Nanocomposite
31 articles · search the full text for this term
-
Synthesis of PANI/RGO/NiCrO Nanocomposite Material for Charge Storage Application
Abstract: PANI/RGO/NiCrO nanocomposite is synthesized by chemical oxidative polymerization of aniline and Nickel-Chromium Oxide (NiCrO). The prepared PANI/RGO/NiCrO nanocomposite exhibited high specific capacitance of 800 F/g at the scan rate of 5 mV/s, high power density of 1399.44 Wkg-1 and high energy density of 70 Whkg-1. The as-prepared polymer nanocomposites were characterized by X-ray diffraction (XRD) to study crystallinity, Fourier transform infrared spectroscopy (FTIR) to know the functional groups, Transmission electron …
Published in Journal of Polymer & Composites · Vol. 10, Issue 1, 2022 · pp. 89–99 Read article
-
Application of Polypyrrole/Lead Sulphide Nanocomposite in UV Light Assisted Photocatalysis and Gas Sensing
Abstract: The synthesis of ppy/lead sulphide nanocomposite was done using the co-precipitation method. The synthesized ppy/leadsulphide nanocomposite was characterized using Transmission Electron Microscopy (TEM), Selected Area Electron Diffraction (SAED), X-Ray Powder Defraction (XRD), Fourier Transformation Infra-Red Spectroscopy (FTIR), UV-Vis Spectroscopy techniques. The optical bandgap of the synthesized ppy/lead sulphide nanocomposite was observed to be 3.48 eV. The synthesized material is crystalline, with an average crystallite size of 2.51 nm. The photocatalytic …
Published in Journal of Polymer & Composites · Vol. 9, Issue 1, 2021 · pp. 13–27 Read article
-
Polymer Nanocomposite for Electronic Applications
Abstract: Polymer matrix nanocomposites are studied in this topic to understand commercial application in batteries, capacitor, sensing, radio frequency apparatus, antennas, non-resonant device, high quality filters, and solar cells. Act of substrate and fillers contribute interlinked electro-optic transduction ratio. Ceramic nano-composers are CuZnFe2O4, ZnO, and graphene oxide. Different polymerization techniques applied to produce compositions on conducting polymer. Polymer nanocomposites used to apply at electrochemical storage of energy. Bio-safe characteristics of biopolymer …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 22, Issue 3, 2020 · pp. 16–20 Read article
-
Modification of Ashaka and Tango Bentonites with Tetraphenyl Phosphonium and Hexadecyl Pyridinium Bromides for Possible Use in Polymer-Clay Nanocomposite Preparation
Abstract: Bentonites from Ashaka (GA) and Tango (GT) of Gombe State, Nigeria were surface modified with Tetraphenyl phosphonium (TPP) and Hexadecyl pyridinium bromides (HDP) by cation exchange method for their possible use in Clay/polymer nanocomposite preparation. The surfaces of the modified products were characterized by means of spectroscopic, diffraction and scanning methods [Fourier-transformed infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM)]. The basal spacing of the unmodified bentonite …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 22, Issue 2, 2020 · pp. 15–22 Read article
-
Cyclic Nanoindentation and Nano-scratch Behaviour of CaCO3/PMMA Nanocomposite
Abstract: The calcium carbonate surface modified with γ-methacryloxypropyltrimethoxysilane was carried out to prepare poly (methyl methacrylate) based composite. The grafting of PMMA increased as the weight ratio between MMA and n-CaCO3 increased, while the grafting efficiency of PMMA decreased. Transmission electron micrograph showed that MPTMS modified n-CaCO3 covered with PMMA was formed by emulsion polymerisation. The scratch resistance of n-CaCO3/PMMA nanocomposites are highly influenced by reinforcement’s type. The effects of n-CaCO3 …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 10, Issue 2, 2020 · pp. 25–36 Read article
-
Hybrid effect of nanoperlite and nanoclay on mechanical and rheological properties of low-density polyethylene
Abstract: The effect of two kinds of nanomaterials, nanoclay (NC) and nanoperlite (NP) was studied on morphological, rheological, mechanical and dynamic-mechanical properties of low-density poly ethylene (LDPE). It was found that hybrid nanofiller dispersion in LDPE depended on the type (hybrid or individual form) and in higher extent also on the amount of the nanofiller incorporated. Rheological results revealed that storage modulus and complex viscosity of hybrid nanofiller-filled LDPE nanocomposites increased …
Published in Journal of Polymer & Composites · Vol. 6, Issue 1, 2018 · pp. 32–41 Read article
-
The Effects of TiC Reinforcement on Thermal, Electrical and Dry Sliding Wear Behaviour of Aluminium Matrix Nanocomposites
Abstract: AbstractThe present work is to investigate the thermal, electrical and dry sliding wear behaviour of a aluminium matrix composite reinforced with dissimilar particle size (≤ 200 nm and 2 μm) of titanium carbide particles. An aluminium matrix composite with 0, 5, 10 and 15 vol.% TiC reinforcement was prepared by using powder metallurgy. A pin-on-disc apparatus was broadly used to investigate the wear behaviour of the Al/TiC nano composites. Wear …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 19, Issue 2, 2017 · pp. 28–41 Read article
-
Synthesis, Characterization and Applications of Poly (2-Methyl Aniline-co-2-Chloro Aniline) and Poly (2-Methyl Aniline-co-2-Chloro Aniline)-Nanocomposite-CuO
Abstract: The copolymer and its composite, poly (2-methyl aniline-co-2-chloro aniline) and poly (2-methyl aniline-co-2-chloro aniline)-nanocomposite-CuO respectively were synthesized by chemical oxidative polymerization method using ammonium persulphate as oxidant, sodium lauryl sulphate as surfactant and HCl as dopant. The synthesized copolymer and composite were characterized by FTIR, UV-Visible and 1H NMR spectroscopy. The thermal stability was determined by TGA/DTA. The copolymer and copolymer nanocomposite with CuO were found to be thermally more …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 7, Issue 3, 2016 · pp. 35–45 Read article
-
Synthesis of Photocatalytic Biomimetic Nanocomposite for Enhanced Water Purification
Abstract: Abstract Clean and drinkable water is a critical necessity for all human and economic developments; unfortunately, millions of people do not have access to potable water, resulting in the death of over two million children every year. Over the past decade, emphasis has been placed on the synthesis and design of photocatalytic nanocomposites to enhance the chemical degradation of organic pollutants as a cost effective vehicle for clean water production. …
Published in Journal of Water Pollution & Purification Research · Vol. 3, Issue 2, 2016 · pp. 1–16 Read article
-
Application of Bio-Nano Composite Photoelectric Material for the Therapeutic of Cardiac Disorder: An Integration of Bio-hybrid System
Abstract: For the treatment of fibrillation i.e. a cardiac disorder, wherein electrical currents are used as therapy. This disorder manifests chaotic and accelerated heart rhythm, preventing the pumping of blood to the rest the organism. In considering the remedy of this heart disease, in this study we devised therapeutics for the same through bio-nanocomposite photoelectric patches; by the application of direct immobilization of bacterial photosynthetic reaction center (RC) proteins on nanocrystalline …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 3, Issue 2, 2013 · pp. 1–7 Read article
-
Novel Modified Chitosan/Clay Nanocomposites with Antimicrobial Activity
Abstract: Unmodified sodium montmorillonite (Na-MMT) and montmorillonite modified by poly(methylmethacrylate) (PMMA) were used to intercalate chitosan (CS) and chitosan blended with polytertahydrofuran (CS-PTHF750). Their structures were characterized by XRD, TEM and IR techniques. The results showed that CS and CS-PTHF750 chains were inserted into silicate layers. The interlayer distance of the layered silicates in the nanocomposites enlarged as the amount of polymer increased. The thermal stability of the nanocomposites is characterized …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 4, Issue 2, 2013 · pp. 8–18 Read article