Search
237 articles for “tensile analysis”
-
Comparative Analysis of Tensile Properties of Virgin and Rice Husk-Reinforced PLA and ABS Filaments
Abstract: This study focuses on evaluating the tensile behavior of polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS) filaments reinforced with rice husk ash (RHA) particles, in comparison with their respective virgin counterparts. The incorporation of RHA, an abundant agricultural waste by-product, was considered with the objective of developing eco-friendly composites suitable for additive manufacturing applications. Tensile testing was carried out to assess the influence of the reinforcement on the mechanical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 224–229 Read article
-
EXPERIMENTAL INVESTIGATION OF WELDING PROCESS PARAMETERS ON MECHANICAL PROPERTIES FOR TIG WELDED AUSTENITIC STAINLESS STELL 304 JOINTS
Abstract: Minimally invasive surgeries are the most elusive, yet highly demanded subset of surgeries which requires precise knowledge of the pertinent patient. Compared to conventional surgeries, minimally invasive surgeries are characterized by less pain, low risk of infection, lesser scarring, etc. In the status quo, doctors use intuition through experience to determine the parameters for surgery such as the force required to cut, size of cut, depth of cut, etc. With …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 2, 2018 · pp. 6–9 Read article
-
Effect of Graphite and Titanium Dioxide on Mechanical Properties and Wear Behavior of Al based HMMCs
Abstract: Aluminium Metal Matrix Composites (MMC) is beneficial in a diversity of applications of engineering, particularly due to their strength while being lightweight. The intention of this paper is to develop a Hybrid Metal Matrix Composite (HMMC) using base metal aluminium alloy which is reinforced with different wt% of Graphite and Titanium Dioxide and then study the different mechanical properties like microstructure analysis, tensile strength, hardness, and wear behavior of HMMC …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 20–30 Read article
-
Analysis of Effect of Human Hair in Compressive and Split Tensile Strength of Concrete
Abstract: AbstractThis research paper presents the analysis of the effect of human hair in compressive and split tensile strength of concrete. In the recent time due to a significant increase in population increases large amount of human hairs. Human hairs are strong in tension and it also reduces greater impact, abrasions and shatter resistances in concrete and prevents many problems in this environment. Fiber reinforcement improves the impact strength and fatigue …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 9, Issue 2, 2018 · pp. 50–61 Read article
-
Design Analysis of PALF Natural Fiber Composite Laminate under Tensile Loading Condition using Simulation Approach
Abstract: Plant-based fibre reinforced materials are increasingly being employed for a variety of structural and non-structural purposes. Plant and animal-based fibres have different characteristics depending on a variety of circumstances. Mechanical qualities are primarily determined by parameters such as matrix, fillers, fibre content, fibre treatment, and fabrication techniques. The present work aim in analyzing the PALF natural fiber using simulation approach. In the process laminates are prepared as per ASTM standards …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 1, Issue 2, 2023 · pp. 23–29 Read article
-
Machine Learning Based Optimization of Polymer Structure Property Relationships in Composite Material Systems
Abstract: In modern engineering applications, polymer-based composite materials have garnered a lot of attention because of their lightweight nature, high strength-to-weight ratio, and changing physical features. In order to maximize the relationships between polymer structure and properties in composite materials, this study suggests a strategy based on reinforcement learning (RL). The research utilized the Polymer Composite Properties Dataset, which contains 12,700 records associated with polymer matrices, reinforcement fillers, interfacial bonding characteristics, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 242–255 Read article
-
Analysis of unidirectional aligned Banana and Glass fiber reinforced polyester composite for tensile and flexural strength
Abstract: The hybrid composite can be set up by utilizing at least two fiber fortifications in the composite. Here the hybrid composite was set up by utilizing banana/glass fiber. In addition, fiber volume loading was 40%. The tensile test and flexural test were preceded according to ASTM D3039 and ASTM D790 separately. The results show that 5% treated fiber shows higher properties than non-treated fiber composite. NaOH treated banana fiber with …
Published in Journal of Polymer & Composites · Vol. 8, Issue 2, 2020 · pp. 49–61 Read article
-
Optimizing Fusion Zone Grain Size, Hardness and Tensile Strength of Micro Plasma Arc Welded Titanium (Ti-6Al-4V) Alloy Using Grey Relational Analysis
Abstract: In the present work, Titanium (Ti-6Al-4V) alloy sheet of 0.5 mm thick is butt welded using Micro Plasma Arc Welding. Welding input parameters like peak current, base current, pulse rate and pulse width are considered and output responses like fusion zone grain size, hardness and ultimate tensile strength of the welded joint are considered. Taguchi L25 orthogonal matrix is adopted by considering four factors and five levels of weld input …
Published in Journal of Mechatronics and Automation · Vol. 5, Issue 2, 2018 · pp. 21–33 Read article
-
Study on High Strength Ti-Al-V Alloy at Cryogenic Temperature
Abstract: The α+β type high strength titanium alloy is usually used as a structural biomaterial for the manufacturing of orthopaedic prostheses as well as surgical and dental implants. The Ti-Al-V alloy had been deliberately solution treated at 860°C for 1 h (subsequently quenched in variable mediums) just below the β transus but within the α+β region to avoid grain coarsening for single β region as well as accomplish optimum balance properties …
Published in Journal of Materials & Metallurgical Engineering · Vol. 13, Issue 1, 2023 · pp. 1–14 Read article
-
Design and Performance Analysis of Sustainable Hybrid Composites for Impact Absorption and Lightweight Applications.
Abstract: This study explores the mechanical and structural properties of a novel hybrid composite composed of recycled tyre rubber, ceramics, and wood. The investigation focuses on key parameters, including energy absorption, compressive and tensile strength, and density, to evaluate the composite's suitability for diverse applications. The impact energy absorption test revealed that Sample A, comprising 50% rubber, 25% ceramic, and 25% wood, exhibited the highest energy absorption capability, with an average …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 95–104 Read article
-
E-glass Fiber Epoxy Composites: Role of Al2O3/SiC Fillers in Physical, Flammability and Mechanical Characteristics
Abstract: This study investigates the effects of varying weight percentages of Silicon Carbide and Alumina particles in epoxy-based composites, fabricated through compression molding, on their physical and mechanical properties. Comparing different studies on carbon fiber-reinforced polymer (CFRP) composites, as well as glass fiber-reinforced polymer (GFRP) composites, especially with the reinforcement of nanoparticles such as silicon carbide (SiC), alumina (Al2O3) and graphene. The investigations cover fabrication methods, like vacuum infusion and compression …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 238–250 Read article
-
Mechanical Characterization of Al6061 Hybrid Composites Reinforced with Boron Carbide and Fly Ash via Stir Casting
Abstract: The growing demand for lightweight, cost-effective, and high-performance materials in structural and automotive sectors has accelerated the development of hybrid metal matrix composites (HMMCs). This study investigates Al6061 alloy as the matrix material, reinforced with varying weight fractions of boron carbide (B₄C), a high-hardness ceramic, and fly ash, an economical industrial byproduct, to assess their synergistic effects on mechanical properties. Hybrid composites were synthesized using the stir casting technique to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1711–1719 Read article
-
Parametric Optimization of TIG Welding Process in Butt Joining of AISI 310 Austenitic Stainless Steel Materials
Abstract: Tungsten inert gas (TIG) welding is an arc welding process that uses a non-consumable tungsten electrode to produce the weld. Selection of the levels of the input parameters plays a very significant role in determining the quality of a weld joint. The present study is planned to investigate effects of process parameters: welding current, gas flow rate and arc gap on ultimate tensile strength in TIG welding of austenitic stainless …
Published in Journal of Production Research & Management · Vol. 9, Issue 2, 2019 · pp. 12–19 Read article
-
Finite Element Analysis of Multiwall Carbon Nanotubes Enabled Single Lap Joint
Abstract: This study uses finite element analysis (FEA) to examine the strength of adhesively bonded single lap joints with and without Multiwall Carbon Nanotubes (MWCNT) added to the adhesive. Shear strength analysis is performed by applying a tensile load that generates shear stress at the overlap between the two substrates bonded with adhesive. Aluminum (Al-Al) substrates were used, and single-lap joints were prepared following ASTM standards. Specimens with identical overlap and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 195–203 Read article
-
Interfacial Engineering of Carbon Fiber/Epoxy Laminates Using Functionalized Graphene Nanoplatelets: Experimental and Numerical Study
Abstract: Current research work studies the influence of amines(–NH₂) and carboxyl(–COOH) functionalized graphene nanoplatelets on the mechanical and thermomechanical behavior of unidirectional hybrid composite. Composites having different graphene concentration from 0 to 0.7 wt% were fabricated, characterized and analyzed for multiple testing - tensile testing, dynamic mechanical analysis (DMA) and Fourier transform infrared spectroscopy (FTIR). Tensile testing indicates better elastic modulus and tensile strength due to efficient load transfer between nanoparticles …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 61–77 Read article
-
Comparison of Compressive Strength, Shear Stress, and Tensile Stress for Load on Column and Load on Foundation Base
Abstract: The structural behavior of reinforced concrete columns and foundation base slabs subjected to axial loading and reactive forces was investigated in this study. The analysis focuses on the effect of upward reactive components generated by concrete resistance in columns and soil pressure beneath foundation bases. Since upward reactions are present in both structural elements, the corresponding lateral loads and resulting stresses were evaluated to verify the adequacy of the proposed …
Published in Journal of Construction Engineering, Technology & Management · Vol. 16, Issue 2, 2026 · pp. 42–50 Read article
-
Computation of the Necking in Bars Without Geometrical Imperfection
Abstract: This paper presents a finite element analysis to compute the neck profiles of smooth, circular cylindrical bars in shear-free grip under uniaxial tensile load. The analysis uses 4-node quadrilateral element with linear displacement variation, as well as 8-node Serendipity quadrilateral element with curved sides and a quadratic variation of the displacement field, for power law hardening materials that follow von Mises plasticity. All the elements are based on isoparametric formulation. …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 10–19 Read article
-
Fabrication, Interfacial Characterization, and Superparamagnetic Properties of Fe₃O₄@γ-Fe₂O₃ Core/Shell Nanoparticle-Reinforced Chitosan Biopolymer Composites
Abstract: Magnetite/maghemite core/shell nanoparticles were prepared by alkaline co-precipitation of Fe(II) and Fe(III) precursors followed by controlled thermal oxidation at 350 °C and subsequently incorporated into chitosan at 1, 3, and 5 wt% loadings by solution casting. The resulting films were evaluated by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), high-resolution transmission electron microscopy (HR-TEM), vibrating-sample magnetometry (VSM), thermogravimetric analysis (TGA), and tensile testing. XRD showed the characteristic cubic spinel reflections …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Effect of Carbonyl Iron Particle Concentration on The Printability and Stiffness of Magnetorheological Elastomer Filaments
Abstract: Magnetorheological elastomer (MRE) are increasingly valued for their field-responsive mechanical properties, making them ideal for adaptive components in automotive, aerospace, and vibration control systems. However, conventional mould-based fabrication methods limit design flexibility, produce excess material waste, and are unsuitable for complex or customized geometries caused challenges that have hindered broader industrial adoption. Although 3D printing offers a compelling alternative, research on printable MRE filaments remains limited, particularly regarding how carbonyl …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 310–317 Read article
-
Analysis of Friction Stir Welded Aluminum Alloys 2014 and 8011
Abstract: In this work we investigated friction stir welding of Aluminum Alloy 2014, Aluminum Alloy 8011. The major defects occurring while friction stir welding are tunnel effect, poor tensile strength, uneven material flow. The main causes for these defects are improper selection of welding parameters. The major welding parameters considered in Friction stir welding are spindle rotational speed (rpm), tool travel speed (mm/min) and tool angle (degree).In this work steps are …
Published in Journal of Materials & Metallurgical Engineering · Vol. 5, Issue 1, 2015 · pp. 12–17 Read article