Search
85 articles for “stress distribution”
-
Prediction of Depth-Induced Stress Distribution and Maintenance Cost Implications for Submerged Structural Components
Abstract: This study investigates the influence of water depth on stress distribution and structural integrity of submerged mechanical components . Structural models fabricated from mild steel, stainless steel, carbon steel, and copper alloy were examined under hydrostatic loading corresponding to water depths between 30 cm and 150 cm. Results indicate that normal and shear stresses increased proportionally with depth due to intensified hydrostatic pressure. Mild steel exhibited the highest stress concentrations, …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 29–35 Read article
-
A Comprehensive Study of Radial Load Fluctuation on Alloy Wheels for Electric Vehicles
Abstract: Electric Vehicle’s alloy wheels are designed to allow for better heat dissipation. Manufacturers carry out many tests of a wheel to be sure, that the wheel will fit for safety reason as also their comfortability level is even bigger. Therefore, a specific design was selected for which the simulations of alloy wheel were performed under real loading conditions. The main objective of this research is to analyze the effects of …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 2, Issue 2, 2024 · pp. 47–56 Read article
-
Bonding Strength Characteristics of FRP Cylindrical Composites Under Hygrothermal Loading
Abstract: This study investigates the bonding strength characteristics and stress distribution patterns in fiber-reinforced polymer (FRP) cylindrical composites subjected to hygrothermal loading conditions. A four-phase cylindrical model incorporating AS-Graphite and S-Glass fibers with low modulus epoxy coating was analyzed under four distinct pressure loading conditions (25.984, 38.976, 77.953, and 155.906 MPa). Comprehensive stress analysis revealed significant variations in von-Mises stress, maximum principal stress, and minimum principal stress across fiber, coating, matrix, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 950–967 Read article
-
Finite Element Modelling of Contact Stresses in Helical Gear Systems
Abstract: Helical gears are widely used in modern power‐transmission systems because of their high load‐carrying capacity, smooth meshing action, and increased overlapping of gear teeth. However, the design of helical gear pairs is constrained by contact stresses generated at the mating tooth surfaces, which can lead to surface fatigue (pitting), micro-cracking, and ultimately gear failure. Traditional analytical methods, such as those of the American Gear Manufacturers Association (AGMA) or International Organization …
Published in Trends in Machine design · Vol. 12, Issue 3, 2025 · pp. 35–39 Read article
-
Analysis aspects of pressure tank: A review
Abstract: This review paper presents a detailed analysis of pressure vessels, focusing on finite element analysis (FEA) to evaluate structural integrity. Pressure vessels are widely used in industries such as chemical processing, power plants, and oil refineries, where they are subjected to extreme temperature and pressure conditions. Ensuring their safe and efficient operation requires a thorough understanding of stress distribution, deformation characteristics, and failure mechanisms. This study reviews existing research on …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 49–55 Read article
-
Thermo-mechanical Modeling and Analysis of Heat Exchangers for Enhanced Performance in Renewable Energy Systems
Abstract: A comprehensive review of the thermo-mechanical properties of heat exchangers used in renewable energy facilities is presented in this research study. Heat exchangers are essential components of many renewable energy resources like biomass boilers, geothermal power plants, and solar thermal systems. It is crucial to comprehend their thermo-mechanical behavior in order to maximize efficiency, guarantee dependability, and increase operational lifespan. This work explores the complex interactions between mechanical stresses and …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 1, 2024 · pp. 13–19 Read article
-
Chemical Reactor Design and Analysis: A Review
Abstract: Chemical reactors play a critical role in industries such as oil and gas, chemical processing, and power generation, where they operate under extreme pressure and handle highly toxic, compressible fluids. The growing need for alternative energy sources has led to an increased demand for vessels capable of withstanding high pressure and temperature, especially in the chemical and petroleum industries. Recent innovations in chemical reactor technology have concentrated on creating new …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 2, 2025 · pp. 49–59 Read article
-
Adhesively Bonded Patch Repair in Polymer Composites: Effects of Reinforcement Configuration and Post-Cure Temperature
Abstract: Adhesive patch repair technique has been identified as an effective and economical approach to repair damaged polymer composite structures that are used in aerospace, automotive, marine, wind energy, and many other high-performance engineering applications. Adhesive bonding offers superior stress distribution, reduced stress concentration, less structural weight and fatigue resistance, and thus increases the lifetime of the repair of composite structures when compared to the traditional mechanical attachment approaches. Performance and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 991–1001 Read article
-
Fracture Analysis of Functionally Graded Material (FGM) Plates Using Extended Finite Element Method: A Review.
Abstract: Functionally Graded Materials (FGMs), have drawn a lot of interest in various engineering applications due to their superior mechanical properties and ability to withstand extreme conditions. Fracture analysis in FGMs focuses on understanding how cracks initiate and propagate within these complex materials. The stress distribution becomes irregular due to spatial property variations which produces different crack paths than what occurs in homogeneous materials. The examination of FGM plates under fracture …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 9–15 Read article
-
Engineering Perspectives: Thermal and Structural Examination of Disc Brakes for Light Vehicles
Abstract: The procedure of braking transforms the kinetic energy of a car into mechanical energy that needs to be released as heat. High temperatures may result from the frictional heat produced at the disc and pad interface during the braking phase. Frictional heat produced on the rotor surface can contribute to an excessive rise in temperature, which can have unfavorable effects including premature wear, brake fluid vaporization (BFV), thermally excited vibrations …
Published in International Journal of Electrical Machine Analysis and Design · Vol. 1, Issue 2, 2023 · pp. 16–23 Read article
-
Structural Performance Evaluation of Circular Perforated Plates under Mechanical Loading
Abstract: Circular perforated plates are structurally critical components in aerospace, automotive, and marine sectors, where perforation-induced stress concentrations govern failure under mechanical loading. This study conducts a systematic finite element analysis of stress distribution, deformation, and interlaminar behavior in aluminum and glass-epoxy laminates ([−45/45/90/0]S and [−45/45/90/0]AS) under uniform transverse pressure with clamped-free boundary conditions. Four perforation configurations—no hole, central hole, single-series, and 25-hole grid—were evaluated using ANSYS Shell-181, verified against Kirchhoff–Love, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 1–20 Read article
-
Optimal Design and Fabrication of drone for agricultural Purpose
Abstract: Due to their reliable technology and simple operation, drones have found widespread use in many fields. This study aims to plan, investigate, and build a quadcopter for use in farming. This drone is implanted for pesticide spray in the farms. An innovative quadcopter design that is easily removable and transportable is used in this study. The entire structure is developed in Iron CAD, and the viability of the new design …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 81–92 Read article
-
Design and Performance Evaluation of PLA-based Umbrella Wheels for Stair-Climbing Robotic Applications
Abstract: Staircase climbing robots require a complex design capable of navigating various stair configurations. A crucial component of such robots is the wheel mechanism. This paper focuses on the umbrella wheel mechanism and its application in staircase climbing robots. In this study, a PLA–based umbrella wheel structure is developed and fabricated using fused deposition modeling (FDM) for application in stair-climbing robots. The umbrella wheel geometry enables transformation from a circular rolling …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 808–824 Read article
-
Integrated Analysis of Stress Patterns in Transparent Polycarbonate Specimens: A Comparative Study between Photoelasticity and FEA Simulation for Compact Circular Testing
Abstract: Photoelasticity stands as a robust experimental technique within the realms of mechanics and materials science, offering a means to visually assess and analyze stress distribution within materials possessing transparency or translucency. This method, a non-destructive testing approach, involves the visualization of stress on a model subjected to a load, leveraging the unique property of materials known as birefringence or double refraction. The procedure entails the careful selection of a suitable …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 79–87 Read article
-
Strength Investigation on Butt Welded Polymer Tubes
Abstract: The purpose of this study is to examine instances in which pipes and butt welds are subjected to unintended stresses, resulting in fractures or full destruction. The behavior of radial force (perpendicular to the OX axis) in two circumstances is seen, and we conclude which of the two examples has more flaws. The two circumstances will be examined from an analytical, theoretical, and experimental standpoint, leading to some key findings …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 74–84 Read article
-
Investigating the Surface Defects and Structural Integrity of 3D Printed Hydrogen Storage Cylinders in UAV Applications
Abstract: This research explores the processing and manufacturing challenges of 3D printed polymer composites for high-pressure hydrogen storage in UAVs. The study focuses on addressing surface integrity and structural robustness issues inherent in additive manufacturing. Finite Element Analysis (FEA) was conducted on four thermoplastic polymer ABS, PET-G, HDPE, and Nylon to assess their mechanical performance under 35 MPa of pressure. Results revealed that PET-G and ABS provided better stress distribution and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 161–191 Read article
-
Optimizing Vehicle Structures Using Functionally Graded Materials of Aluminum and Carbon Fiber Reinforced Polymer Composites
Abstract: This article investigates the optimization of vehicle structures through application of functionally graded materials (FGMs), specifically aluminium and carbon fibre reinforced polymer (CFRP) composites. Such materials, known as FGMs, are characterized by spatial variations in composition and structure designed to improve so-called performance attributes. For the purposes of this research, the material properties of aluminium and CFRP composites are taken to be randomly distributed in thickness direction of a FGM …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 478–489 Read article
-
Structural Health Monitoring of Polypropylene Fiber- Reinforced Composite Using Accelerometer Sensors
Abstract: This study explores the application of accelerometer sensors for structural health monitoring (SHM) in evaluating the performance of polypropylene fiber-reinforced composites (PFRC). Incorporating polypropylene fibers into concrete enhances its structural integrity and durability. However, accurately assessing PFRC behavior under various conditions is crucial for its practical application in construction. This research employs advanced accelerometer sensor technology for real-time monitoring and assessment of PFRC performance. Experimental investigations captured and analyzed the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 621–634 Read article
-
Gear-Related Stress Analysis and Comparison Between the Fem and Agma Standards
Abstract: In many different devices, gears enable the efficient transfer of motion and torque. They are an essential component of modern mechanical power transmission systems. It has been demonstrated that bending and surface contact stresses at the gear tooth are the primary causes of gear failure, despite their widespread use. Too much stress can lead to tooth wear, pitting, or breakage, which can ultimately reduce the operating life and reliability of …
Published in Trends in Mechanical Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 13–18 Read article
-
Bio-Inspired FGPCs for Biomedical and Structural Applications
Abstract: Bio-inspired functionally graded polymer composites (FGPCs) represent a new class of smart materials that use gradient material distributions to enhance mechanical and biological properties, mimicking natural systems like bones, shells, and plant stems. FGPCs exhibit smooth gradient distributions across interfaces, which improves biocompatibility and reduces the risk of failure under complex loading and environmental conditions. In this study, bio-inspired FGPCs were designed, fabricated, and validated using a combined experimental and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 456–481 Read article