Search
620 articles for “strength properties”
-
Studies on the Influence of Squeezed Stir Casting Parameters on the Strengthening Properties of AZ91Mg Alloy
Abstract: In this research, optimum squeeze stir casting parameters of AZ91 Mg alloy has been investigated by considering its strengthening properties. Melting temperature, squeezed pressure, and molding temperature is the key parameters that are considered for this investigation. The result of this research reveals that 750°C melting temperature, 250 MPa squeezed pressure and 250°C molding temperature represent a significant combination with its strengthening properties in AZ91Mg alloy. This combination is confirmed …
Published in Journal of Polymer & Composites Read article
-
Influence of Rice Husk Ash and Granite Powder on Strength Properties of Concrete
Abstract: Concrete is the mostly utilised material in the field of Civil Engineering. As its consumption is huge in amount and so the scarcity of the raw materials has become a major issue. The important components of concrete are binding material along with the aggregates. Alternative materials are chosen for the replacement of cement to achieve sustainable concrete. Along with cement replacing materials, reusable wastes are also adopted to utilise in …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 133–138 Read article
-
Experimental Research on the Strength Properties of Concrete with Recycled Aggregate, Pond Ash, and Rubber Powder Replaced in Part for Concrete Materials in Standard Grades
Abstract: Concrete, a fundamental material in modern construction, poses environmental concerns due to its significant carbon footprint. To mitigate this impact, researchers explore alternative materials like fly ash, GGBS, alcofine, and rubber powder as cement replacements. This study examines the durability and strength of concrete that contains recycled aggregate, pond ash, and waste rubber powder. Waste rubber, abundant from industrial and automotive sources, poses disposal challenges. Pond ash, a byproduct of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 11–21 Read article
-
Experimental Investigation of Mechanical Properties of AR Glass Fibre Reinforced Self Compacting Concrete
Abstract: The plain cement concrete has brittle in nature and low tensile strength. Self-Compacting Concrete (SCC) is an efficient choice in construction because of its inherent capacity to fill gaps and flow without the need for external vibration. The necessity of self-compacting concrete can be recognized by seeing the growing issue of a trained labour shortage in the building sector. The advantage of SCC is that it allows for an earlier …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 69–79 Read article
-
Empowering Concrete: Enhancing Strength and Durability with Coal Bottom Ash
Abstract: The utilization of coal bottom ash, an industrial waste byproduct, as a sustainable alternative to river sand in concrete production has gained increasing attention due to environmental concerns and the need for resource optimization. This study examines how incorporating coal bottom ash into concrete mixtures, either partially or entirely replacing river sands, affects different properties. These properties include the workability of fresh concrete, as well as its compressive strength, splitting …
Published in Recent Trends in Civil Engineering & Technology · Vol. 14, Issue 1, 2024 Read article
-
Experimental Investigation on Strength and Durability Properties of Slag Based Alkali Activated Concrete Incorporating Fly Ash
Abstract: To minimize carbon emissions during cement production and to resolve landfill issues arising from industrial waste, the adoption of alkali-activated concrete (AAC) incorporating various by-products from industry has become increasingly popular as environmentally friendly option to conventional concrete in the construction sector. This study focused on strength and durability of AAC by utilizing waste industrial by-products such as ground granulated blast furnace slag (GGBS) and fly ash (FA) at ambient …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 393–400 Read article
-
Impact of Polypropylene Fibres on the Properties of Concrete
Abstract: This review paper explores the effects of polypropylene fibres on the mechanical and structural properties of concrete. The integration of short, discontinuous fibres into plain concrete enhances its post-cracking behavior and overall performance, with notable improvements in tensile strength, fracture strength, toughness, impact resistance, and flexural strength. These fibres effectively control crack propagation, increase energy absorption, and improve durability under varying loading conditions. A comprehensive analysis of prior research highlights …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 55–60 Read article
-
Optimizing Mechanical Properties of Polypropylene Fibre-Reinforced Coconut Shell Concrete
Abstract: This study investigates the impact of polypropylene (PP) fibre reinforcement on the mechanical properties of coconut shell (CS) concrete. The compressive strength of CS concrete is primarily governed by the strength of CS aggregates, with early-age failure attributed to poor bonding and later-stage failure influenced by aggregate strength. The incorporation of PP fibres significantly enhanced compressive, tensile, and flexural strength. At 28 days, compressive strength increased by 1.2–3.45% in CSF …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 6–12 Read article
-
Study on Evaluation of Mechanical Properties of Kerb Stone Incorporating Polypropylene Material for Enhanced Durability and Performance
Abstract: This study evaluates the mechanical properties of kerb stone incorporating polypropylene (PP) material, to enhance durability and performance. In the wake of increasing environmental concerns and the need for sustainable construction practices, the reuse of plastic waste, particularly polypropylene, has emerged as a promising solution. Polypropylene, known for its durability, resistance to chemical attacks, and low water absorption, offers significant potential when integrated into concrete products. In this research, standard …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 73–84 Read article
-
Performance Evaluation of Concrete with Binary and Ternary Blends of Fly Ash, Silica Fume, and Fiber Reinforcement
Abstract: This study evaluates the effect of ground granulated blast furnace slag (GGBS) as a partial replacement for cement on the mechanical properties of concrete, focusing on compressive and split tensile strength. Concrete mixes were prepared with GGBS replacement levels of 0%, 25%, and 50% and subjected to different curing methods, including water curing, steam curing, and conceal curing. These curing methods were selected to investigate their impact on hydration, strength …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 3, 2025 · pp. 40–45 Read article
-
A Review on The Role of Nanoparticles in Modifying Mg Alloys and Composites
Abstract: Reviewing and assessing magnesium's uses in the automobile sector, which have the potential to greatly improve fuel efficiency and environmental preservation, is the goal of this study. The report provides an overview of magnesium alloys' present benefits, drawbacks, technological obstacles, and future prospects in the automobile sector. The development of magnesium matrix composites has advanced to a new level thanks to the magnesium matrix nanocomposites' exceptional mechanical qualities. Dispersing nanoparticles …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 1, 2024 · pp. 24–32 Read article
-
Effect of Nanoclay Loading on Physical and Mechanical Properties of Epoxy Composites
Abstract: The effects of multilayer silicate loading on hardness, tensile, and impact properties were examined by developing epoxy–nanoclay composites with 0–5 wt% nanoclay. A desirable compromise between reduced void content and higher Shore D hardness was reached with an ideal nanoclay loading of 3 wt%, which reflected improved load transfer and increased matrix stiffness as a result of limited polymer chain mobility. Tensile strength and modulus rose up to 3 wt% …
Published in International Journal of Advance in Molecular Engineering · Vol. 4, Issue 1, 2026 · pp. 36–45 Read article
-
Polymer-Inspired Underwater Friction Stir Welding of Aluminum–Copper Composite Joints
Abstract: The problem of high-performance dissimilar joints and their compatibility with polymer and composite engineering applications is the impetus to the current work. This paper seeks to investigate the possibility of applying the polymer-based composite ideas with underwater friction stir welding (UWFSW) to improve the performance of AA5083 aluminumcopper joints. To achieve this a systematic experimental method was followed by varying the tool rotational speed, traverse speed and tilt angle and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 372–383 Read article
-
Optimization Of Mechanical Properties Of 500/7 Grade Ductile Cast Iron (DCI) By Using SMAW: Applications In Reinforced Composites And Thermoplastics Through Taguchi & GRA
Abstract: Welding, a critical manufacturing process, is broadly engaged to join metals and thermoplastics using heat, pressure, or both. This study inspects the Shielded Metal Arc Welding (SMAW) method to optimize welding parameters and improve the mechanical properties of Ductile Cast Iron (DCI) grade 500/7, a material widely used in high-strength and thermal conductivity applications in aerospace and automotive sectors. Using an L9 OA (orthogonal array), experiments were conducted on nine …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 204–222 Read article
-
Experimental Study on the Strength Enhancement of Carbon Fiber Reinforced GGBS Concrete
Abstract: This study provides an in-depth analysis of the experimental investigation conducted on carbon fiber reinforced GGBS concrete (CFRGC). The primary objective of the research was to evaluate the effects of carbon fibers on various mechanical properties of concrete, with a particular focus on strength parameters. In this study, the carbon fiber content was systematically varied from 0.5% to 1.5% by weight of cement, in increments of 0.5%, to determine the …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 36–50 Read article
-
Investigation of Mechanical Properties of Banana, Linen and Their Hybrid Reinforced Composite Laminates in Adverse Condition and Analyze Using ML
Abstract: This research investigates the mechanical performance of composite laminates reinforced with banana and linen fibers, focusing on both individual and hybrid fiber combinations. The primary objective is to assess how these natural fiber composites behave under extreme environmental conditions, particularly high humidity and fluctuating temperatures, which are common in aerospace and automotive applications.Key mechanical properties—tensile strength, flexural strength, and impact resistance—are experimentally evaluated to assess the performance and long-term reliability …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 25–31 Read article
-
Investigation of Mechanical Properties of Jute and Bamboo Natural Fiber Composites
Abstract: Natural fibers have become increasingly popular in recent decades. Natural fiber composites are also becoming increasingly popular in a various industries, including automobiles, furniture, packaging, construction and sports. Natural fibers have several advantages over synthetic fibers, including low cost, low density, reduced damage to processing equipment, good relative mechanical properties, renewability, and biodegradability. Natural fibers were also introduced with the goal of producing lighter composites, and they have shown a …
Published in Journal of Production Research & Management Read article
-
Mechanical behaviour of Glass and Carbon fiber reinforced composites
Abstract: Components made with fiber reinforced composites are replacing components made with the conventional materials is due to holding superior mechanical properties and high specific strength with good corrosion resistance. These favourable attributes are not possible with a conventional monolithic material. Composites are developed with matrix and fibers as reinforcement material, the reinforcement fibers are playing a crucial role to attain a high strength property. Glass and carbon fibers are using …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 253–257 Read article
-
Finite Element Analysis of Multiwall Carbon Nanotubes Enabled Single Lap Joint
Abstract: This study uses finite element analysis (FEA) to examine the strength of adhesively bonded single lap joints with and without Multiwall Carbon Nanotubes (MWCNT) added to the adhesive. Shear strength analysis is performed by applying a tensile load that generates shear stress at the overlap between the two substrates bonded with adhesive. Aluminum (Al-Al) substrates were used, and single-lap joints were prepared following ASTM standards. Specimens with identical overlap and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 195–203 Read article
-
Improving the Performance of Self-compacting Concrete Using Optimized Admixture Combinations
Abstract: This study explores the influence of various admixture combinations on the performance of Self-Compacting Concrete (SCC), with an emphasis on its flow behavior, compressive strength, tensile strength, flexural strength, and resistance to impact. Various admixtures, including Air-Entraining Agent (AEA), Water-Reducing Plasticizer (WPC), Retarder (RET), and Accelerator (ACC), were incorporated into the SCC reference mix (SP + VMA) to evaluate their impact on SCC performance. A series of tests—such as slump …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 81–89 Read article