Mechanical properties
199 articles · search the full text for this term
-
Microstructural Evolution and Mechanical Performance of Ambient-Cured Fly Ash–Metakaolin Inorganic Polymer Composites Activated by Anhydrous Sodium Silicate Powder
Abstract: Inorganic geopolymer networks offer a low-carbon and sustainable solution to traditional binder systems through the alkali-activation of industrials-grade aluminosilicate material. The present paper focuses on the microstructure development and the mechanical performance of the ambient-cured fly ash – metakaolin inorganic polymer composite activated with solid anhydrous sodium silicate powder. Five inorganic polymer binder combinations were formulated by replacing fly ash with metakaolin at mass fractions of 0%, 10%, 20%, 30%, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Investigation of Areca Stem and Banana Stem fibre Hybrid Composites for Improved Strength and Sustainable Applications
Abstract: Research on natural fibre reinforced polymer composites as eco-friendly substitutes for traditional synthetic composites has intensified due to growing need for sustainable engineering materials. This work used the Taguchi L9 orthogonal array to experimentally examine and optimize the mechanical behaviour of hybrid epoxy composites reinforced with areca and banana fibres. The impacts of epoxy matrix composition, areca and banana fibre content on the composite’s tensile strength, impact strength, flexural strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Artificial Intelligence-Based Optimization of Mechanical and Biocompatible Properties in Polymer Composite Implants
Abstract: Artificial Intelligence (AI) has already become a ground-breaking tool of streamlining polymer composite implants to enhance both mechanical strength and biocompatibility simultaneously. This paper recommend an AI-based multi-objective optimization model, which integrates the selection of materials, structural modelling, and biological evaluation. The in vitro biocompatibility indicators, including cytotoxicity and cell adhesion, can be used to model mechanical behavior, e.g. stress-strain behavior and fatigue behavior. To arrive at an optimal material …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Effects of Fiber Hybridization on Tensile, Flexural, and Impact Strength of Hybrid Natural Fiber Epoxy Composites
Abstract: This study investigates the mechanical performance of epoxy composites reinforced with hemp, ramie, and flax fibers and evaluates the effect of fiber hybridization. Single-fiber composites were fabricated using hand lay-up followed by vacuum-bagging consolidation and compared with three hybrid systems: hemp–flax (HF), hemp–ramie (HR), and flax–ramie (FR). Tensile, flexural, and drop-weight impact properties were evaluated using standardized test procedures. Among the single-fiber composites, flax exhibited the highest tensile strength of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 295–305 Read article
-
Comprehensive Study on the Mechanical and Tribological Response of Waste Tyre Rubber–Natural Fiber Hybrid Epoxy Composites
Abstract: Research into the mechanical and tribological characteristics of Prosopis juliflora-fiber reinforced epoxy-matrix composites with recycled tyre rubber particles is the focus of this investigation. Making use of old tire rubber and bio-reinforcing with fibers from the common invasive plant Prosopis juliflora are the goals of the two-reinforcement techniques. The end goal is to produce long-lasting, cost-effective engineered composite materials with improved performance. A constant epoxy resin matrix was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 154–161 Read article
-
The Effect of Welding Parameters and Tool Geometry on Mechanical Properties of RZ5-10 wt% TiC FSW Joint
Abstract: Friction Stir Welding (FSW) of metal matrix composite (MMC) provides the grain refinement and reinforcement redistribution of the composite used for wide application in aerospace and structural. This wide application needs development of best-suited joining process for MMC which is complicated to unite by the traditional welding process. The paper observed the consequence of the welding parameters and tools’ geometry on the mechanical properties of the friction stir butt welded …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 81–94 Read article
-
Tensile and Flexural Strength Quantification of Basalt-Reinforced Epoxy Composites Fabricated via Vacuum-Assisted Resin Transfer Molding at Varied Fiber Volume Fractions Description
Abstract: Fiber-reinforced polymer composites have been identified to possess excellent properties that render them very suitable in the aerospace, automotive, marine and renewable energy sectors. However, for the industrially scalable vacuum-assisted resin transfer molding (VARTM) process, optimization of mechanical properties of basalt epoxy composites must be achieved systematically, which means that the effect of the fiber volume fraction (VF) on the mechanical properties of the composite needs to be quantified for …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 43–57 Read article
-
Hybrid Polymer Composites Reinforced with Coconut Shell Fillers and Silica Fume: Synergistic Effects of Industrial By-Products: A Comprehensive Review
Abstract: The increasing requirement of sustainable and high-performance engineering materials has led to increased research in hybrid polymer composites comprising sustainable fillers in the form of renewable biomass or industrial by-products. Among the various bio-fillers that exist, coconut shell filler is gaining much prominence due to its low density, high content of lignin, hardness, and abundance as agricultural waste. Another industrial by-product that is rich in amorphous silica and possesses high …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1296–1307 Read article
-
Performance Evaluation of Kevlar-Sisal-S-Glass Hybrid Composites with Ceramic Fillers for Structural Applications
Abstract: This study examines the mechanical properties of hybrid composite laminates reinforced with Kevlar, sisal, and S-glass fibers, and incorporating ceramic fillers—silicon carbide (SiC) and aluminum oxide (Al2O3)—within an epoxy matrix. The hand lay-up method was utilized to produce the laminates, ensuring a uniform fiber stacking sequence and including 10% filler material. Two composite variations were synthesized: one incorporating SiC and the other Al₂O₃, and both underwent tensile, flexural, hardness, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1308–1322 Read article
-
Recent Developments in Polymer Concrete: Considerations for Materials, Performance, and Sustainability
Abstract: In modern infrastructure Growing need of durability and environmental has driven interest in polymer concrete (PC) as an alternative to conventional cement-based materials. This review critically evaluates recent developments in polymer concrete with emphasis on material innovations, performance characteristics, and sustainability aspects. Demonstration of Advanced polymer binders (e.g. epoxy, polyester and vinyl ester resins) shown significant improvements in mechanical strength, adhesion and chemical resistance. Investigation indicates that use of nanomaterials …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 910–920 Read article
-
Investigating the Mechanical Properties and Microstructure of AA 7074 Composites with Silicon Nitride Reinforcement
Abstract: This study investigates the mechanical and microstructural properties of AA 7074 aluminium alloy reinforced with 1%, 3%, and 5% by weight of silicon nitride (Si₃N₄), fabricated via the stir casting method, intended for structural aerospace applications. A thorough series of mechanical tests—comprising tensile, compression, hardness, impact, flexural, and wear tests—was performed to assess the influence of differing reinforcing content. The composite containing 5 wt% Si₃N₄ (SN5) demonstrated the most pronounced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 268–281 Read article
-
Modelling -Based Evaluation of Hybrid Natural Synthetic Fiber Polymer Composites for Sustainable Energy Applications
Abstract: The growing need of lightweight, high-performance, and green energy system materials has increased the research on hybrid polymer composites. This paper gives a modelling-based evaluation of polymer matrix composites which are reinforced using natural fibers like jute, sisal, bamboo in a combination with synthetic glass fibers to be used in sustainable energy sources. An analytical model has been used to assess the effect of hybrid fiber composition on mechanical, thermal, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 682–688 Read article
-
Effect of Barium Sulphate on Mechanical Properties of Woven Aloe Vera/Flax Reinforced Epoxy Composites
Abstract: Natural fiber-reinforced composites are becoming popular because of their lightweight, eco-friendly, and sustainable nature. Nevertheless, single-fiber composites tend to exhibit poor mechanical performance. This research paper has created a hybrid composite bonded with woven Aloe vera and flax reinforced with an epoxy bond. Barium sulphate (BaSO4) filler was added to further improve the properties. The fibers were subjected to sodium hydroxide (NaOH) to enhance bonding with the matrix and the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 355–365 Read article
-
Fabrication and Mechanical Characterization of Hybrid Natural Fiber Reinforced Composites using Ferromagnetic and Graphite Fillers
Abstract: The past few years have seen a lot of interest in the creation of hybrid natural fiber composites because of their lightweight properties, environmental friendliness and their potential use in structures. The hybrid composite laminates in the current study were produced by the hand lay-up process by blending the natural fibers with the functional filler materials. Three types of composite structures were created and these are Natural Composite Material (NCM), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 498–511 Read article
-
Structure-Property Correlation in PTT/PP Blends with Improved Mechanical Performance
Abstract: The present work investigates a series of poly (trimethylene terephthalate) (PTT)/polypropylene (PP) blends prepared with varying PP concentrations in order to improve the overall performance of PTT, particularly with respect to mechanical properties and processability. PTT is a promising engineering thermoplastic owing to its balanced stiffness, resilience, and chemical resistance; however, its relatively high cost and processing limitations often restrict its wider application. In this context, blending with PP offers …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 90–98 Read article
-
Comprehensive Performance Assessment of Silane-Treated Bio-Extracted Husk Fiber Reinforced Composites for Sustainable Construction Applications
Abstract: This research project is an extensive experimental study on bio-extracted husk fiber polymer composites with a focus on silane surface treatment. Bio-extracted rice husk fibers underwent an alkali-enzymatic hybrid extraction process followed by a 3-aminopropyltriethoxysilane (APTES) treatment for improved interfacial adhesion and matrix compatibility. Resin composites with treated and untreated fibers were fabricated with a weight ratio of 10%, 20%, and 30% via hand lay-up methods. A battery of mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 229–241 Read article
-
Hybrid Polymer Composites Containing GGBS and Copper Slag: A Review of Mechanical Behavior and Interfacial Mechanisms
Abstract: Over the past few years, there has been a push to seek sustainable solutions through material science in the field of industrial by-products that can be used in polymer composite systems. Two such substances are ground granulated blast furnace slag (GGBS) and copper slag that have demonstrated a promising potential because of their abundance and useful physical and chemical properties.This review is dedicated to the application of GGBS and copper …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 43–50 Read article
-
Mechanical and Functional Performance of PET–Kenaf Fiber Hybrid Composites for Domestic Household Applications
Abstract: This research presents a hybrid composite of recycled polyethylene terephthalate (PET) and Kenaf fibers for sustainable household applications. Polyethylene terephthalate from consumer bottles was reinforced with Kenaf fibers at volume fractions of 10–30% and composites were created through compression molding. Mechanical characterization involved tensile, flexural, impact, and hardness testing where appropriate and was standardized according to ASTM standards, while their interfacial interactions were characterized by imaging through SEM. Linear and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1482–1498 Read article
-
Design and Synthesis of Functionalized Copolymers for Enhanced Interfacial Compatibility in Polymer Matrix Composites
Abstract: Interfacial adhesion between the polymer matrix reinforcing phase affects significantly the mechanical and thermal behavior of polymer composites. The study reports on the design and synthesis of functionalized copolymers in the efforts to establish interfacial compatibility based on chemical design. The reinforcements were functionalized doping polar functional groups such as glycidyl methacrylate and maleic anhydride during free-radical copolymerization to form copolymerizing reactive sites that interacted with the reinforcement surfaces. Confirmation …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1404–1418 Read article
-
Sustainable Development of Carbon–Sisal Reinforced Polyester Composites through Green Nanotechnology
Abstract: This study presents the sustainable development of carbon–sisal fiber reinforced polyester composites enhanced through green nanotechnology for improved mechanical performance and environmental compatibility. The hybrid composites were fabricated using varying fiber ratios - C1 (70% carbon, 30% sisal), C2 (60% carbon, 40% sisal), and C3 (50% carbon, 50% sisal) - with an optimized addition of 1 wt.% nano-silica (SiO2) synthesized via a green sol–gel route. The tensile, flexural, and impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1179–1194 Read article