstract: The application of nanoclays in polyvinyl chloride (PVC) is limited as the organic modifier of conventional nanoclays can degrade PVC. Using usual nanoclays could reduce thermal stability due to the catalytic effects on PVC degradation, so the main chalenge is to find suitable nanoclay for PVC. The effects of two nanoclays, MgAl-layered double hydroxide and alkylammonium-modified montmorillonite, were studied on the mechanical properties of PVC nanocomposites. Dioctyl phthalate (DOP)-plasticized PVC …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 825–837 Read article
-
Marine Algal Microfiber and Agro-Waste Reinforced Crosslinked Polymer Composites for Sustainable Coastal Materials
Abstract: Crosslinked bio-polymer composites reinforced with marine algal microfibers and agro-waste fillers were fabricated and systematically characterized for sustainable coastal applications. Mechanical testing revealed that tensile strength increased from 18.5 MPa for neat polymer to 25.1 MPa at 20 wt.% reinforcement (~35% improvement), while the flexural modulus improved from 0.72 GPa to 1.02 GPa (~42% increase). Impact strength, however, decreased from 3.8 kJ/m² for neat polymer to 2.9 kJ/m² at 30 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 210–223 Read article
-
Comparative Thermal Stability of Structural Acrylic and Polyurethane Adhesives under High Heating Rate Conditions
Abstract: This study examines the thermal stability and degradation characteristics of structural acrylic and polyurethane adhesives through Differential Scanning Calorimetry (DSC) at an elevated heating rate of 15 °C/min. The purpose of this study is to assess the impact of rapid thermal excitation on the volatile loss of adhesives, their curing behaviour, and thermal decomposition profiles elements that are essential in high-speed manufacturing and thermally challenging settings. The findings indicated that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 717–725 Read article
-
Recent Developments in Hybrid and Nanostructured Basalt Fiber Composites: A Review of Mechanical and Processing Innovations
Abstract: This review delivers a critical analysis of recent advancements in basalt fiber-reinforced hybrid composites (BFRHCs), emphasizing their transformative potential for advanced structural and high-performance applications. Basalt fibers, derived from volcanic rock, exhibit superior tensile strength, excellent thermal stability, and chemical resistance, offering a sustainable and cost-effective alternative to conventional glass and carbon fibers. Hybridization of basalt fibers with synthetic (e.g., carbon, glass) and natural fibers (e.g., flax, hemp) results in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 885–894 Read article
-
Thermal Conductivity and Energy Storage Performance of Paraffin Wax-Based Composites Reinforced with Amine Functionalized Graphene as a Nanofiller
Abstract: In this study, amine-functionalized graphene (AFG) was employed as a nanofiller/nanomaterial to enhance the thermal and structural properties of a paraffin wax (PW)-based polymeric composite, formulated as a phase change material (PCM). The PW/AFG composite was synthesized with varying nanofiller volume fractions (0.20%, 0.40%, 0.80%, and 1.60%), and its thermal conductivity, stability, and energy storage performance were systematically analyzed. The incorporation of AFG into the polymer matrix significantly improved the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 355–374 Read article
-
Polymer-Nanowire Hybrid Composites Based on PEDOT: PSS and AgNWs for High-Performance Conductive Films in Flexible Devices
Abstract: The growing demand for flexible photovoltaic and wearable optoelectronic devices has intensified research into polymer-based conductive composites that provide transparency, flexibility, and electrical efficiency. In this work, we report the fabrication and characterization of a hybrid polymer nanocomposite electrode comprising silver nanowires (AgNWs) embedded within a PEDOT:PSS matrix, deposited on flexible polyethylene terephthalate (PET) substrates. The PEDOT:PSS polymer phase, modified with 5 vol% dimethyl sulfoxide (DMSO) and 0.1 vol% Zonyl …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 236–250 Read article
-
Photonic Polymer Composites for Light-Modulating Displays and High-Throughput Optical Data Transmission
Abstract: The combination of PMMA-based composites recently received substantial attention from the photonic applications field since these materials combine excellent optical transparency, mechanical flexibility and straightforward fabrication capabilities. The material performance of pure PMMA requires functional additives because it shows limited thermal properties and optical attenuation in addition to sensitivity against UV rays. The research explores developmental pathways for PMMA composites through combined use of nanoparticles and electro-optic polymers with dopants …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 838–860 Read article
-
Development of Self-Healing Circuit Boards Using Shape Memory Polymer Composites
Abstract: This study investigates the influence of temperature, humidity, and nanofiller type on the electrical and structural performance of advanced polymer nanocomposites for self-healing circuit applications. Particular attention was given to conductivity retention and the morphological behavior of carbon nanotubes (CNTs), graphene, and silver nanoparticles (AgNPs). Results show that conductivity decreased under elevated thermal–humidity conditions, reflecting the role of environmental stress in material degradation. Among the tested systems, AgNP-based composites achieved …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 746–770 Read article