Response Surface Methodology
17 articles · search the full text for this term
-
Effect of Different Configurations of Reinforcement and Post-Cure Temperature Detailed Survey
Abstract: Composites with natural fillers have applied many applications, such as interior housekeeping, building and so on but their findings are seldom examined in the mechanical, tribological and dynamic situation. The addition of fillers in GFRP composites enhances the mechanical, thermal and tribological properties due to filler occupied in voids in thermoset resin. There has also been a lot of work done in quantifying the consistency of the operating parameters through …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1738–1753 Read article
-
Strength Prediction and Optimization of Portland Limestone Cement Blended with Metakaolin and Rice Husk Ash
Abstract: This study explores the effects of Rice Husk Ash (RHA) and Metakaolin (MK) on the compressive strength of Portland Limestone Cement (PLC) mortar, aiming to promote sustainable construction materials. RHA and MK, derived from agricultural and industrial byproducts, serve as supplementary cementitious materials (SCMs) that offer environmental benefits and improve cement properties. Using response surface methodology (RSM) and central composite design (CCD), the research optimized the ternary blend of PLC, …
Published in International Journal of Minerals · Vol. 2, Issue 1, 2025 · pp. 1–14 Read article
-
Parametric Optimization of Biocompatible Ti6AL4V Alloy on Selective Laser Melting for Enhanced Structural Support and Reduced Stress Shielding
Abstract: The Selective Laser Melting technique is widely employed in the production of complexly shaped end products for a range of industries, including biomedical, aerospace, automotive, and defence. SLM is a complicated manufacturing process since a lot of factors influence the characteristics of the items that are printed using it. The SLM printing of fully dense parts is becoming more and more popular for various high-end applications. Because of their biocompatibility …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 143–156 Read article
-
Parametric optimization and validation of novel 3D scanning approach for sustainable manufacturing of patient-specific orthodontic retainers
Abstract: The purpose of the proposed study is to identify the ideal procedure parameters for 3D scanning a denture in order to produce customised orthodontic retainers that can be produced sustainably. However, pilot investigations rarely explore parameters like scanning angle, light intensity, or scanning distance. In order to lower acquisition error, the suggested study examines a method for forecasting the ideal values of the previously indicated scanning parameters. Based on the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 265–278 Read article
-
Influence of the Load, Sliding Speed, and Weight Fractions on Wear of a Hybrid Aluminium Metal Matrix Composite
Abstract: The vital focus of the research is intended in examining the aspect that impact the rate of wear for a hybrid aluminium metal matrix composite. The percentages of two reinforcements that are employed, the weight, and the sliding speed are the variables taken. The procedure entails employing the vortex-stir casting process to produce the hybrid composite. Utilizing a pin-on-disc apparatus, the fabricated composite materials are evaluated in compliance with the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 188–198 Read article
-
Exploring the Influence of SS 316L Nanoparticle Integration on the Flexural Strength of PMMA
Abstract: In the present study, a nano composite PMMA was prepared with the help of hot plate magnetic stirring and probe sonication at different loading conditions of nano sized reinforcement material SS 316L. In order to study the effect of independent factors (the amount of reinforcement material, stirring speed, and sonication time) on response variable (flexural strength), the central composite experimental design of response surface methodology (RSM) was utilized. The analysis …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 75–83 Read article
-
Parallel Conwip for a High-mix Multi-stage Production System with the entrance of rework
Abstract: In a complex production environment, more than one type of pull systems is often used to regulate the processesof different products. In literature, performance studies appertaining to multiple pull systems co-existed in aproduction environment are rare. The present paper evaluates the performances of parallel CONWIP (PC)systems in a high-mix production system with the entrance of rework. The production comprises three stages ofshared-machine facilities. Reject parts produced by the first stage …
Published in Journal of Production Research & Management · Vol. 1, Issue 1-2-3, 2011 · pp. 21–44 Read article
-
Optimization of Surface Roughness in Cylindrical Traverse Cut Grinding of Glass Fibre Reinforced Epoxy Composite
Abstract: Glass fibre reinforced plastic materials are increasingly used in many engineering applications. Making these materials with high level of dimensional accuracy and fine finish has increased enormously. Present work is planned to investigate the effects of grinding parameters infeed, longitudinal feed and work speed on surface roughness in traverse cut cylindrical grinding of glass fibre reinforced epoxy composite. Box-Behnken experimental design has been used to conduct the experimental runs. Analysis …
Published in Journal of Production Research & Management · Vol. 10, Issue 3, 2020 · pp. 27–33 Read article
-
Evaluation of process paramters of various materials by turning operation using different methodology techniques-A review
Abstract: The use of engineering materials has increased to a great extent in industries. So it is required to find the optimum parameters in order to have easy and economical machining. Turning operation is most important in the machining process. Especially of hard materials it is difficult sometimes to do so. For better results, the selection of proper process parameters is very important. This paper presents, the effect of process parameters …
Published in Trends in Mechanical Engineering & Technology · Vol. 10, Issue 3, 2020 · pp. 36–43 Read article
-
Enhancement of Lycopene Content in Tomato Pulp by the Addition of Tomato Peel Paste—Optimization and Utilization
Abstract: In tomato processing industry tomato peel is discarded as waste, it is rich in lycopene which is a phytochemical. This paper was focused on the utilization of tomato peel in tomato paste and optimization of the process using Response Surface Methodology (RSM). The levels of skin paste and pulp were taken as independent variables whereas lycopene content and Overall Acceptability (OAA) were taken as responses. Numerical optimization was used to …
Published in Research & Reviews : Journal of Food Science & Technology · Vol. 9, Issue 2, 2020 · pp. 31–37 Read article
-
Evaluation of Cholesterol Reduction in Probiotic Strain Lactobacillus brevis isolated from Human Fecal Sample by Using Surface Response Methodology
Abstract: Lactobacillus brevis, isolated from human feces was assessed for its in vitro cholesterol reduction ability. The effects of bile salts, inoculum size and contact time in simulated intestinal juice were studied. Central composite design model was utilised to determine the effects of interactions of significant variables on cholesterol reduction. By developing a linear regression model, as a function of growth associated variables in vitro cholesterol reduction was assessed. The results …
Published in Research and Reviews: A Journal of Microbiology and Virology · Vol. 9, Issue 1, 2019 · pp. 40–49 Read article
-
Optimization of Process Parameters for Isopropylation of Toluene over Modified Zeolite using Response Surface Methodology
Abstract: Vapor-phase isopropylation of toluene with isopropanol has been investigated in a fixed-bed flow reactor under atmospheric pressure using N2 carrier gas over Cerium modified 13X zeolite catalyst. The main product of this alkylation reaction was p-cymene followed by meta-isomer, while ortho-cymene was negligibly formed. Response surface methodology was used to study the combined effects of temperature, reactant molar ratio and space time on the conversion of toluene and selectivity of …
Published in Emerging Trends in Chemical Engineering · Vol. 1, Issue 1, 2014 · pp. 22–30 Read article
-
Continuous Column Study of Chromium (VI) Adsorption by Ion Exchange Resin
Abstract: The Indion GS300 anion exchange resin was trialed for its ability to remove chromium (VI) from synthetic wastewater by continuous column experiments. The ability of Indion GS300 to adsorb chromium (VI) in a fixed-bed column was analyzed. The effects of operating parameters such as flow rate and bed depth on the sorption characteristics of Indion GS300 were investigated. The total adsorbed quantities, equilibrium characteristics were related to the effluent volumes …
Published in Emerging Trends in Chemical Engineering · Vol. 1, Issue 2, 2014 · pp. 1–7 Read article
-
Parametric optimization of end milling operation on EN24 – A Mapping Review
Abstract: The milling of EN24 hardened steels has been applied in many cases in production. The purpose of this review is to study the effect of influence of milling operation parameters such as cutting speed, feed and depth of cut on the material removal rate and surface roughness in milling of EN24 steel. The effect of milling operation parameters are evaluated for minimum surface roughness and maximizing material removal rate. Maximum …
Published in Journal of Production Research & Management · Vol. 8, Issue 3, 2018 · pp. 42–48 Read article
-
Extraction and Characterization of Antioxidants from the Seeds of Ethiopian Avocado Variety, Pinkerton
Abstract: The objective of this study was to extract and characterize the antioxidants from the Ethiopian avocado seeds of the Pinkerton variety, using ethanol as a solvent. Response surface methodology (RSM) in combination with Box-Behnken experimental design with a three level, three-factor mixture design was used to optimize the extraction condition for assessing the maximum yield of antioxidant from the avocado seeds. Ethanol concentration (%, v/v), temperature (°C) and time (h) …
Published in Journal of Catalyst & Catalysis · Vol. 4, Issue 3, 2017 · pp. 49–56 Read article
-
Experimental Investigation of Combine Effect of Welding Speed, Tool Pin Profiles and Preheat Temperature on Mechanical Properties of Friction Stir Welded AA6061-T6 Joint based on Response Surface Methodology
Abstract: Two similar of dissimilar material can be joined by Friction stir welding (FSW) in solid state. Friction stir welded joint can be made by using non-consumable tool with rotary and transverse motion with intimate contact to material to be welded. These experimental investigations was carried out by taking different FSW parameters tool rotation speed, tool travel speed, tool pin profile and preheat temperature to find out its effect on mechanical …
Published in Trends in Machine design · Vol. 4, Issue 2, 2017 · pp. 15–24 Read article
-
Statistical Optimization of the Medium for the Production of α-Amylase by the Mutant Aspergillus flavus MS-12 Using Response Surface Methodology
Abstract: Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The present study is concerned with the improvement of Aspergillus flavus S-12 for α-amylase production. The mutant’s ability to produce α-amylase increased 1.24 times after …
Published in Research and Reviews: A Journal of Microbiology and Virology · Vol. 1, Issue 3, 2011 · pp. 13–23 Read article