microstructure
26 articles · search the full text for this term
-
Ultrasonic Dispersion of Halloysite Nanotubes for Enhanced Mechanical, Thermal, and Morphological Performance of Epoxy Composites
Abstract: Halloysite nanotube (HNT)-reinforced epoxy nanocomposites were prepared by mixing HNT with bisphenol-A epoxy (LY 556) using ultrasonication, followed by compression molding. HNT contents of 0–5 wt.% were used. The composites were evaluated for tensile strength, flexural strength, Shore D hardness, Izod impact strength, and thermal stability using thermogravimetric analysis (TGA). The fractured tensile surfaces were also examined to understand the failure mechanism and interaction between HNT and the epoxy matrix. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Enhanced Mechanical Properties of AZ31 Magnesium Alloy Composite Reinforced with Carbon Nanotubes and Nano hydroxyapatite
Abstract: Magnesium alloys represent a novel category of biodegradable materials, offering numerous advantages in addressing the limitations associated with conventional biomedical materials. Magnesium-based metallic biomaterials offer a promising solution for fixing fractures, ensuring effective treatment without the inconvenience of subsequent implant removal procedures. In the present work, AZ31 Mg-alloy was chosen as the base material. Five specimens were meticulously fabricated, each varying in weight percentages of reinforcement materials: 0wt%, 0.5wt%, 1wt%, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 206–217 Read article
-
Mechanical and Thermal Performance of PETG Composites Reinforced with Short Carbon Fibers via Fused Filament Fabrication
Abstract: The study investigates the fabrication and characterization of polyethylene terephthalate glycol (PETG) composites reinforced with short carbon fibers (CF) using the fused filament fabrication (FFF) technique. Composite filaments with varying CF weight fractions (0, 5, 10, 15, and 20 wt%) were produced and evaluated for their mechanical, thermal, and morphological performance. The influence of CF reinforcement on tensile, flexural, and impact behavior was systematically examined, alongside thermal stability metrics including …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1219–1238 Read article
-
Investigation of the independent and combined roles of Gr and ZrO₂ on strengthening behaviour of Al-7075 Composites
Abstract: This study investigates the effect of individual and hybrid reinforcements on the mechanical and microstructural behaviour of Al7075 composite fabricated using the 2-step stir-casting technique. Four compositions were made with the base Al-7075, Al-7075 3 weight % ZrO2, and Al-7075 3 weight % Gr as well as a hybrid composite Al7075 with 3 wt.% Gr, 3 wt.% ZrO2. 2-step stir-casting was used to increase the wettability of the particles, decrease …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1060–1075 Read article
-
Sustainable High-Strength Geopolymer Composite Reinforced with Nano-Silica and Basalt Fibers: Mechanical and Microstructural Evaluation
Abstract: Sustainable soil composites (SSC) were formulated by incorporating red earth with varying proportions of bagasse ash (BA) and hydrated lime to enhance geotechnical performance and promote the reuse of agro-industrial waste. Red earth served as the primary structural matrix, BA functioned as a pozzolanic filler, and lime acted as a chemical stabilizer. BA content ranged from 0% to 60%, identifying 10% as the optimum level for significant improvement, and lime …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1113–1122 Read article
-
Kinetics of Crystallization and Microstructural Evolution of Commercial Fluorophlogopite Machinable Glass- Ceramics in the System SrO∙4MgO∙Al2O3∙ 6SiO2∙2MgF2 with Varying in B2O3
Abstract: Glass materials based on fluorophlogopite stoichiometry with varying concentrations of B₂O₃ were synthesized using the melt-casting method, followed by heat treatment at different crystallization temperatures. The resulting glass and glass–ceramic samples were characterized using differential thermal analysis (DTA), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FT-IR) spectroscopy. Kinetic analysis revealed that the activation energies required for the formation of glass–ceramics were 192.77 kJ mol⁻¹ and 210.47 kJ …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 1–16 Read article
-
Comparative Analysis of Pond Ash as a Partial Replacement of Sand as Subbase Material for Concrete Paver Block Hardstand sustaining storage of Bulk Cargo
Abstract: This work presents an industrial waste-derived subbase material that can take the place of conventional granular material for subbase in hardstand foundation construction. This industrial waste hugely deposited in the ash lagoons namely Pond Ash (PA) which is globally generated at an amount of 780 Metric Tons from thermal power plants annually ,as foundation material for hardstand construction, will not only help the cause of residual waste disposal problems but …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 3, 2025 · pp. 32–45 Read article
-
Investigation and Optimization of Resistance Spot Welding Parameters for Stainless Steel
Abstract: The present work examines the significant impact of resistance spot welding (RSW) process parameters on the properties and efficacy of connections created in sheets of 316L stainless steel. This study examines the intricate relationship between welding parameters, investigating their influence on the microstructure, mechanical characteristics, and overall efficacy of welded connections. By employing a methodical experimental methodology, this study thoroughly investigates the impact of different factors in resistance spot welding …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 3, 2025 · pp. 15–21 Read article
-
Optical Image Sensing and Analysis of Iron Ore Pellets: A Machine Learning Approach
Abstract: The present work is aimed to improve quality control in steel production using SEM imaging and machine learning. High-resolution SEM images of iron ore pellets, primarily composed of hematite and magnetite, are analyzed to understand their microstructural features, which significantly impact pellet performance during reduction processes. Traditional microstructure analysis is manual, time- consuming, and prone to inconsistencies. This study proposes an automated approach using K-Means Clustering, Canny Edge Detection, DBSCAN, …
Published in Journal of Instrumentation Technology & Innovations · Vol. 15, Issue 3, 2025 · pp. 7–18 Read article
-
Process Parameters Optimization of Fiber Laser Cladded SS316 Surface Using RSM Analysis
Abstract: This paper presents the laser cladding experiments on the surface of SS316 to study the variations in process parameters, such as scanning speed (100-250 mm/min), laser power (50-250 W), and % volume of B4C (5- 25%) + SS316 powder on the mechanical, metallurgical and tribological performance of the modified surface. A central composite design (CCD) was used to develop the response surface methodology (RSM) to design the experiments and for …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 186–201 Read article
-
A Review on Characterization of Mechanical Behavior of AA5083 Through Equal Channel Angular Pressing at Different Channel Angles
Abstract: Materials that have been enhanced through traditional techniques like strain hardening, the addition of solutes, altering grain size through precipitation and refining are commonly utilized in industrial applications. However, there is a restriction on the extent of deformation that these traditional techniques can impose on a material. This research centered on examining the primary mechanical characteristics of aluminum alloys when polycrystalline materials incorporate an extremely fine grain size. By producing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 54–68 Read article
-
Electrodeposition and Magnetron Sputtering of Rhenium Coatings on Carbon-Carbon Composites for Enhanced Corrosion Resistance and Structural Integrity
Abstract: It is well known that tailored materials are gaining in-roads to aviation and other manufacturing industries where stringent requirements are to be met, due to high temperature erosion, which is a problem. In order to counter these issues, materials which can resist a very high temperature are to be sought. One of the several methods to combat this high temperature issue is to provide a metallic refractory material coating on …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 35–44 Read article
-
Microstructure Analysis and Material Properties of Weld Slag as Fine Aggregate in Concrete
Abstract: To reduce the amount of river sand used, researchers and engineers have developed their own solutions. The well-known technique of submerged-arc welding can create high-quality welds in a variety of thicknesses for ferrous, stainless, and even some non-ferrous metals. The procedure involves an electric current flowing constantly between a welding wire and the work piece, creating an arc. In submerged arc welding, the shielding flux is transformed into slag during …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 13–18 Read article
-
Enhancing The Mechanical Performance of Al6061/Graphite Composites Reinforced with Sic and Aluminium Oxide Processed by Stir Casting
Abstract: The study investigates the mechanical properties of aluminum alloy Al6061 reinforced with varying proportions of silicon carbide (SiC) (0 wt%, 4 wt%, 5 wt%, and 6 wt%) and aluminum oxide (Al₂O₃) (0 wt%, 4 wt%, 3 wt%, and 2 wt%), with a constant addition of 1 wt% graphite. The composites were fabricated using the stir casting process, an efficient and economical method for uniformly distributing ceramic reinforcements within the metal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 66–74 Read article
-
Influence of Die Design Parameters and Mechanical Properties of AA5083 Through Equal Channel Angular Pressing Technique
Abstract: Refinement of the grain structure in bulk Materials is achieved using the Equal Channel Angular Pressing process. The material is pass through a die in this procedure that has two channels that meet at a particular angle. Finer grains are formed as a result of the material's deformation when it passes through die. The creation of ultra-fine grains is influenced by a number of die design characteristics. The effects of …
Published in International Journal of Manufacturing and Production Engineering · Vol. 2, Issue 2, 2024 · pp. 33–47 Read article
-
A Review on The Role of Nanoparticles in Modifying Mg Alloys and Composites
Abstract: Reviewing and assessing magnesium's uses in the automobile sector, which have the potential to greatly improve fuel efficiency and environmental preservation, is the goal of this study. The report provides an overview of magnesium alloys' present benefits, drawbacks, technological obstacles, and future prospects in the automobile sector. The development of magnesium matrix composites has advanced to a new level thanks to the magnesium matrix nanocomposites' exceptional mechanical qualities. Dispersing nanoparticles …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 1, 2024 · pp. 24–32 Read article
-
Enhancing Machinability in the Heat Treatment of Inconel 718: A Comprehensive Review
Abstract: The increasing need for materials with high strength and heat resistance, particularly in aerospace applications, creates machining issues. These materials are generally difficult to machine because to their strong wear resistance, abrasion resistance, and low heat conductivity. This produces strong cutting forces and temperatures, resulting in a limited tool life. variances in the microstructures of various materials can induce variations in machinability due to variances in chemical composition, casting, forging …
Published in International Journal of Energy and Thermal Applications · Vol. 2, Issue 1, 2024 · pp. 9–20 Read article
-
Microstructural and Mechanical responses of Al6061 alloy matrix composite reinforced with yttria particles
Abstract: The increasing need for materials that can improve the overall performance of automotive and aerospace components has driven the development of composite materials. Aluminium Metal Matrix Composites (AMMC) have become a popular alternative due to their ability to satisfy the changing needs of industries. This study investigates the mechanical characteristics of AMMC (Aluminium Matrix Metal Composite) made using the stir casting method. The study examines the effects of different amounts …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 246–252 Read article
-
Progressive Developments in Cold Metal Transfer Welding Technique: A Review and Trends
Abstract: This comprehensive review paper examines the Cold Metal Transfer (CMT) welding process and its wide- ranging applications across various industries. With a focus on elucidating the fundamental principles, process characteristics, and recent advancements, the paper offers a comprehensive overview of CMT welding's versatility and effectiveness. The review delves into the intricate mechanics of the CMT welding process, highlighting its unique metal transfer modes like CMT-P, CMT advanced, CMT pulse rose, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 235–245 Read article
-
An overview of dissimilar metals welding by cold metal transfer technique
Abstract: Cold Metal Transfer (CMT) welding has emerged as a promising technique for joining dissimilar materials, offering enhanced weld quality and mechanical properties. This review article explores the application of CMT welding in joining different metal alloys, focusing on two significant cases: magnesium-aluminium and aluminium-stainless steel combinations. CMT welding minimizes intermetallic compound formation and produces high-strength joints in magnesium-aluminium combinations. CMT welding with a friction-surfaced aluminum coating offers strong metallurgical bonding …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 167–174 Read article