Glass fiber
18 articles · search the full text for this term
-
Modelling -Based Evaluation of Hybrid Natural Synthetic Fiber Polymer Composites for Sustainable Energy Applications
Abstract: The growing need of lightweight, high-performance, and green energy system materials has increased the research on hybrid polymer composites. This paper gives a modelling-based evaluation of polymer matrix composites which are reinforced using natural fibers like jute, sisal, bamboo in a combination with synthetic glass fibers to be used in sustainable energy sources. An analytical model has been used to assess the effect of hybrid fiber composition on mechanical, thermal, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 682–688 Read article
-
Synthesis of Glass Fiber Reinforced Polymer Composites Incorporating MWCNTS and Graphene: A Study on Dynamic Mechanical Behavior and Cole–Cole Representation
Abstract: Glass fiber reinforced polymer (GFRP) composites were fabricated using multi-walled carbon nanotubes (MWCNTs) and graphene as nanofillers through the hand lay-up technique. Two sets of composites were prepared by incorporating MWCNTs and graphene separately into the epoxy resin matrix at varying weight percentages (2%, 4%, 6%, 8%, and 10%). Mechanical and viscoelastic properties were evaluated following ASTM standards, and Dynamic Mechanical Analysis (DMA) was performed to study their mechanical and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1411–1403 Read article
-
AI-Driven Prediction of Square-Hole Laser Trepanning Performance in AA7075/15%SiC/15% Glass Fiber Hybrid Composites Using Taguchi–ANOVA and Deep Neural Networks
Abstract: Hybrid AA7075 composites reinforced with 15% silicon carbide (SiC) and 15% glass fiber were fabricated via the stir casting technique to improve machining and structural performance. The addition of dual reinforcements into the aluminum matrix was aimed at enhancing hardness, thermal stability, and surface quality during non-traditional drilling operations. Square-hole drilling was performed using a laser trepanning process, and the key responses—hole size accuracy, surface roughness, and taper angle—were systematically …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1932–1943 Read article
-
Thermal and Microstructural Evaluation of Natural-Glass Fiber Hybrid Composites: Sustainable Alternatives to Synthetic Materials
Abstract: The scope of engineering requirements for composite materials, which mix features from several elements engaged in engineering applications to enable greater performance, cannot be adequately understood in this way. The most recent of these materials are hybrid composites, which combine synthetic and natural fibers, particularly glass fibers, and are anticipated to create new, promising materials in terms of their ties to cost, performance, and consistency. From the perspective of their …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1275–1285 Read article
-
Experimental Investigation of Tensile Strength of Bamboo Fiber/Synthetic Glass Fiber
Abstract: In this work, hybrid fiber reinforced composites (HFRCs) with enhanced mechanical and physical characteristics are created by reinforcing composite laminates using a blend of natural bamboo fiber and synthetic glass fiber. The primary goal of the inquiry is to assess these composites' tensile and impact properties. In comparison to non-hybrid composites, the hybrid composite, which consists of two layers of bamboo fiber and one layer of bidirectional glass fiber, had …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1700–1710 Read article
-
Grey Relational Analysis of Cuttlefish Bone Particles–Glass Fiber Reinforced Epoxy Composites
Abstract: This research examines the mechanical characteristics, water absorption performance, and thermal stability of epoxy composites reinforced with Cuttlefish Bone Particles (CFBP) and glass fibers. Composites were fabricated with varying CFBP contents (0%, 3%, 6%, 9%, and 12%) using an epoxy resin as the matrix material and glass fiber as the primary reinforcement. The experimental results revealed that the CFBP-0 composite (neat epoxy with glass fiber) exhibited the highest tensile strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 239–246 Read article
-
Thermal Analysis of Natural Fiber and Hybrid Composites
Abstract: This study examines how natural fiber and hybrid composites reinforced with natural and glass fibers perform under thermal conditions specifically, the effects of temperature that are common in automotive and aerospace environments. To evaluate their behavior, the composites were tested at two elevated temperatures, 60°C and 70°C. Mechanical tests such as tensile and impact were conducted to simulate real-world operating conditions and assess how thermal, and moisture exposure influence the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1173–1196 Read article
-
Investigation of Mechanical and Thermal Behavior of Glass Fiber–Enhanced PEEK Parts Produced via Fused Filament Fabrication
Abstract: This study investigates the thermal and mechanical properties of Polyetheretherketone (PEEK) polymer and Glass Fiber (GF) reinforced PEEK polymer fabricated using the Fused Filament Fabrication (FFF) process. Specimens were printed in three building orientations—X, Y, and 45°—to evaluate the influence of layer deposition on polymer material performance. Tensile and flexural tests revealed that GF-PEEK polymer exhibited significantly higher Ultimate Tensile Strength (110 MPa in X-orientation), Young's Modulus (4.5 GPa), and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 65–78 Read article
-
Mechanical behaviour of Glass and Carbon fiber reinforced composites
Abstract: Components made with fiber reinforced composites are replacing components made with the conventional materials is due to holding superior mechanical properties and high specific strength with good corrosion resistance. These favourable attributes are not possible with a conventional monolithic material. Composites are developed with matrix and fibers as reinforcement material, the reinforcement fibers are playing a crucial role to attain a high strength property. Glass and carbon fibers are using …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 253–257 Read article
-
Experimental Investigation of Mechanical Properties of the Composite Materials Reinforced by Agro-based Waste Materials
Abstract: In this work, experiments were carried out to develop the glass fiber reinforced composites using the hand layup method and analyze the mechanical properties of the GFRP hybrid composites. The ultimate Tensile strength (UTS) using rice as a filler (GFRPC/R) was 3.04% and 12.89% higher than coir and wheat as filler, respectively. The hybrid composite using coir as a filler (GFRPC/C) revealed 12.54% greater flexural strength, and the hybrid composite …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 186–196 Read article
-
Addressing Global Disparities in Prosthetic Mobility: An Experimental Evaluation of Ankle-Foot Orthosis for Sustainable and Efficient Integration with Vehicle Structures and Systems
Abstract: Over the past two decades, the prosthetic foot industry has made significant advancements, greatly enhancing the quality of life for individuals with lower limb amputations in industrialized countries. However, these innovations remain out of reach for many in less developed regions due to high costs, limited durability, maintenance demands, and accessibility challenges. There is an urgent need to develop highly functional, cost-effective, environmentally friendly, and resilient prosthetic feet that can …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 44–52 Read article
-
An Overview Study on CO2 Absorption in High-strength Concrete
Abstract: Today, global warming is a major issue facing all over the world. The main reason behind an increase in the effect of greenhouse gas. The emission of carbon dioxide (CO2) from the construction industry contributes 9% to increasing greenhouse gas therefore it is our responsibility to work on the reduction of CO2. In this paper, we study CO2 absorption by using zeolite powder in concrete as a partial replacement for …
Published in Journal of Construction Engineering, Technology & Management · Vol. 12, Issue 3, 2022 · pp. 11–17 Read article
-
Structural Studies on Glass Fiber Reinforced Poly-styrene Composites
Abstract: Polymers are used in various industries and majorly in aerospace and automobile industry where in fuel efficiency is a big challenge. Polymers are lightweight hence by volume they make up 50% of a new vehicle but by weight it is less than 10%. Current economic and environmental concerns make the creation of more fuel-efficient cars a top priority in the automotive industry. Hence the study of these polymers becomes very …
Published in Trends in Mechanical Engineering & Technology · Vol. 11, Issue 3, 2021 · pp. 32–38 Read article
-
Optimization of Consolidation Temperature and Time for Self Reinforced High-density Polyethylene Composite
Abstract: Demand for high-density polyethylene (HDPE) for industrial production of domestic and commercial commodities has made it necessary to find ways of improving its mechanical properties. A viable approach towards this is the addition of reinforcements such as glass fibers. However, glass fiber reinforced composites suffer limitations because of reduced recyclability, great weight and difficult to thermo-form. In order to improve properties such as specific strength, stiffness and thermoformability of the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 11, Issue 1, 2021 · pp. 19–26 Read article
-
Design & Development of Helical Compression Spring Using Composite Material
Abstract: The paper embodies the manufacturing of a helical compression spring using composite material. The main motive for the use of composite material spring is its low density and greater stiffness to that of a steel spring. The composite material spring has greater stiffness to weight ratio as compared to the steel spring. We have manufactured carbon fibre and glass fibre spring using filament winding technique as less as possible economical …
Published in Trends in Mechanical Engineering & Technology · Vol. 10, Issue 3, 2020 · pp. 16–23 Read article
-
A Study on Tribological Behaviour of Fly Ash Filled Glass Fiber Reinforcement Epoxy Based Composites Using Taguchi Experimental Design
Abstract: Fiber-reinforced polymer composite materials have better corrosion resistance, better wear resistance, reduced weight of structure, good thermal/electrical insulation and conductivity, etc. due to their properties its application field include aircraft, space crafts, automotive, infrastructure, marine, and sporting goods. But a major industrial problem is erosive wear of structure components caused by abrasive particles. Solid particle erosion of engineering/structure components caused due to dusty operational conductions. But, even today, researchers worked …
Published in Journal of Experimental & Applied Mechanics · Vol. 11, Issue 1, 2020 · pp. 1–5 Read article
-
A brief review on Fiber reinforced polymer made by Fused Deposition Modeling
Abstract: Rapid prototyping (RP) techniques are used to quickly fabricate prototypes directly from CAD data using 3D printing or additive manufacturing. Fused Deposition Modeling (FDM) is one of the popular techniques of RP used to produce polymer parts, but due to limited mechanical properties of purely printed polymer using FDM there is a need developed to produce composites using FDM. The aim of this review article is to analyze the fiber …
Published in Journal of Production Research & Management · Vol. 8, Issue 1, 2018 · pp. 25–28 Read article
-
Numerical and Experimental Investigation on I-type Damage Evolution in Glass Fiber Reinforced Laminates Subjected to Quasi Static Loading
Abstract: Glass fiber reinforced polymer composites has become more popular material used in aerospace and marine structural applications due to their specific strength and anti-corrosion properties. The present work discusses the numerical and experimental investigation on I-type damage evaluation in glass fiber reinforced laminates under quasi-static loading is presented. Three volume fraction of glass and resin (40/60, 50/50 and 60/40) plies were selected for both numerical and experimental damage analysis. The …
Published in Emerging Trends in Chemical Engineering · Vol. 4, Issue 3, 2017 · pp. 27–33 Read article