Search
35 articles for “steel fiber reinforced concrete”
-
Effect of Polymer Modified Steel Fiber Reinforced Concrete on Bond Strength
Abstract: In this experimental investigation, the effect on bond strength (pullout test) of polymermodified steel fibers in concrete is studied. Varying volume fraction of steel fibers from 0 to7% at the interval of 1% of fiber and SBR latex polymer of fixed volume of 15% by weight ofcement were used. For this test, specimen of size 150 mmï‚´ 150 mmï‚´ 150 mm with 16 mmhigh yield deformed bar of length 650 …
Published in Journal of Experimental & Applied Mechanics · Vol. 6, Issue 2, 2015 · pp. 33–43 Read article
-
Effect of Fiber Hybridization on Compressive Strength and Water Permeability of Steel Fiber Reinforced Concrete
Abstract: The paper presents results of an investigation conducted to study the compressive strength and water permeability of hybrid steel fiber reinforced concrete (HySFRC). Steel fibers of different lengths, i.e., 12.5, 25 and 50 mm having constant diameter of 0.6 mm were systematically combined in different mix proportions to obtain mono, binary and ternary combinations. Mixes with no fibers were also cast for comparison purpose. Three fiber volume fractions, i.e., 0.5, …
Published in Recent Trends in Civil Engineering & Technology · Vol. 4, Issue 1, 2014 · pp. 11–16 Read article
-
Evaluating the behavior of Concrete after addition of stone dust to steel fiber reinforced concrete
Abstract: In contemporary construction practices, the utilization of concrete has become indispensable for various civil engineering projects worldwide. Concrete, augmented with both natural and artificial fibers, plays a crucial role in bearing compressive loads and efficiently transferring structural loads to the reinforcement and foundation. The current research delves into exploring the transformative effects of different mix designs, incorporating varying percentages of steel fibers, on the behavior of concrete. The study encompasses …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 12–19 Read article
-
Finite Element Analysis and Validation of Axial Capacity of RC Columns Made of Steel Fiber Reinforced Concrete (SFRC)
Abstract: Steel Fiber Reinforced Concrete (SFRC) possesses many excellent dynamic performances such as; high resistance to explosion and penetration. It has little effect on pre-cracking behavior in uniaxial compression, but substantially enhances its post cracking response. This response leads to a greatly improved ductility and toughness. Steel fibers in SFRC are capable of preventing crack propagation as well as brittle failure of columns under uniaxial compression. To this end, four reinforced …
Published in Journal of Construction Engineering, Technology & Management · Vol. 5, Issue 2, 2015 · pp. 9–14 Read article
-
The Study of Structural Behavior of Steel Fiber Reinforced Concrete Beam
Abstract: The steel fibers are most widely used fibers in the present state of development of fiber reinforced concrete (FRC). This is due to the advantage that the addition of fibers to concrete converts the brittle characteristics of concrete to a ductile one, such as slabs and thin webs, where the use of shear reinforcement is not possible, the steel fibers gives them the strength to resist shear. The present study …
Published in Journal of Structural Engineering and Management · Vol. 2, Issue 3, 2015 · pp. 27–33 Read article
-
Water Permeability of Hybrid Steel Fiber Reinforced Concrete
Abstract: Results of an investigation conducted to study the water permeability of (HySFRC) are presented. Steel fibers of different lengths, i.e., 12.5, 25 and 50 mm having constant diameter of 0.6 mm were systematically combined in different mix proportions to obtain mono, binary and ternary combinations corresponding to 0.5, 1.0 and 1.5% fiber volume fractions. A reference concrete mix containing no fibers was also cast for comparison purpose. A total number …
Published in Journal of Construction Engineering, Technology & Management · Vol. 4, Issue 2, 2014 · pp. 30–37 Read article
-
Strength and Durability of Steel Fiber Reinforced Concrete: A Review
Abstract: AbstractConcrete is essential construction material, since it is brittle in nature so the addition of steel fiber provides some ductility to the composite also the replacement of cement with other cementitious materials gives both environmental and economical benefit. Sometimes in adverse conditions concrete has to face some chemical attacks which affect the durability of concrete. This paper deals with the detailed literature review and explores the techniques to find the …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 1, 2018 · pp. 34–40 Read article
-
Effect of Silica Fume and Granite Powder on the Ratio of Mode II to Mode I Fracture Energies of Steel Fiber Reinforced Concrete
Abstract: The paper presents the results of an experimental investigation which assesses the effect of silica fume and also granite powder on fracture of steel fiber reinforced concrete under Mode I and Mode II loadings. Tests have been conducted on new notched beam specimens under pure shear (proposed in earlier paper of the authors). The test specimens made from concretes in which partial cement replacement (10%) by (1) silica fume and …
Published in Journal of Structural Engineering and Management · Vol. 1, Issue 3, 2014 · pp. 5–14 Read article
-
Comparative Study of Steel Fiber for various shape
Abstract: This research paper presents a comparative study of metal-reinforced steel fibers in concrete. The study aims to analyze the effects of incorporating metal fibers along with steel fibers on the Compressive, flexure, and structural properties of steel fiber-reinforced concrete (SFRC). Analytical review were conducted on various concrete mixtures, comparing samples with different shape of steel fibers. The results show that the addition of metal fibers improves the mechanical properties of …
Published in Journal of Structural Engineering and Management · Vol. 10, Issue 1, 2023 · pp. 8–13 Read article
-
Poisson’s Ratio in Stone Dust and Steel Fiber Reinforced Composite Concrete: A Theoretical Approach
Abstract: Poisson's ratio characterizes a material's deformation under load, offering insights into its structural behavior. Yet, there's a lack of research on SDSFC's Poisson's ratio, hindering its widespread adoption. This study aims to fill this gap by investigating SDSFC's Poisson's ratio under various curing conditions and material compositions. By analyzing how curing methods and material components influence Poisson's ratio, we can better comprehend SDSFC's behavior under different circumstances. Additionally, we'll explore …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 88–94 Read article
-
Behavior of SFRC composite pile resting on sloping ground of cohesive and non-cohesive strata
Abstract: Reinforced concrete piles are increasingly being utilized in situations where there is a need to transfer loads in deep strata, particularly for infrastructure projects built on sloping grounds. The present study comprises a finite element analysis (FEA) to investigate the lateral load-bearing capacity of steel fiber reinforced concrete (SFRC) pile, embedded in sloping grounds with sandy and clayey soils. The lateral load capacity of the steel fiber reinforced concrete pile …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 19–31 Read article
-
Experimental Investigation of Mechanical Properties of Hybrid Fiber (Basalt and Steel) Reinforced Concrete
Abstract: The paper reports experimental investigations on hybrid-reinforced concrete. The proportion of basalt fiber and steel fiber was 50% respectively of the total fiber taken as sample. Effect of fiber on various strengths of concrete is studied. Fiber content varied from 0 to 4% at an interval of 1% by weight of cement. Various considerations for investigation are compressive strength, flexural strength, split tensile and bond strength. Cube of size 150 …
Published in Journal of Construction Engineering, Technology & Management · Vol. 3, Issue 2, 2013 · pp. 5–10 Read article
-
Analysis of Steel Chip Fiber Reinforced Composite Dual Pile Under Lateral Load Conditions on Sloping Terrain
Abstract: Pile foundations, in addition to supporting vertical loads from superstructures, are subjected to lateral stresses arising from seismic activities, wind gusts, water currents, and traffic impacts etc. Failure to account for these lateral forces can pose significant risks if the structure is expected to encounter any form of lateral pressure. Previous research has investigated the behavior of individual composite piles under horizontal forces, considering different soil properties, to determine the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 210–220 Read article
-
Parametric Study of Fiber-Reinforced Concrete with Partial Cement Substitution Using Fly Ash and Rice Husk Ash
Abstract: This research aims to evaluate the impact of incorporating steel fibers [SF] and partially substituting cement with rice husk ash [RHA] and fly ash [FA] on the properties of concrete. SF were added in different volume fractions [0%, 0.25%, 0.5%, 0.75%, and 1.0%], combined with 10% RHA and 20% FA. Initially, the concrete mix contained 30% FA with no RHA, which was then adjusted to a mix of 15% FA …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 171–180 Read article
-
Effect of Polymer Modified Fibers on Strength of Concrete
Abstract: AbstractThe results of an experimental investigation to study the effects of hooked steel fibers with varying dosage and polymer latex with fixed dosage in concrete are studied. In this experimental study, varying volume fraction of hooked steel fibers from 0% to 7% by weight of cement at the interval of 1% of fiber and SBR latex polymer of fixed volume of 15% by weight of cement were used. All specimens …
Published in Journal of Polymer & Composites · Vol. 3, Issue 1, 2015 · pp. 15–24 Read article
-
Impact of various Fibers on the Mechanical and Durability Performance of Fibre-Reinforced Concrete with SBR latex
Abstract: Recent years included a proliferation of research efforts focused on fibre reinforced concrete (FRC), an innovation that perceives extensive application in the construction industry. FRC's enhanced mechanical properties ahead of conventional concrete have broadened its significance recently. Natural fibers have been produced in response to expanding environmental deterioration in recent years, and research is currently continuing with the goal of utilizing them in the construction field. This study explores the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 26–40 Read article
-
Study of High Strength Fiber Reinforced Metakaolin Concrete under Flexure and SplitTensile Strength
Abstract: An experimental investigation was carried out to study the effect of inclusion of metakaolin and steel fibers on high strength concrete in flexure and split tensile strength. The beams of 150x150x700 mm were casted. M60 grade of concrete was used. Superplasticizers were used to improve workability. The metakolin was added upto 20% with the increments of 5% and steel fibers were added upto 5% with the increment of 0.5%. Various …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 2, 2016 · pp. 70–80 Read article
-
Enhancement in Performance of Conventional concrete mixes by using hybridization with steel & polypropylene fibres
Abstract: This experimental study evaluates the influence of incorporating steel and polypropylene fibers on the mechanical performance of high- performance concrete (HPC) across M30, M35, and M40 grades. This research focuses on evaluating the mechanical properties of High- Performance Concrete (HPC) enhanced with a hybrid reinforcement system consisting of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers are utilized to improve the compressive and tensile strengths, while polypropylene fibers contribute …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
A Strategy for Safer and More Resilient Industrial Construction
Abstract: This study investigates the effects of incorporating steel and polypropylene fibers into high-performance concrete (HPC) to enhance its mechanical behavior and ensure greater safety in industrial structures. The research focuses on HPC mixtures of M30, M35, and M40 grades reinforced with a combination of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers contribute to improved compressive and tensile strengths, while polypropylene fibers help control crack formation and dissipate energy …
Published in Journal of Industrial Safety Engineering · Vol. 12, Issue 3, 2025 · pp. 1–6 Read article
-
A Review on Mechanical Behavior of Various Strength And Flexure Parameters on Hardened High Strength Fiber Reinforced Concrete (HSFRC)
Abstract: This Review paper presents the Study for effective use of different shapes Steel Fibre for enhancing Flexural capacity of High Strength Concrete Beam, Along with Compressive & tensile strength. The flexural tensile strength or modulus of rupture (MOR) of concrete generally referred to tensile strength is an important parameter for determining deflection, minimum flexural reinforcement and to compute the on-set of visible cracks in a concrete structure under flexure. It …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 1–5 Read article