SEM
69 articles · search the full text for this term
-
Functionally Graded Natural Fibre and SiC-reinforced Polymer Composite: Mechanical Properties
Abstract: Multifunctional materials, also called functionally graded materials (FGMs), are based on natural fibres or fillers and vary in composition and/or microstructure to control functional, structural, or thermal, properties. Functionally graded materials (FGMs) have been created for use in spacecraft, aircraft, and other engineering applications because they can withstand extremely high temperatures. Particle-reinforced FGMs, which make up the majority of FGMs, are made differently depending on their position. The mechanical and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 1–14 Read article
-
Performance Evaluation of H 2 SO 4 -Rice Husk-Moss Adsorbent for the Removal of Zn (II) Ion from the Effluent of Science Equipment Development Institute (SEDI)
Abstract: This research was carried out to investigate the potential of green algae (moss) with the support of H 2 SO 4 treated rice husk activated carbon using batch adsorption process for the removal of Zn (II) ions from SEDI industrial effluent. The rice husk- moss algae was activated using H 2 SO 4 . The effluent was characterized using atomic absorption spectrophotometer with initial concentration values of 12.3 mg/l for …
Published in Journal of Catalyst & Catalysis · Vol. 9, Issue 1, 2022 · pp. 6–15 Read article
-
Synthesis and Characterization of Al-Mg-Si Alloy based Hybrid Composite Reinforced with SiC and Graphite
Abstract: The present work is carried out to investigate the mechanical properties of Al-Mg-Si alloy matrix based hybrid metal matrix composites (MMCs) using stir casting method owing to its popularity and large scale productions. SiC and graphite reinforcements were added each with 1%, 2%, 3% and 4% respectively to fabricate four composites specimens. X-ray diffractometer and scanning electron microscope were used for phase identification and microstructure characterization (SEM). Density, hardness, compressive …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 9–19 Read article
-
Molebdate as Corrosion Inhibitor for Aluminium 356 In Acidic and Saline Media
Abstract: Corrosion processes are the cause of significant losses in industry. Organic, inorganic, and mixed material inhibitors have all been used to resist corrosion for a long time, but the environmental toxicity of organic corrosion inhibitors has driven a quest for inorganic corrosion inhibitors. The effect of molybdate as a new corrosion inhibitor on the corrosion of aluminium 356 in acidic and saline conditions was investigated using electrochemical and weight loss …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 1, 2022 · pp. 39–47 Read article
-
Investigating the Effect of Annealing Temperatures on SnO2 Nano Structural Thin Films and their Properties
Abstract: As deposited and two different annealing temperatures (500°C and 600°C) of Tin dioxide (SnO2) thin films are prepared on glass substrates by Chemical Bath Deposition (CBD) technique and subsequently their structural, morphological, optical and electrical properties are investigated and analyzed as a function of annealing temperature. It’s found that SnO2 films exhibit different nanostructures at different annealing temperatures. XRD analysis confirms that both deposited and annealed films are cubic structure …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 12, Issue 1, 2022 · pp. 28–39 Read article
-
Pharmaceutical Activity of Mirabilis Jalapa and its Biogenesis of Nanocrystals
Abstract: Bio friendly green modest synthesis of nanoparticles are the present research in nanotechnology. This study has been undertaken to explore the determinants of copper nanoparticles from 1 mM CuSO4 solution through profuse concentration of aqueous flower extract of Mirabilis jalapa reducing besides immobilizing agent. The attribute of copper nanoparticles was studied by using UV-VIS spectroscopy SEM and XRD. The XRD spectrum of the copper nanoparticles established the presence of elemental …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 12, Issue 3, 2025 · pp. 56–65 Read article
-
Mirabilis Jalapa Flower Extract as Natural Food Dye and Green Cellular Delivery of Nanoparticles
Abstract: Use of artificial colouring agents in sweets and packed food has become a common scenario now a day, which pose serious consequences in consumers especially children. Various studies around the globe reported the serious health hazards of artificial food dyes which include organ damage of liver, kidney and lungs thereby affecting metabolic enzymes, serum creatine and urea levels and brain damage resulting in neurotoxicity and even behavioural deficits in children. …
Published in Research & Reviews: A Journal of Drug Design & Discovery · Vol. 8, Issue 2, 2023 · pp. 27–34 Read article
-
Effect of concentration of Halloysite nanotubes on the Mechanical, Thermal and electrical properties of NBR/PP Elastomer nanocomposites
Abstract: Preparation of nanocomposites from immiscible polymer blends system has been investigated in this work. Natural clay named halloysite nanotubes are incorporated in the immiscible blend system using melt mixing process to prepare halloysite based nanocomposites comprising of PP/NBR blend system. FTIR studies have been carried out to establish the structure properties relationship. Nanocomposites are characterized by SEM for morphological studies. The thermal stability of nanocomposites has been evaluated by TGA …
Published in Journal of Polymer & Composites · Vol. 8, Issue 2, 2020 · pp. 62–67 Read article
-
Solar Energy Materials Synthesis and Characterization
Abstract: The studies on the structural, microstructure and composition of the MoSe2 films are discussed in this research work. It deals with the optical properties of pulse plated films of MoSe2. Very little information has been given in the literature concerning the deposition current efficiency using pulse plating. In agreement with pulse plating theory, according to reference, the limiting overall plating rate of materials generally does not exceed the values for …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 6, Issue 3, 2019 · pp. 24–37 Read article
-
Synthesis of Silver Nanoparticles from Pseuderanthemum malabaricum and Evaluation of Anticancer Activity
Abstract: The present study was focused on eco-friendly and green approach synthesis of silver nanoparticles using plant extracts of P. malabaricum. The morphological and physical properties of synthesized silver nanoparticles were analyzed using various spectroscopic and microscopic studies such as UV visible spectroscopy, FT-IR, XRD, SEM with EDAX, DLS, Zeta potential and Particle size analyzer. After structural characterization, the synthesized silver nanoparticles were subjected to anti-cancer activity studies against cervical cancer …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 21, Issue 2, 2019 · pp. 31–40 Read article
-
A Study of Macrostructure and Wear Behavior of AL7075-B4C MMC Using DoE Method
Abstract: Metal matrix composites are advanced materials produced by combining two or more constituents. In that the major phase called matrix alloy and the other is, generally, ceramic reinforcement. AA7075- B4C Composites are popular in automotive, aerospace and defense fields because of their high strength-to-weight ratio, wear resistance, etc. Present work is focused on the study of wear behavior of Aluminum 7075 Alloy with B4C composites prepared by using Stir Casting …
Published in Trends in Mechanical Engineering & Technology · Vol. 9, Issue 2, 2019 · pp. 25–32 Read article
-
Structural, Mechanical, Electrical and Magnetic Properties of Mn–Zn Substituted Ca-hexaferrites
Abstract: In the present investigation, the samples with chemical composition Ca(CoTi)0.5(MnZn)x/2Fe11–xO19 with (x = 0 to 1.0) have been synthesized using perfect stoichiometric proportions of reacting oxides by standard ceramic technique. The pellets of 15 mm diameter were prepared and sintered at 1313 K in air atmosphere for 106 h and characterized by using XRD and SEM. XRD studies of the samples showed hexagonal magnetoplumbite (M) structure with unit cell dimensions …
Published in Journal of Materials & Metallurgical Engineering · Vol. 1, Issue 1-3, 2011 · pp. 99–111 Read article
-
Synthesis and Characterization of Ta Doped Nanostructured PZT
Abstract: Lead Zirconate Titanate (PZT) powder of composition Pb(Zr0.65Ti0.35)O3 was modified by incorporation of Tantalum (Ta5+) in a wide composition range (5–25 at%) by chemical co-precipitation method using PbO, Zr2O3, TiO2 and Ta2O5. X-ray diffraction patterns of the samples showed the formation of a single phase and confirmed the formation of a rhombohedral phase of all the samples after sintering. SEM analysis showed well-developed, uniformly packed grains. Both the linear particle …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 2, 2013 · pp. 41–48 Read article
-
Effect of Softening Agents in the Thermal and Morphological Properties of Starch Based Bioplastics
Abstract: Plasticization of starch with 1,2,3-trihydroxy-propane (glycerol) as a softening agent (plasticiser) can replace the starch-starch bonds to starch-massive glycerol bonds, which offers stability, improved physicochemical and functional properties of starch. This study is an investigation on the thermal and morphological properties of bio plastic samples made of starch with varying plasticiser contents (8, 6.5, 5, 3.5 and 2 ml) and are evaluated by methods like thermogravimetric analysis (TGA), differential scanning …
Published in Journal of Polymer & Composites · Vol. 5, Issue 1, 2017 · pp. 15–24 Read article
-
Preparation and Charactrization of lead free piezoelectric ceramic/PVA polymer composites
Abstract: Sodium potassium niobate (Na0.5K0.5 NbO3 ) ceramic was prepared through conventional solid state reaction using AR grade NaNO3, KNO3 and Nb2O5 in stochiometric ratio. Poly vinyl alcohol (PVA) polymer - sodium potassium niobate composite films were prepared by solution casting method by changing the blend ratio of PVA / Na0.5K0.5NbO3. The prepared samples in the form of films were characterized by powder X-ray diffraction. The XRD studies revealed the presence …
Published in Journal of Polymer & Composites · Vol. 6, Issue 1, 2018 · pp. 1–8 Read article
-
Characterization of PANI-CNT Composite Flexible Dry Electrodes for Long-Term ECG
Abstract: Abstract Study of polymer dry electrodes in sensing biological signals has received attention as the nature of the polymer to bend that supports electrode’s contact and also avoids skin irritations and allergic reactions. As a polymeric substrate, we have used polyaniline (PANI) as it has very good conductivity, environmental stability, lower price and facile synthesis. Carbon nanotube (CNT) is added to the substrate to increase the overall electrical, magnetic, mechanical, …
Published in Recent Trends in Electronics Communication Systems · Vol. 3, Issue 3, 2016 · pp. 1–6 Read article
-
Influence of Dip Cycles on the Structural, Optical and Morphological Properties of CdS-SILAR Deposited Thin Films
Abstract: Cadmium sulphide (CdS) thin films were deposited on a glass substrate by a relatively simple and cost effective successive ionic layer adsorption and reaction (SILAR) method at temperature 80ºC at different deposition cycles. For a fine nanocrystalline thin film growth, the parameters include concentrations of cationic and ionic precursors, number of immersion cycles, and the immersion time. A study was made to know how dip cycles affects the structural, surface …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 6, Issue 3, 2016 · pp. 19–26 Read article
-
Characterization of Mn Dopped SrAlO Nano-Phosphors Prepared via Sol-Gel Method
Abstract: Strontium aluminate with Mn dopped phosphor was synthesized by Sol-Gel method using Strontium Acetate, Aluminium Acetate as raw material and 2-methoxyethanol as complexing agent. The transparent sol was preheated at 100°C for 2 h and then the precursor was finally annealed at 950°C for 2 h. The phosphor emits luminescence with peak wavelength at 395 nm and 520 nm under near-ultraviolet excitation at 360 nm. The morphology, composition and structure …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 6, Issue 3, 2016 · pp. 5–10 Read article
-
E-Commerce: A Review from the Context of Indian Market
Abstract: This paper bargains the reasonable information of web search tool promoting (SEM) or e-commerce, writing survey, present and future parts of e-business in Indian setting. This paper talked about the top spark components of shopping on the web. The present advancement would be a profitable expansion to analyst and academicians; and helpful hypothesis for specialists, sponsors, and business visionaries.Keywords: SEM, online marketing or e-commerce, pay-per-click (PPC)Cite this ArticleJain Vaibhav, Dhar …
Published in E-Commerce for Future & Trends · Vol. 3, Issue 2, 2016 · pp. 9–13 Read article
-
Preparation and Characterization of Lanthanum Doped Calcium Aluminate Nanophosphor (CaAl2O4: La) by Sol-Gel Method
Abstract: Abstract Lanthanum doped calcium aluminate nanophosphor (CaAl2O4: La) was prepared by sol-gel method. Characterizations such as XRD, SEM, EDAX and PL were done. Monoclinic structure was confirmed by the XRD analysis; the particle size was found to be 27 nm and is determined by (Williamson and Hall plot) W-H plot method. It shows that the particles were of small granular structure, and were interlinked with each other, lead to the …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 6, Issue 1, 2016 · pp. 24–28 Read article