Hardness
61 articles · search the full text for this term
-
Cyclic Nanoindentation and Nano-scratch Behaviour of CaCO3/PMMA Nanocomposite
Abstract: The calcium carbonate surface modified with γ-methacryloxypropyltrimethoxysilane was carried out to prepare poly (methyl methacrylate) based composite. The grafting of PMMA increased as the weight ratio between MMA and n-CaCO3 increased, while the grafting efficiency of PMMA decreased. Transmission electron micrograph showed that MPTMS modified n-CaCO3 covered with PMMA was formed by emulsion polymerisation. The scratch resistance of n-CaCO3/PMMA nanocomposites are highly influenced by reinforcement’s type. The effects of n-CaCO3 …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 10, Issue 2, 2020 · pp. 25–36 Read article
-
Effect of Shock Waves on the Hardness of Graphene Reinforced Aluminium Composites
Abstract: The advantageous properties of Aluminium metal components have proved their suitability in the field of aerospace industry, naval, sports, and other structural applications. Its disadvantages like high wear rate, less hardness limits its application for some special applications. Graphene is an allotropic form of carbon which exhibits high tensile strength, better co-efficient of friction and an easily derivable material from the carbon which is abundantly available in nature. Reinforcement of …
Published in Journal of Polymer & Composites · Vol. 8, Issue 1, 2020 · pp. 32–38 Read article
-
Studies on Mechanical Properties of Ultra High Molecular Weight Poly Ethylene (UHMWPE)-Basalt Fiber Reinforced Hybrid Polymer Matrix Composites
Abstract: Composite materials have become a preferred material now days because of their strength and also they are light. An additional material can be produced by a combination of matrix and reinforcement. The connections also give the flexibility of the design, because many of them can be formed in complex shapes. The economic significance of composite materials is now illustrious. There is strong indication far and wide that this importance will …
Published in Journal of Polymer & Composites · Vol. 7, Issue 3, 2019 · pp. 8–19 Read article
-
Studies on Nanostructured Nickel Thin Film Coatings Deposited using Pulsed DC Magnetron Sputtering Process
Abstract: The purpose of this research work is to investigate the mechanical properties of nickel thin film. The nickel thin films were coated on glass substrate using pulse PDC power supply magnetron sputtering process in argon atmosphere. The effect of substrate temperature, effect of duty cycle and mechanical properties of nickel thinfilms has been presented in this paper. Coating deposited with substrate temperature at 250°C, had lower surface roughness (Ra<3 nm) …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 2, Issue 1, 2015 · pp. 8–14 Read article
-
An Overview: Design of Nanocomposite Coatings
Abstract: The call for high productivity, quality in machined surfaces, and reduced machining costs have put a demand on the improved cutting tools. The recent advancements in development of nanocomposite coatings which consist of crystalline and amorphous phase have made dry machining at high speeds with quality in machined parts a reality. The driving force behind the super hard structure of such coatings is phase segregation mechanism. In this work, a …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 2, Issue 3, 2015 · pp. 1–4 Read article
-
Effects of Weight Fractions on Properties of Aluminium-Fly Ash Metal Matrix Composites
Abstract: With particles of fly ash as the particulate addition, the properties of pure Al can be greatly improved. The incorporation of fly ash brings significant changes in some of its core properties like hardness, density, stiffness, strength, wear resistance. A comparison of the mechanical properties of pure Al have been done with three sets of Al-fly ash composites containing 6, 8 and 10% by weight fly ash which are manufactured …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 3, 2016 · pp. 44–48 Read article
-
Establishing Empirical Relationships to Predict Grain Size and Hardness of Pulsed Current Microplasma Arc Welded Inconel 625 Sheets
Abstract: Nickel alloys have gathered wide acceptance in the fabrication of components, which require high temperature resistance and corrosion resistance, such as metallic bellows used in expansion joints in aircraft, aerospace and petroleum industry. In case of single pass welding of thinner sections of this alloy, pulsed current microplasma arc welding was found beneficial due to its advantages over the conventional continuous current process. The paper focuses on developing mathematical models …
Published in Journal of Materials & Metallurgical Engineering · Vol. 1, Issue 1-3, 2011 · pp. 37–47 Read article
-
Surface Characterization of Heat Treated Tool Steel after W-EDM
Abstract: In order to meet the increasing demands of performance and reliability of sophisticated components, quality of a machined surface plays an important role. In this research paper, it has been tried to investigate the effect of heat treatment on the surface quality of AISI D2 tool steel after Wire-Electro Discharge Machining (W-EDM). The test specimens were prepared by milling and then carrying out hardening and tempering in different ways and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 178–184 Read article
-
Effect of Alloying Elements and Processing Parameters on Mechanical Properties of Austempered Ductile Iron
Abstract: In the present work, austempering is carried out for three different grades (Unalloyed, copper alloyed and Nickel alloyed) of ductile iron. After that the variation of mechanical properties (Hardness, Tensile strength and Elongation) and microstructure of the austempered ductile iron (ADI) with alloying elements (Copper and Nickel) and austempering process variables (austempering temperature and austempering time) were studied. It is found that, with increasing austempering time hardness, tensile strength and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 1, 2013 · pp. 8–16 Read article
-
EFFECT OF Scandium and Zirconium ADDITIONS ON HARDNESS AND CORROSION RESISTANCE OF AA5083 Alloy
Abstract: This study investigates the hardness and corrosion resistance of modified AA5083. Stir casting with cold rolled condition was applied to prepare the four compositions, namely AA5083 alloy, modified AA5083 alloy with 0.2wt.%Sc-0.1wt.%Zr, modified AA5083 alloy with 0.4wt.%Sc-0.1wt.%Zr alloy, and modified AA5083 alloy with 0.6wt.%Sc-0.1wt.%Zr alloy. Alloying with Sc-Zr has a strong influence on the hardness of AA5083 alloy and corrosion resistance.
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 1, 2019 · pp. 1–8 Read article
-
An Experimental Study on the Effect of Tensile Properties and Hardness of AA6082-T6 under the Heat Treatment Conditions
Abstract: AbstractIn the present study, the experiments were performed to investigate the effect of heat treatment parameters viz. soaking time and temperature on the tensile properties and hardness of Aluminium alloy (AA) 6082-T6 sheet. The sheet was heat treated and cut the standard tensile specimen ASTM E8M-04tofind out the tensile properties and hardness value at different temperature with respect to different soaking time. Air circulation oven type electric furnace was used …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 3, 2018 · pp. 36–41 Read article
-
EXPERIMENTAL ANALYSIS OF STEELS ON HARDNESS IN ELECTRICAL DISCHARGE MACHINING
Abstract: Electrical Discharge Machining (EDM) is one of the most extensively used non-conventional machining processes. It uses thermal energy to machine all electrically conductive materials of any toughness and hardness for manufacturing of dies, aerospace parts. Since there is no direct contact between workpiece and tool electrode in EDM. Work material hardness is not a hurdle in machining by EDM, which is principally useful for machining of die profiles/ contours.This paper …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 2, 2018 · pp. 1–5 Read article
-
EXPERIMENTAL INVESTIGATION OF WELDING PROCESS PARAMETERS ON MECHANICAL PROPERTIES FOR TIG WELDED AUSTENITIC STAINLESS STELL 304 JOINTS
Abstract: Minimally invasive surgeries are the most elusive, yet highly demanded subset of surgeries which requires precise knowledge of the pertinent patient. Compared to conventional surgeries, minimally invasive surgeries are characterized by less pain, low risk of infection, lesser scarring, etc. In the status quo, doctors use intuition through experience to determine the parameters for surgery such as the force required to cut, size of cut, depth of cut, etc. With …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 2, 2018 · pp. 6–9 Read article
-
Study of Shear Strength and Hardness of Resistance Spot Welding for Automotive Applications
Abstract: Resistance spot welding is the most popular process used in automotive and aerospace for joining of sheet metals of different thicknesses, shapes, and materials. There has been already much research done on the resistance spot welding. This review paper gives an overview of the performance of resistance spot welds in an automobile. For this, AWS D8.9M:2012 (Test Methods for Evaluating the resistance spot welding behaviour for automotive steel sheet materials) …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 3, 2017 · pp. 1–9 Read article
-
INFLUENCE OF HEAT TREATMENT ON MECHANICAL PROPERTIES OF MILD STEEL
Abstract: . In manufacturing and metallurgical industries, the metal is heated above the critical temperature in which micro-structural transformation has been take place, to change the desirable microstructure and mechanical properties such as tensile strength, hardness, toughness, fatigue strength etc. The physical properties have been obtain through heat treatment mainly depends upon the heating temperature, rate of heating and the cooling medium. Some of the widely used cooling mediums are air, …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 5, Issue 1, 2018 · pp. 25–30 Read article
-
A STUDY ON MECHANICAL PROPERTIES OF ALUMINIUM-4.5%COPPER ALLOY METAL MATRIX COMPOSITES REINFORCED WITH ALUMINA FIBERS USING SQUEEZE CASTING PROCESS
Abstract: Aim of the present investigation is to develop aluminium-4.5% copper alloy metal matrix composites by reinforcing with chopped alumina fibers in varying percentage like 10%, 20% and 30% and so on. The casting can be produced by using Squeeze casting process; these castings were studied for all its mechanical properties like tensile, hardness, wear and microstructure and corrosion analysis. It is observed that increase in reinforcement improves the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 6, Issue 1, 2018 · pp. 22–31 Read article
-
Experimental Investigation of Combine Effect of Welding Speed, Tool Pin Profiles and Preheat Temperature on Mechanical Properties of Friction Stir Welded AA6061-T6 Joint based on Response Surface Methodology
Abstract: Two similar of dissimilar material can be joined by Friction stir welding (FSW) in solid state. Friction stir welded joint can be made by using non-consumable tool with rotary and transverse motion with intimate contact to material to be welded. These experimental investigations was carried out by taking different FSW parameters tool rotation speed, tool travel speed, tool pin profile and preheat temperature to find out its effect on mechanical …
Published in Trends in Machine design · Vol. 4, Issue 2, 2017 · pp. 15–24 Read article
-
Investigating the Effect of Inoculation on Microstructure of IS: 210 in Casting of Bracket: A Review
Abstract: The objective of present investigation is to review the effect of the inoculants on the microstructure of grey cast iron. Effects of the inoculants were investigated through metallurgical analysis of the matrix microstructure and the mechanical properties of the castbracket. Effect of silicon carbide and ferro-silicon at different temperature and at different weight percentage on grey cast iron is investigated. The results show that both, the SiC and the conventional …
Published in Trends in Mechanical Engineering & Technology · Vol. 7, Issue 1, 2017 · pp. 47–51 Read article
-
Influence of Process Parameters of TIG Welding Process on Mechanical Properties of SS304L Welded Joint: A Review
Abstract: The purpose of this study is to study the effects of various process parameters (welding current, filler materials and groove design) of tungsten inert gas welding (TIG) on aspect ratio, hardness and impact strength of SS304L welded joint. Aspect ratios are obtained by taking the ratio of bead width and bead penetration. This bead dimensions can be measured by digital vernier calipers. Weld joint quality depends on the bead dimensions. …
Published in Trends in Mechanical Engineering & Technology · Vol. 6, Issue 2, 2016 · pp. 11–17 Read article
-
Reduction of Hydrogen Embrittlement of HSLA Steel by Ion Implantation Surface Modification Technique
Abstract: There are many techniques available for the surface modification of the substrate. One of the important ion implantation techniques is plasma source ion implantation (PSII). Ion implantation is a vacuum process in which a beam of ions is directed to the surface and introduced into it. This technique produces minimum invasion of the bulk properties of the substrate. Nitrogen plasma ion implantation treatments were done on the substrate, Cu-strengthened HSLA …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 1, Issue 1, 2014 · pp. 20–33 Read article