Search
281 articles for “thermal stability”
-
Simultaneous Improvement of Mechanical Properties and Thermal Stability of Polyvinyl Chloride Nanocomposite by Magnesium Aluminum-Layered Double Hydroxide
Abstract: The application of nanoclays in polyvinyl chloride (PVC) is limited as the organic modifier of conventional nanoclays can degrade PVC. Using usual nanoclays could reduce thermal stability due to the catalytic effects on PVC degradation, so the main chalenge is to find suitable nanoclay for PVC. The effects of two nanoclays, MgAl-layered double hydroxide and alkylammonium-modified montmorillonite, were studied on the mechanical properties of PVC nanocomposites. Dioctyl phthalate (DOP)-plasticized PVC …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 825–837 Read article
-
Comparative Thermal Stability of Structural Acrylic and Polyurethane Adhesives under High Heating Rate Conditions
Abstract: This study examines the thermal stability and degradation characteristics of structural acrylic and polyurethane adhesives through Differential Scanning Calorimetry (DSC) at an elevated heating rate of 15 °C/min. The purpose of this study is to assess the impact of rapid thermal excitation on the volatile loss of adhesives, their curing behaviour, and thermal decomposition profiles elements that are essential in high-speed manufacturing and thermally challenging settings. The findings indicated that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 717–725 Read article
-
Thermal Stability and Sound Absorption Behaviour of Sisal–Luffa Hybrid Epoxy Composites for Automotive Interior Applications
Abstract: Natural fiber–reinforced composites are gaining popularity as substitutes for synthetic fiber composites because of their environmental and sustainability advantages. Their adoption is steadily increasing across various industries. In automotive interior applications, these materials must exhibit strong thermal stability and efficient sound absorption to meet performance requirements. In this experiment, composites were made by mixing sisal and luffa fibers with epoxy resin. The hand lay-up method was used for fabrication. Two …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 144–157 Read article
-
Enhanced Thermal Stability and Thermophysical Properties of High Density Polyethylene Based Polymer Composite Synthesized Through Compression Moulding Route
Abstract: Polymer composite materials attract researchers as polymers can be filled with different fillers to get desired properties. Thermophysical properties of HDPE-silicon composite is reported in the present study. HDPE-Si composite was synthesized by hot compression and molding technique for different silicon volumetric ratio. Thermal conductivity as well as thermal diffusivity was found to be enhanced significantly on increasing the filler volumetric ratio. Thermal conductivity value for 20 volume % composite …
Published in Journal of Polymer & Composites · Vol. 11, Issue 5, 2023 · pp. 1–16 Read article
-
Thermal Stability and Impact Performance of Basalt–Carbon Hybrid Laminates in Polyimide–Phenolic Matrices
Abstract: The impact resistance and thermal stability of the advanced polymer composites are properties that are necessary for the components that are subjected to dynamic conditions, which show the overall reliability and service performance of the laminates applied in automotive structures, protective casings, etc. These properties prevent premature softening or breakdown during long-term exposure to heat. Impact resistance and thermal stability of composite laminates are studied based on fiber orientation and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 247–260 Read article
-
Polymer Matrix-Based High-Performance Thermoplastic Composites for Automotive Applications: Design, Characterization, and Interface Behavior
Abstract: The study emphasizes the role of high-performance thermoplastic polymer matrices such as PEEK, PPS, and PA6, selected for their superior thermal stability, mechanical strength, and recyclability in automotive environments. The expanded usage of electric vehicles (EVs) and self-driving transportation creates a demand for advanced materials which are weight-conscious yet high in strength relative to their weight, impact-resistant yet still being environmentally friendly. This study aims to create and define fiber-reinforced …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 216–237 Read article
-
Enhancing Mechanical Properties by Parameter Optimization in Fiber and Particle Reinforced Composites
Abstract: This research focuses on optimizing the mechanical and thermal properties of hybrid fiber and particle-reinforced composites through systematic parameter optimization using the Taguchi method and Grey Relational Analysis (GRA). Composites were fabricated using varying fiber volume fractions (20%, 30%, and 40%), particle sizes (20 μm, 60 μm, and 100 μm), and curing temperatures (60°C, 80°C, and 100°C) in a 3-factor, 3-level experimental design. Key properties such as tensile strength, impact …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 75–85 Read article
-
Marine Algal Microfiber and Agro-Waste Reinforced Crosslinked Polymer Composites for Sustainable Coastal Materials
Abstract: Crosslinked bio-polymer composites reinforced with marine algal microfibers and agro-waste fillers were fabricated and systematically characterized for sustainable coastal applications. Mechanical testing revealed that tensile strength increased from 18.5 MPa for neat polymer to 25.1 MPa at 20 wt.% reinforcement (~35% improvement), while the flexural modulus improved from 0.72 GPa to 1.02 GPa (~42% increase). Impact strength, however, decreased from 3.8 kJ/m² for neat polymer to 2.9 kJ/m² at 30 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 210–223 Read article
-
Ultrasonic Dispersion of Halloysite Nanotubes for Enhanced Mechanical, Thermal, and Morphological Performance of Epoxy Composites
Abstract: Halloysite nanotube (HNT)-reinforced epoxy nanocomposites were prepared by mixing HNT with bisphenol-A epoxy (LY 556) using ultrasonication, followed by compression molding. HNT contents of 0–5 wt.% were used. The composites were evaluated for tensile strength, flexural strength, Shore D hardness, Izod impact strength, and thermal stability using thermogravimetric analysis (TGA). The fractured tensile surfaces were also examined to understand the failure mechanism and interaction between HNT and the epoxy matrix. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Hybrid Polymer Nanocomposites with Enhanced Dielectric and Optical Properties for Wireless Communication Systems
Abstract: The incorporation of nanofillers into polymer matrices offers a promising approach to enhancing the multifunctional properties of composite materials. This study examines the effect of nanofiller concentration on the dielectric performance, mechanical strength, thermal stability, optical absorbance, and electromagnetic interference (EMI) shielding effectiveness of polyvinylidene fluoride (PVDF)-based nanocomposites. Titanium dioxide (TiO₂) and zinc oxide (ZnO) nanofillers were incorporated at varying concentrations to assess their influence on material properties. EMI shielding …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 518–549 Read article
-
Grey Relational Analysis of Cuttlefish Bone Particles–Glass Fiber Reinforced Epoxy Composites
Abstract: This research examines the mechanical characteristics, water absorption performance, and thermal stability of epoxy composites reinforced with Cuttlefish Bone Particles (CFBP) and glass fibers. Composites were fabricated with varying CFBP contents (0%, 3%, 6%, 9%, and 12%) using an epoxy resin as the matrix material and glass fiber as the primary reinforcement. The experimental results revealed that the CFBP-0 composite (neat epoxy with glass fiber) exhibited the highest tensile strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 239–246 Read article
-
Thermal Conductivity and Energy Storage Performance of Paraffin Wax-Based Composites Reinforced with Amine Functionalized Graphene as a Nanofiller
Abstract: In this study, amine-functionalized graphene (AFG) was employed as a nanofiller/nanomaterial to enhance the thermal and structural properties of a paraffin wax (PW)-based polymeric composite, formulated as a phase change material (PCM). The PW/AFG composite was synthesized with varying nanofiller volume fractions (0.20%, 0.40%, 0.80%, and 1.60%), and its thermal conductivity, stability, and energy storage performance were systematically analyzed. The incorporation of AFG into the polymer matrix significantly improved the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 355–374 Read article
-
Nano-Silica Reinforced Crosslinked Biopolymer–PCM Composites for Improved Thermal Cycling Durability
Abstract: Crosslinked biopolymer–PCM composites reinforced with nano-silica were developed to enhance thermal cycling durability, leakage resistance, and structural stability for advanced thermal energy storage applications. A starch-based biopolymer was chemically crosslinked using citric acid to create a stable polymer network, while paraffin was employed as the phase-change medium and nano-silica (1–4 wt%) served as a multifunctional inorganic reinforcement. FTIR analysis confirmed successful esterification between citric acid and the polymer backbone, indicated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1–10 Read article
-
Exploring The Performance Dynamics of Basalt Fibre Reinforced Polymers: Mechanical and Viscoelastic Insights
Abstract: Basalt fibre reinforced polymer (BFRP) composites are gaining significant attention as sustainable alternatives to traditional reinforcement materials due to their superior mechanical performance, thermal stability, and eco-friendliness. This study examines the tensile, flexural, impact, and viscoelastic properties of BFRP composites fabricated via vacuum-assisted resin transfer molding (VARTM) using varying fibre volume fractions (20%, 30%, and 40%) and fibre orientations (unidirectional and bidirectional). The results reveal that composites with 40% fibre …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 12–22 Read article
-
Effect of Thermal Conditioning - Mechanical Performance of Natural-Synthetic Fiber Hybrid Composites
Abstract: This study investigates the effects of thermal conditioning on the mechanical and thermal properties of banana-glass fibre hybrid composites, focusing on their tensile, flexural, impact strength, and thermal conductivity. Hybrid composites were fabricated with varying banana-to-glass fibre ratios of 70:30, 50:50, and 30:70 using a hand layup technique, followed by thermal conditioning at 60°C, 80°C, and 100°C for a specified duration. Results highlight that the 50:50 composite treated at 80°C …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 1–11 Read article
-
Rheological Studies of a Cross-Linked Polymer Gel System
Abstract: The petroleum accumulations are found associated with water and it is rarely obtained without accompanying water production. Water production is a major technical, environmental, and economic challenge associated with oil and gas extraction. Rheological findings are of fundamental importance for the development, manufacture and processing of innumerable products. Polymeric gels exhibit a wide range of rheological properties and they are stable both mechanically and thermally in most cases thus are …
Published in Journal of Petroleum Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 13–26 Read article
-
Preparation of Transparent and Thermal Resistant Zirconia Reinforced Epoxy Based Polymer Matrix Composite Coatings
Abstract: This study investigates the thermal stability, structural characteristics, optical transparency, and surface wettability of epoxy-based composite coatings reinforced with 2 wt.% zirconia (ZrO₂) nanoparticles. The composite coatings were synthesized using a dip-coating technique on carbon fiber substrates and subsequently subjected to thermal treatments at 300 °C, 400 °C, and 500 °C. Structural analysis using X-ray diffraction (XRD) confirmed the amorphous nature of the epoxy matrix with no significant crystallization or …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 171–177 Read article
-
Polymer-Nanowire Hybrid Composites Based on PEDOT: PSS and AgNWs for High-Performance Conductive Films in Flexible Devices
Abstract: The growing demand for flexible photovoltaic and wearable optoelectronic devices has intensified research into polymer-based conductive composites that provide transparency, flexibility, and electrical efficiency. In this work, we report the fabrication and characterization of a hybrid polymer nanocomposite electrode comprising silver nanowires (AgNWs) embedded within a PEDOT:PSS matrix, deposited on flexible polyethylene terephthalate (PET) substrates. The PEDOT:PSS polymer phase, modified with 5 vol% dimethyl sulfoxide (DMSO) and 0.1 vol% Zonyl …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 236–250 Read article
-
Comprehensive Performance Assessment of Silane-Treated Bio-Extracted Husk Fiber Reinforced Composites for Sustainable Construction Applications
Abstract: This research project is an extensive experimental study on bio-extracted husk fiber polymer composites with a focus on silane surface treatment. Bio-extracted rice husk fibers underwent an alkali-enzymatic hybrid extraction process followed by a 3-aminopropyltriethoxysilane (APTES) treatment for improved interfacial adhesion and matrix compatibility. Resin composites with treated and untreated fibers were fabricated with a weight ratio of 10%, 20%, and 30% via hand lay-up methods. A battery of mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 229–241 Read article
-
Recent Developments in Hybrid and Nanostructured Basalt Fiber Composites: A Review of Mechanical and Processing Innovations
Abstract: This review delivers a critical analysis of recent advancements in basalt fiber-reinforced hybrid composites (BFRHCs), emphasizing their transformative potential for advanced structural and high-performance applications. Basalt fibers, derived from volcanic rock, exhibit superior tensile strength, excellent thermal stability, and chemical resistance, offering a sustainable and cost-effective alternative to conventional glass and carbon fibers. Hybridization of basalt fibers with synthetic (e.g., carbon, glass) and natural fibers (e.g., flax, hemp) results in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 885–894 Read article