Search
50 articles for “pressure coefficient”
-
Numerical Analysis of NACA Airfoil 0012 at Different Attack Angles and Obtaining its Aerodynamic Coefficients
Abstract: Aircraft post-flight reduction is one of the most important research topics, since post-reduction is effective in all parameters of bird performance, such as maximum speed, fast acceleration, shortening the runway required, high maneuverability, and reduced fuel consumption. Therefore, it is important to examine how the force applied to the airfoil changes in different streams from an industrial point of view. In this study, NACA(National Advisory Committee for Aeronautics) Airfoil 0012 …
Published in Journal of Mechatronics and Automation · Vol. 6, Issue 3, 2019 · pp. 8–16 Read article
-
Integration of Vertical Axis Wind Turbines into Urban Environments: Feasibility and Design Considerations
Abstract: Abstract This study aims to comprehensively investigate the performance of Savonius rotor wind turbines through a combination of numerical simulations and experimental testing. Initially, 3-dimensional CAD software Solidworks and ANSYS will be utilized to design detailed models of the turbines. Numerical meshes will then be generated around these models using FLUENT software, incorporating the k-ε turbulence model to simulate fluid flow fields. Parameters such as drag coefficient, lift coefficient, pressure …
Published in Journal of Aerospace Engineering & Technology · Vol. 14, Issue 2, 2024 · pp. 20–25 Read article
-
A Study of The Performance of surface modified NACA 2416 Airfoils at various Angles of Attach at Re80000
Abstract: This study delves into the aerodynamic effects and characteristics of surface-modified NACA 2416 airfoils, placing a greater emphasis on the aerodynamic efficiency of a two-dimensional surface-modified NACA 2416 airfoil under subsonic flow conditions at Re=80000 and various angles of attack (AOAs). The surface-modified airfoils were crafted using CATIA V5, and simulations were conducted in ANSYS Fluent for angles of attack ranging from 0° to 12°.The CFD results encompass a broad …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 34–39 Read article
-
A Numerical Analysis of Solar Chimney Power Plant and Study of Parameters Effecting it
Abstract: AbstractA comprehensive theoretical solar chimney power plant (SCPP) model has been introduced to overcome the energy crisis. Numerical simulation performed on the 2-dimensional models of the SCPP. Different numerical models are taken into account by changing the geometrical parameters of the chimney inlet, absorber temperature, and chimney inclination angle and chimney outlet geometry. Air velocity, heat transfer coefficient, pressure, and turbulent kinetic energy are the some parameters taken into account …
Published in Journal of Thermal Engineering and Applications · Vol. 5, Issue 2, 2018 · pp. 22–42 Read article
-
Molecular Investigation of CO2 Solubility and Diffusion in Crude Oil
Abstract: It is important to know solubility and molecular diffusion coefficients of gas under reservoir CO2 Enhanced Oil Recovery. In this paper, a set complete device has been established to measure solubility and molecular diffusion coefficients of gas to improve the empirical formula and chart. Based on the experiment, molecular diffusion coefficients and solubility is evaluated, which provides the fundamental data to CO2 Enhanced Oil Recovery. The solubility vs. pressure linear …
Published in Journal of Petroleum Engineering & Technology · Vol. 3, Issue 2, 2013 · pp. 28–35 Read article
-
Macro-flow Dynamics of Wind over C H and L type Buildings
Abstract: Synoptic and downburst winds are most prevalent in the Indian subcontinent. This paper presents the analysis of the dynamics of these two winds around different buildings using numerical simulation. ANSYS CFX 18 code has been used for the simulation. To maintain accuracy in the results, the grid independence test has been considered. Three commonly used building types C, H and L have been considered for the study. For each type …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 11, Issue 3, 2021 · pp. 43–58 Read article
-
Study on the Profile and Flow Field Variation of Parachute Coating by Seven-hole Probe Method
Abstract: In general, the parachute test is a long test cycle, expensive, and difficult to measure with accuracy, which makes it a very laborious and time-consuming task. Therefore, attempts have been made to overcome this by using a parachute test stand or by simulation, but in our country, there is no numerical simulation of the parachute and there is no research on it. In this paper, the variation of the shape …
Published in Journal of Aerospace Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 26–37 Read article
-
Experimental Investigation of Heat Transfer Rates in Water Coils Under Various Flow Conditions
Abstract: This study investigates the influence of various flow conditions on heat transfer rates in water coils through experimental analysis. Water coils, crucial for efficient thermal management in industrial applications, were tested under different flow rates and orientations to assess their impact on heat transfer performance. The experiment involved measuring heat transfer coefficients and pressure drops for coils subjected to flow rates ranging from 0.5 to 5 L/min and comparing results …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 11, Issue 2, 2024 · pp. 36–42 Read article
-
Pressure Data Analysis and Reservoir Parameter Estimation of Kailastilla Gas Field (Well No. KTL-01 and KTL-02)
Abstract: Well testing has been the subject of research for many decades. Well tests are performed in order to estimate reservoir properties. These estimations are needed to predict the amount of oil or gas that can be produced, and to determine a strategy how to produce this predicted amount. The current method to estimate the reservoir properties seems cumbersome and inefficient. Also, uncertainty regions of the estimated properties are not yet …
Published in Journal of Petroleum Engineering & Technology · Vol. 2, Issue 1-3, 2012 · pp. 92–102 Read article
-
Analysis of Submarine Hydrodynamics and NACA Aerofoils Using Ansys Fluent
Abstract: This study investigates the hydrodynamic behaviour of submerged offshore vehicles, including submarine hull and NACA aerofoils through simulation and fluid flow analysis, using ANSYS Fluent. The study models the interaction between fluid flow and offshore submerged vessels i.e. a Standard Submarine Model and various NACA profiles, simulating pressure distributions and drag forces that affect offshore operational stability. The analysis comprises of the study of multiple mesh profiles required to calculate …
Published in Journal of Offshore Structure and Technology · Vol. 12, Issue 2, 2025 · pp. 48–55 Read article
-
Calibration And Comparison Of An Improved Rotatable Single Hole Probe In 4, 6 And 8 Positions
Abstract: An improved single hole probe with a measurement volume of 0.3 mm dia. is developed in the present investigation. The probe is calibrated in a low turbulence open jet tunnel at a velocity of 50 m/s in yaw and pitch angle range of + 40 deg. at an interval of 5 deg. A special probe holder is developed so that the probe can be positioned at intervals of 15 deg. …
Published in Recent Trends in Fluid Mechanics · Vol. 8, Issue 2, 2021 · pp. 25–36 Read article
-
CFD simulation of methane flow through an orifice plate
Abstract: In this paper the effects of errors in the flow rate and discharge coefficient when Methane (CH4) flow through orifice plates with flange tapping has been investigated by the Computational Fluid Dynamics (CFD). The location of vena- contracta was also estimated from CFD simulations. Outcomes of the CFD simulations are in terms of profiles of pressure and velocity. In this study a numerical investigation of the flow characteristics behavior caused …
Published in Journal of Petroleum Engineering & Technology · Vol. 9, Issue 1, 2019 · pp. 1–6 Read article
-
Harmonic Analysis of Arterial Blood Pressure Signal Using Fourier Decomposition for Autonomic Health Assessment
Abstract: AbstractIn the present study, the arterial blood pressure waveform is decomposed utilizing Fourier to examine the fundamental frequency and to build up a linkage for autonomic health assessment. This methodology will produce practically identical fundamental frequency, either utilizing noninvasively recorded photoplethysmogram (PPG) or the blood pressure signal. In order to normalize the both, signal PPG waveform is approximated to arterial blood pressure waveform by nonlinear fitting blood pressure values to …
Published in Current Trends in Signal Processing · Vol. 7, Issue 3, 2017 · pp. 7–14 Read article
-
Investigation of Performance Characteristics of Shell and Tube Heat Exchanger Using Helical Baffles with Parallel Flow and Counter Flow Arrangements
Abstract: AbstractShell and tube heat exchangers are widely used in process industries and refineries owing to ease of manufacturing and versatile operations. The designer always focuses on improvement in performance characteristics of STHX, based on the given heat duty and geometrical constraints. Several researchers and investigators have suggested various methods for performance optimization of shell and tube heat exchangers. In the present work, experimental investigation is performed using helical baffles in …
Published in Journal of Thermal Engineering and Applications · Vol. 6, Issue 1, 2019 · pp. 14–19 Read article
-
Hydrodynamic Analysis of Symmetrical Naca Airfoils: A CFD Simulation Approach
Abstract: This study presents a comprehensive numerical investigation of the hydrodynamic characteristics of selected NACA airfoil profiles using advanced computational fluid dynamics (CFD) simulations performed in ANSYS Fluent. The primary objective is to evaluate the fluid–structure interaction behavior of these airfoils when subjected to marine flow conditions relevant to offshore and submerged engineering applications. By modeling the interaction between incompressible fluid flow and various NACA geometries, the study systematically analyzes key …
Published in Journal of Offshore Structure and Technology · Vol. 13, Issue 1, 2026 · pp. 31–38 Read article
-
Computational Investigation of Drag Reduction by means of Two-Dimensional Roughness Element on the Suction Surface of an Airfoil
Abstract: Computational investigation carried out to the effects of a two-dimensional roughness element placed on the suction surface of a zero camber airfoil of 1 m chord on its performance is presented. The roughness element was placed on suction surface of the airfoil at a distance of 30% from the leading edge of the airfoil. The roughness element was in the form of a wire. The diameter of the wire was …
Published in Recent Trends in Fluid Mechanics · Vol. 9, Issue 3, 2022 · pp. 12–26 Read article
-
Heat Transfer in Single Effect Solar Assisted LiBr-H2O Absorption Refrigeration Cycle
Abstract: This paper describes the heat transfer model of LiBr-H2O vapour absorption cooling system implemented in engineering equation solver (EES). The detailed first law analysis of the system is presented. Effects of operating temperature and pressure on the heat load in various components, coefficient of performance (COP), and circulation ratio of the system have been carried out. Impact of solution heat exchanger effectiveness on system performance is also studied. The study …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 7, Issue 2, 2016 · pp. 1–11 Read article
-
A Review on Shell and Tube Heat Exchanger Design Optimization
Abstract: Shell and Tube Heat Exchangers are extensively used throughout the process industry. The design optimization of S&T Heat Exchanger involves the consideration of many interacting design parameters which can be summarized as Process fluid allocation to shell side or tube side, setting pressure drop design limitation, setting velocity limits, fouling coefficients, selection of type of heat exchanger, layout as per TEMA and number of passes. Different Tube parameters like size, …
Published in Trends in Machine design · Vol. 5, Issue 2, 2018 · pp. 42–53 Read article
-
Passive Augmentation Studies in a Double Pipe Heat Exchanger with Ellipsoidal Dimples
Abstract: In this work, the numerical studies of heat transfer augmentation of a counter-current double pipe heat exchanger with ellipsoidal dimples (inward-facing, raised dimples) on the inner tube was performed using SOLIDWORKS software. The effect of dimple depth, dimple pitch and number of dimples/angles between two dimples on heat transfer was investigated at a constant volumetric flow rate of 4 LPM for hot (water) and cold (water) fluids. The effect of …
Published in Journal of Thermal Engineering and Applications · Vol. 13, Issue 2, 2026 Read article
-
Pressure Data Analysis and Multilayer Modeling of A Gas-Condensate Reservoir
Abstract: Kailastila gas field located at Golapgonj, Sylhet, is one of the largest gas fields in Bangladesh. It produces a high amount of condensate along with natural gas. For the high values of GOR, it may be treated as a wet gas at reservoir condition. Three main sand reservoirs are confirmed in this field (upper, middle and lower). In this study, it has been shown that reservoir parameters of this gas …
Published in Journal of Petroleum Engineering & Technology · Vol. 4, Issue 2, 2014 · pp. 7–15 Read article