diffusion coefficient
5 articles · search the full text for this term
-
Service Life Prediction of Concretes Incorporated with Ground Granulated Blast Furnace Slag and Icrete with respect to Chloride Ion Penetration
Abstract: The reduced service life of concrete structures in coastal or de-icing salt conditions is commonly attributed to corrosion generated by chloride. Therefore, extensive research is being conducted to estimate the time taken for threshold chloride ions to reach the reinforcement and break the protective layer, initiating the corrosive process. This study conducted an experimental investigation on controlled concrete, concrete incorporating 50% GGBS, and concrete incorporating both 50% GGBS and 2% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 214–226 Read article
-
Nano-Scale Coating to Demonstrate the Capillary Motion of Dyed Water in a Single PMMA Microfluidic Device towards the Probable Fabrication of nanofluidic Engine-on-a-Chip
Abstract: A single microfluidic device is fabricated by polymethylmethacrylate (PMMA) using the maskless lithography, hot embossing lithography, nano-coating of diamond-like carbon (DLC), and direct bonding technique. A CMOS camera catching 25 frames per second with a corresponding time-scale resolution of 0.04 second is used to record the surface-driven microfluidic flow of dyed water. A comparison is made between the experimental results and analytical solution to determine the diffusion coefficient in this …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 22, Issue 3, 2020 · pp. 12–15 Read article
-
Effects of Channel Volume and Channel Aspect Ratio on the Surface-Driven Capillary Flow of Dyed Water in Sudden Expansion Microchannels Fabricated by Polymer
Abstract: In this experimental work, total three individual sudden expansion microchannels (microfluidic devices) are fabricated by polymethylmethacrylate (PMMA) using the maskless lithography, hot embossing lithography and direct bonding technique. Dyed water is prepared and used as the selected working liquid. Channel aspect ratio (channel height/channel width) is defined and used as the structural parameter in this work. Diffusion coefficient is used as the flow parameter. Effect of channel volume on the …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 10, Issue 2, 2020 · pp. 18–24 Read article
-
Experiments to Control the Surface-Driven Microfluidic Flow of Dyed Water in Straight PMMA Microchannels Fabricated by Maskless Lithography, Hot Embossing Lithography and Direct Bonding Technique
Abstract: Total six individual straight microchannels are fabricated by maskless lithography, hot embossing lithography and direct bonding technique using author’s own hands-on completely inside the cleanroom laboratory. Polymethylmethacrylate (PMMA) is the selected polymeric material to fabricate these straight microchannels. Dyed water is prepared as working liquid to record and study the microfluidic flow characteristics inside these fabricated microchannels. Air dielectric barrier discharge (DBD) plasma processing is the surface modification technique in …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 1, 2020 · pp. 17–23 Read article
-
Experimental Studies on the Effects of Liquid Viscosity and Surface Wettability in PMMA Microfluidic Devices
Abstract: The polymethylmethacrylate (PMMA) microfluidic devices are fabricated by the maskless lithography, hot embossing lithography and direct bonding technique. The effects of liquid viscosity, surface wettability and surface area to volume ratio on the surface-driven capillary flow are studied in the PMMA microfluidic devices using ethylene glycol, isopropyl alcohol (IPA), liquid mixture (aqueous IPA) and ethanol as working liquids. The diffusion coefficient is determined in each surface-driven capillary flow by comparing …
Published in Recent Trends in Fluid Mechanics · Vol. 4, Issue 1, 2017 · pp. 16–21 Read article