Search
151 articles for “particulate reinforcement”
-
Centrifugal Casting of Nano Crystalline TiB2 Reinforcement Particulate Reinforcement in Al-Alloy Matrix
Abstract: A method of producing Nano size TiB2 particles within an aluminium matrix is the in situ reaction synthesis method, using KBF4 and K2TiF6 potassium based bearing fluxes. The advantages of this in situ reactive process are a small particle size and good particle/matrix interfacial bonding. However, this method is limited to producing low particulate volume percentage material (˂6 vol%). To overcome this limitation, centrifugal casting has been investigated. A series …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 3, 2013 · pp. 7–13 Read article
-
Fabrication and Experimental Investigation on Mechanical Properties of Quartz Particulate Reinforced Aluminium Composite
Abstract: Composites are processed by adding a reinforcement phase in a base metal. The base material is known as a matrix and the constituent that is added is called reinforcement. The matrix acts as a support while the reinforcements attach themselves in their respective positions which results in the synthesis of a material which has different mechanical and thermal properties compared to their raw materials. Since aluminium is used as a …
Published in Journal of Production Research & Management · Vol. 14, Issue 3, 2024 Read article
-
Fabrication and Testing of Physical Behavior of Coconut Shell Micro Particulate and Walnut Shell Micro Particulate Reinforced Epoxy Composites
Abstract: Enhancing the physical characteristics of high-performance materials is largely dependent on the reinforcement of polymers by microparticles. The physical behavior of polyester composites containing coconut and walnut shell microparticles was thus investigated in order to create an engineering material for industrial use. Most researchers investigated the flammability test of fiber bio-composites only. There is a possibility that two particular polymers embedded in a thermoset polymer matrix could provide the lowest …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 592–603 Read article
-
MECHANICAL CHARACTERISATION AND METALLOGRAPHY OF SiO2 PARTICULATE REINFORCED ALUMINA MATRIX COMPOSITE PROCESSED BY POWDER METALLURGY
Abstract: Metal matrix composite has a wide variety of applications in field of aerospace industry, automotive and military application. This paper focuses on developing a new composite and characterization for determining the mechanical properties of composite. SiO2 particulate reinforced alumina matrix composite is to be developed by combining alumina as matrix and SiO2 as reinforcement phase with help of poly vinyl alcohol as binder. Compaction pressure and sintering temperature is varied …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 2, 2018 · pp. 7–11 Read article
-
STUDIES ON WEAR BEHAVIOR OF BORON CARBIDE PARTICULATES REINFORCED ALUMINUM 7075 METAL MATRIX COMPOSITES
Abstract: In this present work, Aluminum 7075 is used as matrix material with Boron Carbide asreinforcement. Two different compositions were used to prepare the composite. The composites werefabricated by Stir Casting Technique as per ASTM G99 and tested under Pin-on-Disc wear test rig. Theexperiments are conducted through conventional method and macro structural studies were carried out bySEM analysis. The results show that, in conventional method, the reinforced composite Aluminum 7075-10%B 4 …
Published in Journal of Polymer & Composites · Vol. 7, Issue 2, 2019 · pp. 1–7 Read article
-
Wear Behavior of Al-Alloy (Al-5 Mg) in-situ Reinforced TiB2 Particulate
Abstract: A research has been carried out for replacing Al monolithic alloys by aluminium (Al) based metal matrix composites (MMCs) in many engineering applications where high wear resistance and stiffness are required. In this paper, the investigated dry sliding wear behavior of TiB2 particulate reinforced composite of Al-Alloy (Al-5 Mg) is discussed. The in-situ Al-Alloy (Al-5 Mg) 10wt% TiB2 composite material were prepared by molten flux reaction synthesis using electric melting …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 3, 2014 · pp. 32–37 Read article
-
Effect of Solutionizing and Ageing on Mechanical Properties of AL2024 Reinforced Alumina Particulate
Abstract: AbstractAluminium 2024 alloy is widely used at automobile and aircraft industries in the form of cast component with varying section size. This study investigates how the microstructure and mechanical properties of AL2024 alloy before and after heat treatment processes. Solution sing at 493°C-5H followed quenching in water at room temperature. Stir casting method is followed to obtain the required composite material with proper mixing of reinforcement. Further, the mechanical properties …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 3, 2018 · pp. 8–12 Read article
-
Composite Fabrication by Stir-Cast for Al C355.0 With Particulates Hematite Reinforcements at Different Weight Percentages in Copper Chills with and Without Water Circulation for Mechanical and Fatigue Performance
Abstract: This study investigates the fabrication of aluminum matrix composites using the stir casting method to analyze the mechanical characterization and fatigue behavior of Al C355.0 composites reinforced with varying weight percentages of hematite particulates. The hematite content was systematically adjusted from 0 wt. % to 12 wt. % in 3 wt. % increments, with the presence of constituent elements confirmed through Energy Dispersive Spectroscopy (EDS). The incorporation of hematite reinforcement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 324–336 Read article
-
Characterization of Aluminum Metal-Matrix Composite with SiC and B4C Reinforcement with Different Weight Percentage
Abstract: Metal Matrix Composites (MMCs) have been prepared by compo casting method. The effect of matrix material on the wettability/compatibility of refinement with matrix is studied. Silicon and boron ceramic particles were used as reinforcement in aluminum matrices. The study of density, micro-hardness and the tensile strength has been done in order to characterize the same. It is found that Al-SiC MMC shows an increase in density with increasing weight percentage …
Published in Journal of Experimental & Applied Mechanics · Vol. 6, Issue 1, 2015 · pp. 1–6 Read article
-
Development and Characterization of Aluminum Alloy Reinforced with Hematite Particulate Composite for Automotive Application
Abstract: This study reviews the characteristics of aluminum alloy with Hematite particulate composite reinforced at different wt. % prepared by different casting methods through which we can achieve required hardness, wear resistance, microstructure and life extension of an automotive parts. This paper describes the chemical composition of different aluminum alloys and Hematite. SEM analysis is studied in order to determine the nature of the structure and Design of Experiments (DOE) using …
Published in Journal of Experimental & Applied Mechanics · Vol. 10, Issue 2, 2019 · pp. 7–11 Read article
-
Experimental investigations on mechanical properties of AL8081 reinforced with B4C particulate Mmc’s
Abstract: The aluminium metal matrix composites are becoming emerging and most versatile material. Aluminium MMCs are widely used since the applications involved in automotive, unique structural, defence and aerospace. At the elevated temperature levels, the potentiality of Aluminium MMCs is very high. The metal matrix composites (MMCs) mainly mitigate the weight ratio. In this article, the aluminium metal is conjugated with B4C particulates by stir casting approach. The stir casting method …
Published in Journal of Experimental & Applied Mechanics · Vol. 10, Issue 2, 2019 · pp. 12–16 Read article
-
Wear Characteristics of Aluminium-Graphite Composites Produced by Stir Casting Technique
Abstract: Metal matrix composites (MMCs) are finding more applications due to their significantly improved properties such as high specific strength, high specific modulus, good damping capacity and good wear resistance compared to unreinforced alloys. In recent years, there has been an increasing interest in composites containing low density and low cost reinforcements. Graphite is one of the most suitable and low density reinforcement available for making light-weight and wear resistant parts …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 3, 2014 · pp. 13–20 Read article
-
Dielectric Responses of Hybrid Polymer Matrix Composites at 2–3 GHz Microwave Frequencies
Abstract: AbstractMeasurement of dielectric properties of polymeric materials in the 2–3 GHz frequency region is very important for strategic applications such as communication electronics, rapid prototyping, and radiation assisted heating. As per international standards for industrial, scientific and medical applications (ISM) 0.9, 2.45 and 5.8 GHz microwaves can be used both for heating and communication purposes, of this 2.45 GHz is most widely used frequency, hence it is important to characterize …
Published in Journal of Polymer & Composites · Vol. 3, Issue 1, 2015 · pp. 1–11 Read article
-
Effect of Mixing Time on Mechanical Properties of Epoxy-Fly Ash Composite
Abstract: Particulate reinforced polymer composites have been designed to improve the (polymer) composite properties and with reduction of cost. In the present study, fly-ash is used as a filler material. Samples are made with different mixing times i.e. 5, 10, 15, 20, 25 and 30 min. Ultrasonic and magnetic mixing are the two ways to mix the particulate as fillers. The resulting mechanical properties such as flexural strength, tensile strength and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 5, Issue 2, 2015 · pp. 11–17 Read article
-
Recycling and Reinforcement of Retired EV Battery Materials in Polymer Composites for Sustainable Engineering Applications
Abstract: The rapid proliferation of electric vehicles (EVs) has led to a substantial increase in lithium-ion battery waste, necessitating sustainable strategies for material recovery and reuse. This review explores the valorization of retired Electrical Vehicle batteries within polymer and composite systems, highlighting second-life applications as a promising pathway toward circular material utilization. Batteries retaining 70–80% of their original capacity remain suitable for extended use; however, beyond conventional energy storage, their constituent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 362–371 Read article
-
Performance Based Seismic Evaluation of G+12 RCC Structures in Seismic Zone IV with and without Corner Shear Walls Considering Soil Types I, II, and III
Abstract: Seismic behavior of multi-storey buildings is significantly influenced by structural stiffness and supporting soil conditions. This study investigates the seismic response of a G+12 reinforced concrete building by comparing two structural configurations, namely buildings with shear walls and buildings without shear walls, under three soil conditions: Type I, Type II, and Type III soils. The analysis is carried out using the response spectrum method in accordance with IS 1893 (Part …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Fabrication and Mechanical Characterization of Hybrid Metal Matrix Composite Castings
Abstract: This work investigates and addresses the casting of a novel hybrid composite material with tungsten carbide and aluminum-silicate particles mixed at varying weight fraction rates. Production of hybrid composite has some advantages if it is processed by near net shape techniques. The simplest method for dealing with this hybrid composite is the turbulence produced by the vortex agitating technique. The vortex mixing method is used in this study to create …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 3, 2024 · pp. 32–38 Read article
-
Performance of GFRP Bars in Flexural Members: A Comparative Study with Metal Bars Using FEA and Experimental Study
Abstract: In recent years, GFRP bars have been introduced as a replacement for metal bars as reinforcement in flexural members. This study evaluates the use of GFRP bars as the main reinforcement in flexural members such as beams through computer simulations and experimental work. A 4-meter beam from a sample structure, analyzed as per IS 875 (1987) Part 2, was considered for the study. This beam was designed considering both metal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 262–267 Read article
-
Analysis of Properties of Copper-Alumina Composites Produced by Various Processing Routes: A Review
Abstract: The metal matrix composites (MMCs) are of keen interest in the recent years because of their pervasive application in automotive and aerospace industries .This paper summarizes the Cu/Al2O3 composites prepared by various fabrication routes and their results. The copper-alumina MMCs are gaining importance increasingly and act as good alternatives to be used for functional applications mainly microwave tubes, electrical equipment, high temperature conductors, automobile and aerospace industries. Cu/Al2O3 composites have …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 30–42 Read article
-
Physical and Mechanical Characterization of Boron carbide(B4C) and waste granite dust reinforced hybrid aluminium composite.
Abstract: In this particular study the concussion of B4C and waste granite dust reinforced on AA6082-T651 hybrid aluminium matrix composite (AMCs)which was fabricated using the stir casting process was investigated.These reinforcements were mixed and varied in the ratio of 1:0,0:1,1:1,1:3,3:1 respectively in the aluminium metal matrix composite .The physical and mechanical characterization of these AMCs were investigated.The obtained results indicate that the density of the composite XCM-5 increased by increasing the …
Published in Journal of Automobile Engineering and Applications · Vol. 8, Issue 2, 2021 · pp. 17–26 Read article