Search
126 articles for “microstrip”
-
Analysis of Swastika (Mythological Symbol) Shaped Split-Ring Resonators and Complementary Split-Ring Resonators Coupled to Planar Microstrip Transmission Lines and Microstrip Patch Antenna
Abstract: AbstractHere in this paper, we have developed a new kind of metamaterial unit cell in the shape of a Hindu mythological symbol ‘Swastik’. Here we designed and analyzed the behavior of split ring resonators (SRRs), complementary split ring resonators (CSRRs) and microstrip transmission line. Here we also investigated the electromagnetic behavior of microstrip transmission line coupled with metamaterial unit cells. The proposed analysis is useful to design the compact microwave …
Published in Current Trends in Signal Processing · Vol. 8, Issue 1, 2018 · pp. 10–22 Read article
-
Circularly Polarized Compact Wide Slot Microstrip-Fed Antenna for Wideband Applications
Abstract: Abstract: This paper presents a circularly polarized (CP) compact wide slot microstrip–fed antenna for wideband applications. Inverted L-shape protruding stub from the ground plane towards the center of slot permits to obtain AR <3dB. Wide slot fed with an offset microstrip feedline at an offset distance d, beneath the protruded stub. Proposed CP wide slot (WS) antenna is designed with compact size of 25 mm x 25 mm. Simulated results …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 1, 2019 · pp. 6–12 Read article
-
A Multiband Microstrip-fed Slot Antenna for ITS/WLAN/WiMAX & IEEE 802.11a Application
Abstract: A microstrip-fed slot antenna for multiband operation is proposed. The antenna is printed on silicon substrate with thickness of 1.6 mm and dielectric constant of 11.9. A simple 50Ω microstrip line is used to excite the antenna. Small rectangular slots are fabricated on substrate to achieve multiband operation of 2.34–2.44, 3.73–3.77, 3.97–4.05, 4.59–4.79, 5.14–5.26, 5.49–5.57, 5.71–5.8 and 5.86–5.95 for lS1 1l ≤ −10dB. The designing has been done in IE3D …
Published in Journal of Electronic Design Technology · Vol. 4, Issue 1, 2013 · pp. 1–4 Read article
-
Gain Enhanced 2.4 GHz Slotted Rectangular Microstrip Patch Antenna with FR-4 Epoxy Substrate
Abstract: Applications that use the Internet of Things (IoT) must be combined with wireless networking technologies. This makes it easy to get to the application data. The wireless communication system is a key part of the infrastructure for the Internet of Things. It acts as a bridge for two-way connections to gather data and send control messages. In this work, HFSS software is used to create a rectangular microstrip patch antenna …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 1, 2023 · pp. 20–26 Read article
-
A Review on Parasitically Coupled and a Direct Coupled Feed for a Microstrip Antenna Array
Abstract: Due to modern electronics, small size electronic systems have been increasing in integrated circuits and the physical size of systems is reduced. Hence, demand of small and low cost antennas has increased. Microstrip or patch antenna provides the lightweight, not expensive, and integration is easy. Microstrip antennas or patch antennas are one of the most attractive antennas for integrated systems and are widely used in wireless communication systems. This paper …
Published in Journal of Communication Engineering & Systems · Vol. 8, Issue 1, 2018 · pp. 15–18 Read article
-
Design and Simulation of Triple Band Microstrip Patch Antenna for Ku-band, K-band and Ka-band Applications
Abstract: AbstractThis paper represents a microstrip patch antenna for future 5G-communication technology. The proposed antenna designs are simulated and their performances are analyzed for different parameters like lower return losses, higher gain, voltage standing wave ratio (VSWR), current distribution, far field radiation and wide bandwidth performance for the tri-frequency band operation in Ku band (12–18 GHz),K-band (18–27 GHz) and Ka-band (27–40 GHz) as per the specified IEEE standard. The proposed antenna …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 7, Issue 1, 2020 · pp. 26–33 Read article
-
Two Parabolic Shape Microstrip Patch Antenna for Single Band Application
Abstract: AbstractIn this article, a two parabolic shape Microstrip textile antenna has been simulated under CST Software using bending material i.e. Jeans. The dielectric constant of Jeans material is 1.7. For antenna to be wearable, Jeans substrate is used. The return loss of Two Parabolic shaped patch antenna is –43 dB at 7.618 GHz resonant frequency. It covers the bandwidth from 5.386 to 8.971 GHz. In this paper, simulated results like …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 1, 2018 · pp. 33–36 Read article
-
A Survey on Recent Microstrip Patch Antenna for Navigational Application
Abstract: ABSTRACTSince last so many years microstrip patch antenna is one of the important fields for antenna design. For a different application of satellite communication in which prize, structure simple installation process is one of the key requirement low profile antenna is good to consider. Microstrip antennas is also fulfill the requirements of mobile communication as well as wireless communication. For navigational application the few important parameters are there like compact …
Published in Journal of Communication Engineering & Systems · Vol. 9, Issue 1, 2019 · pp. 55–59 Read article
-
Microstrip Patch Antenna for Dual Band Application
Abstract: AbstractThis paper presents a rectenna that is designed and simulated to power the wireless sensor systems at 3.12 GHz. The antenna substrate is designed with glass epoxy. The rectenna circuit has been simulated on the glass epoxy and RF-to-DC conversation is investigated for power level –5 dBm. The presented antenna has the impedance bandwidth of 58.34%, i.e. from 2.61 to 4.76 GHz with a gain of 2.67 dBi.Keywords: Rectenna, RF-to-DC, …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 1, 2018 · pp. 25–28 Read article
-
A Review on Quad Band Microstrip Antenna for GSM and GNSS Application
Abstract: Micropstrip or patch antennas are also known as a printed antenna fabricated on printed circuit board (PCB). Microstrip antennas are low cost, have a low profile, low weight and are easily fabricated [1]. They are used atmicrowave frequencies. In this review paper, a survey on quad band operations in patch antenna papers, which have been used by authors for designing of low profile, small compatible patch antenna, have been presented. …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 1, 2017 · pp. 1–5 Read article
-
Survey on Fractal Microstrip Antenna for Multiband 5G Application
Abstract: In the paper, a two-iteration fractal structure antenna—based on the advantages of fractal geometry and incorporating the principles of conventional microstrip antenna design and resonant coupling technique—is studied for third generation (3G), fourth generation (4G), fifth generation (5G), WLAN, and Bluetooth wireless applications. Antenna radiators were shown to have a fractal structure, much like a tree in the wild. The length of the radiator in a limited space can be …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 3, 2023 · pp. 16–22 Read article
-
E-Shaped Microstrip Patch Antenna for High Speed Wireless Local Area Network (WLAN) Applications
Abstract: A microstrip antenna consisting of E-shape radiating patch having low profile, probe-fed is designed and proposed for wireless local area networks (WLAN) applications. All countries use different WLAN, as the antennas available are not able to cover all the standards. This study aims to design a smallest antenna with better polarization covering all high speed WLAN standards ranging from 4.47 to 5.82 GHz. The patch antenna designed on low cost …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 4, Issue 1, 2017 · pp. 1–5 Read article
-
Ultra-Wideband Monopole Microstrip Filtenna with Hairpin Structure for Wireless Application
Abstract: Microstrip filtenna for WiMax/LTE and WLAN band has been proposed and presented. This paper presents design of bandpass filter having hairpin structure which is incorporated into the feedline. The FR4 substrate is used for the proposed antenna. The proposed filtenna has been designed and investigated using HFSS simulator. The proposed filtenna operates at 3.2 GHz. From the simulation results, it is extracted that passband of hairpin filter structure is from …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 7, Issue 1, 2019 · pp. 25–29 Read article
-
Performance Enhancement of Microstrip Patch Antenna Using Metasurface
Abstract: Performance enhancement of microstrip patch antenna using metasurface provides a thorough analysis of how a metasurface integration technique might improve the performance of a microstrip patch antenna. The 4×4 array of square components metasurface measuring 51.6 × 51.6 × 3.1016 mm is merged with the microstrip patch antenna, which has dimensions A=13.5 mm, B=12 mm, and C=1.2 mm. The radiation box dimensions (100 mm × 100 mm × 55 mm), …
Published in Journal of Microwave Engineering and Technologies · Vol. 11, Issue 3, 2024 · pp. 20–27 Read article
-
Effect of Partial Ground Plane on the Microstrip Patch Antenna Performance for Wireless Sensor Networks
Abstract: Wireless sensor networks have a number of tiny nodes. Each node has the ability to communicate with its neighbors. The communication range depends on the type of antenna used. This paper analyzes the performance of microstrip patch antenna which suppresses the surface waves from the edges of the ground-plane of the substrate. The microstrip patch antenna is designed using a substrate of dielectric constant εr = 2.2 and loss tangent …
Published in Journal of Electronic Design Technology · Vol. 4, Issue 3, 2013 · pp. 5–9 Read article
-
Design and Analysis of Rectangular Microstrip Antenna (RMSA) for Millimeter Wave Applications
Abstract: Millimeter-wave (MMW) communication is a key technology for next-generation wireless applications. However, the antenna design for such applications at the MMW band is a critical challenge. In this paper, the design and performance analysis of a Compact Rectangular Microstrip Antenna for Millimeter Wave Communication applications has been presented. The design has been carried out at 33.5 GHz and the antenna design parameters have been optimized to achieve the optimum characteristics. …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 2, 2019 · pp. 6–13 Read article
-
Design of Advanced Microstrip Patch Antenna for Wearable Application
Abstract: AbstractThis paper presents the review on design of wearable microstrip patch antenna at the operating frequency of 2.4 GHz for wearable application. This work presents a method of applying the combinational between wearable electronics and antennas. Textile antennas are the most interesting research. In telecommunications, microstrip patch antenna is increasing in recent years consequently textile antennas are increasingly demanding. Microstrip patch antenna is an ideal choice for integrated into clothes …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 3, 2019 · pp. 18–22 Read article
-
An Extended Semi-circular Microstrip Patch Antenna with DGS for UWB Applications
Abstract: This paper presents the design of a semicircular patch with an extended length for UWB applications. The proposed antenna is fabricated on FR4 substrate with relative permittivity of =4.4 and dimensions of 29.5x38x1.57 . The feed used in proposed design is 50 Ω microstrip feed line. The partial ground structure with a T-shaped slot and dual right angled isosceles triangular notches of side 3 mm each has been introduced to …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 1, 2017 · pp. 13–18 Read article
-
Performance Analysis of Proximity Coupled Microstrip Patch Antenna with DGS and EBG
Abstract: The objective of this paper is to analyze the effect of Defected Ground Structure (DGS) in a Proximity Coupled Microstrip Patch Antenna (PCMA) and the effectiveness of using this structure in a PCMA with an Electromagnetic Bandgap Structure (EBG). The EBG structure used is a metallo-dielectric structure having a printed metallization with connected via ground plane. This manoeuvering of EBG enabled PCMA with a dumbbell shaped DGS results in a …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 3, 2015 · pp. 1–8 Read article
-
Split Ring Resonator Based Dual Frequency Microstrip Patch Antenna For Wireless Applications
Abstract: The objective of the work is to design a compact dual frequency microstrip antenna (MSA) at GSM 1800 MHz and ISM (2.4 GHz). The proposed MSA incorporates a rectangular patch with an inverted U slot printed on the top of RT duroid 5880 substrate with thickness of 0.8mm and dielectric constant of 2.2. The dimensions of the patch are optimized as 45x 54 mm2. It is fed by coaxial feeding. …
Published in Journal of Microwave Engineering and Technologies · Vol. 9, Issue 2, 2022 · pp. 1–14 Read article