electrical conductivity
13 articles · search the full text for this term
-
Experimental Investigation of Thermal Transport and Thermoelectric Performance of Si-Modified Bi₂Te₃ Thin Films
Abstract: Engineering silicon secondary phases provides an effective route to tailor charge and thermal transport in Bi2Te3-based thermoelectric thin films. In this work, Bi 2 Te 3 :Si nanocomposite thin films with Si content of 0, 2.3, 4.5 and 8.2% were prepared by RF co- sputtering and the effect of Si addition on the structural, microstructural, electrical, thermoelectric and thermal transport properties was investigated. X-ray diffraction confirmed the retention of the …
Published in Journal of Thermal Engineering and Applications · Vol. 13, Issue 2, 2026 Read article
-
Absorption-Dominated EMI Shielding in Benzoxazine/Epoxy Nanocomposites Reinforced with Graphene Oxide and Zinc Oxide
Abstract: Benzoxazine monomer was synthesized via a Mannich condensation reaction from phenolic and amine precursors, followed by thermal curing to form a crosslinked polybenzoxazine network for advanced composite applications. Electromagnetic interference (EMI) shielding materials based on lightweight polymer nanocomposites have attracted significant attention for advanced electronic applications. In this study, benzoxazine/epoxy nanocomposites reinforced with graphene oxide (GO) and zinc oxide (ZnO) at loadings of 5 and 10 wt% were prepared and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 345–365 Read article
-
Properties and Recent Progress in Oxide-Based Thermoelectric Materials
Abstract: Advanced thermoelectric materials that can be used efficiently for energy conversion have received significant research interest for the last decade because of the mounting demand for sustainable and eco-friendly energy technologies. The main advantage of thermoelectric materials is their capability to directly convert the waste heat into electrical energy which makes them highly promising for the recovery of waste heat from industrial processes, automotive systems and power generation applications. Oxide-based …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 2, 2026 Read article
-
Integrated Assessment of Soil Health Through Macronutrient Status and Physico-Chemical Properties in Selected Agricultural Blocks of Kangra District, Himachal Pradesh, India
Abstract: Soil health is a critical determinant of agricultural sustainability, particularly in ecologically sensitive Himalayan regions where intensive cultivation and heterogeneous landscapes influence nutrient dynamics. Balanced macronutrient availability, together with favourable physico-chemical properties, governs crop productivity, soil resilience, and long-term ecosystem functioning. Despite the agronomic importance of Kangra District (Himachal Pradesh), localized assessments integrating nutrient status with physico-chemical indicators across representative agricultural blocks remain limited. This study aimed to evaluate soil …
Published in Research & Reviews : Journal of Ecology · Vol. 15, Issue 1, 2026 · pp. 27–33 Read article
-
Next-Generation Conductive Polymer Composites for Flexible and Wearable Electronics
Abstract: The rising demand for flexible and wearable electronics has accelerated research into conductive polymer composites (CPCs) due to their lightweight nature, electrical conductivity, and mechanical flexibility. Despite significant advancements, challenges such as reduced conductivity under mechanical deformation and limited durability persist. This study aims to develop next-generation CPCs with enhanced conductivity, flexibility, and self-healing capabilities. Hybrid nanofillers—graphene, carbon nanotubes (CNTs), and silver nanowires (AgNWs)—were incorporated into bio-based conductive polymers through …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 550–566 Read article
-
Multifunctional Materials for Electro-Mechanical Applications: Synergistic Integration of Strength and Conductivity
Abstract: The integration of mechanical strength and electrical conductivity within a single material system has emerged as a critical requirement in the development of next-generation multifunctional materials. These materials are increasingly sought after in fields such as aerospace, flexible electronics, energy storage, and structural health monitoring, where the traditional separation of structural and functional materials leads to inefficiencies in weight, space, and overall performance. The convergence of these properties enables compact …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 3, Issue 1, 2025 · pp. 1–6 Read article
-
Composite Gel-Fibers and Solid-State-Processed Tapes Based on Disentangled Ultra-High Molecular Weight Polyethylene and Electrically Conductive Carbon Black: a Comparative Study
Abstract: In this study, oriented nanocomposite gel-spun fibers and solid-state-processed tapes were manufactured and analyzed. The fibers and tapes were produced using a specific type of nascent disentangled ultra-high molecular weight polyethylene (UHMWPE) reactor powder. As the filler, commercially available electrically conductive carbon black (CB) was used. The ultra-high filler content values up to 75 wt.% were achieved for the UHMWPE/CB gel-spun fibers, while the degree of filling was limited (up …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 151–165 Read article
-
Enhancement of Electrical Conductivity of Laterite Derived Ferric Oxide to Facilitate As Anode Materials
Abstract: Laterite is a mineral abundant in ferric oxide and various impurities, including aluminum oxide and silicon dioxide. The extraction of ferric oxide from laterite is accomplished through a cost-effective leaching process employing HCl, NaOH, and Sodium dodecyl sulfate (SDS). Characterization using Xray diffraction (XRD) confirmed the synthesized particles to be α-Hematite nano particles, with an average particle size of 94.21 nm, predominantly falling within the range of 90 nm to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 13, Issue 3, 2023 · pp. 1–11 Read article
-
Evaluating EC and TDS Concentration over Temperature Effect for Different Packed Bed Unit Treatment
Abstract: In this research, we evaluated the concentration of Electrical conductivity, Total Dissolved Solid and the effect of Temperature for the different packed bed units set up for treatment. The bio-adsorbents used were plantain stem fiber, banana stem fiber and palm fruit fiber and the investigation was aimed to examine the effect of EC, TDS and temperature on the performance of the bio-adsorbents in a packed bed unit The investigation was …
Published in Emerging Trends in Chemical Engineering · Vol. 10, Issue 3, 2023 · pp. 37–48 Read article
-
Quality Assessment of Water Samples from East Godavari
Abstract: Water quality for irrigation purposes is very important. In present study the water samples are collected from both Raja mahendra varam (RJY) and Kakinada (KKD) of East Godavari District, local areas of Andhra Pradesh, India from water sources like Ponds, Canals, Bore wells in summer season in the month of May 2019. The water samples were analyzed to determine the concentration of physico-chemical parameters to assess the quality of water …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 11, Issue 2, 2020 · pp. 17–23 Read article
-
Effect of Fillers on Electrical Conductivity of Epoxy Composites
Abstract: AbstractThis paper reports, electrical conductivity studies carried out on RT cure epoxy resin (LY556+HY951) containing three different particulate fillers graphite (Gr) a soft material, silicon carbide (SiC) a hard material and a hybrid graphite and silicon carbide (Gr-SiC). The weight fractions of three different fillers were varied from 10% to 40 wt% in steps of 10%. Increased filler fraction increases the electrical conductivity of epoxy composites for all the three …
Published in Journal of Polymer & Composites · Vol. 6, Issue 3, 2018 · pp. 25–30 Read article
-
Spectroscopic and Electrical Studies of Conducting Polyaniline Composites Embedded Nanostructure Zinc Sulfide
Abstract: Simple and low-cost chemical precipitation method was used for the synthesis of ZnS nanoparticles using zinc precursor and DMF as a stabilizing agent. Na2S was used as the source of sulphur ions. Composites of polyaniline and ZnS nanoparticles have been synthesized by in-situ chemical oxidation method by varying weight percentage of synthesized ZnS nanoparticles with aniline monomer. Optical studies in terms of UV-Vis and fluorescence show the positive effect of …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 2, Issue 3, 2012 · pp. 25–32 Read article
-
Instrument for Identification of Inter-phase between Two Liquids (Organic and In-organic) in Extraction Process Using Conductivity
Abstract: This paper is for design and development of a concept for an instrument for identification of phase separation between two liquids (i.e. organic and inorganic) in a single vessel. The instrument finds its applications in various industries like oil, nuclear etc. The process dynamics are maintained such that the ratio between the organic and the inorganic liquids always remains the same. Any deviation would indicate a change in the dynamics …
Published in Journal of Instrumentation Technology & Innovations · Vol. 2, Issue 1, 2012 · pp. 1–6 Read article