Search
59 articles for “interfacial interaction”
-
MXene-Infused Conductive Nano-Polymers for Edge-Computing Enabled Flexible Environmental Monitoring Devices
Abstract: MXene-infused conductive polymer composites have emerged as highly promising materials for next-generation flexible environmental monitoring devices because they combine electrical conductivity, mechanical flexibility, analyte sensitivity, and compatibility with low-power electronics. In this work, a Ti₃C₂Tₓ MXene–TPU/PVA conductive nano-polymer composite was developed as a multifunctional sensing platform for edge-computing enabled environmental monitoring. The composite was fabricated by dispersing MXene nanosheets into a thermoplastic polyurethane/poly (vinyl alcohol) (TPU/PVA) matrix, coating the conductive …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 298–309 Read article
-
Synthesis of Graphene-CeO2 Nanocomposite with Enhanced Electrochemical Properties
Abstract: For the fabrication of graphene–cerium oxide (CeO₂G) composites, 99 mg of cerium oxide (CeO₂, 99.9%) was uniformly dispersed in 100 mL of deionized water via ultra-sonication (40 kHz) to achieve a stable suspension, followed by the incorporation of 1 mg of synthesized graphene. The resulting mixture was maintained at ambient temperature (25 ± 2 °C) under continuous magnetic stirring at 500 rpm for 2 h to promote effective interfacial interaction …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1355–1373 Read article
-
Thermo-Mechanical Properties of Unsaturated Polyester Reinforced with Coconut and Snail Shells
Abstract: AbstractParticulate-filled polymer composites are becoming quite attractive because of their low cost and wide applications. In this study, the effects of coconut shell (CS) and snail shell (SS) volume fractions (5–50 vol. %) on the thermal and mechanical properties of unsaturated polyester resin (UPR) composite are investigated. The results show that tensile strength, elongation at break, flexural strength, and hardness of the composite increase as filler concentration increases. However, impact …
Published in Journal of Polymer & Composites · Vol. 2, Issue 2, 2023 · pp. 44–56 Read article
-
Mechanical and Functional Performance of PET–Kenaf Fiber Hybrid Composites for Domestic Household Applications
Abstract: This research presents a hybrid composite of recycled polyethylene terephthalate (PET) and Kenaf fibers for sustainable household applications. Polyethylene terephthalate from consumer bottles was reinforced with Kenaf fibers at volume fractions of 10–30% and composites were created through compression molding. Mechanical characterization involved tensile, flexural, impact, and hardness testing where appropriate and was standardized according to ASTM standards, while their interfacial interactions were characterized by imaging through SEM. Linear and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1482–1498 Read article
-
In-Situ Polymerized GO/PANI Composites: Structural Evolution, Optical Modulation, and NH₃ Sensing at Room Temperature
Abstract: Graphene oxide (GO)/polyaniline (PANI) composites with varying PANI contents (20, 40, and 60 wt%) were synthesized via in-situ oxidative polymerization and systematically investigated for their structural, morphological, optical, and gas-sensing properties. X-ray diffraction (XRD) confirmed a progressive increase in interlayer spacing and partial exfoliation of GO layers with increasing PANI content, indicating intercalation-assisted hybridization. Fourier transform infrared (FTIR) spectroscopy revealed the characteristic vibrational bands of both constituents and confirmed strong …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 509–525 Read article
-
Enhancing Delamination Resistance in CFRP Composites through surface Functionalization of Woven carbon Fiber by CuO Nanostructures
Abstract: In order to produce a nanostructured interphase that improves the interfacial interaction with an epoxy resin matrix, copper oxide (CuO) nanostructures were hydrothermally formed onto woven carbon fibers (WCF). Hexagonal CuO nanorods were created using a two-step, seed-assisted solvothermal technique on plain woven carbon fiber. This study investigates the effects of surface modification of carbon fibers by the formation of CuO nanostructures using a hydrothermal technique on the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 589–602 Read article
-
Advanced Functional Nanocomposites: Graphene Oxide Integration into Polyvinyl Alcohol Matrix
Abstract: This research explores how incorporating graphene oxide (GO) into polyvinyl alcohol (PVA) can improve its mechanical and thermal characteristics, with the goal of creating multifunctional nanocomposites suitable for advanced technological applications. GO was introduced into the PVA matrix at 0.5, 1, and 2 wt% via a scalable solution casting method. The resulting nanocomposites were characterized mechanically, thermally, and spectroscopically. Tensile testing revealed a significant improvement in mechanical performance, with tensile …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 50–59 Read article
-
Thermo-Mechanical and Electrical Properties of Multi-Walled Carbon Nanotube-Enhanced Polyimide Composites for Aerospace Thermal Protection Systems
Abstract: Advanced aerospace thermal protection systems (TPS) require multifunctional materials that simultaneously provide high thermal stability, mechanical strength, and reliable electrical performance. Polyimide (PI) is widely used in aerospace structures due to its lightweight design and exceptional thermal durability, yet its low thermal conductivity and insulating behavior limit its effectiveness in heat dissipation and electromagnetic interference (EMI) shielding applications. This study addresses these limitations by developing multi-walled carbon nanotube (MWCNT)-reinforced polyimide …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 966–982 Read article
-
Structure-Property-Process Relationships in BNNS-Modified PEEK Nanocomposites for High-Performance Applications
Abstract: This study reports the design and performance evaluation of boron nitride nanosheet (BNNS)-reinforced polyetheretherketone (PEEK) nanocomposites fabricated using melt compounding and high-temperature Fused Filament Fabrication (FFF). PEEK, a high-performance thermoplastic, was reinforced with BNNS at 0.5–5wt.% to enhance mechanical, thermal, and tribological functionalities for advanced engineering use. Composite filaments were extruded and printed using a modified Bambu Lab FFF printer. Mechanical testing revealed a peak tensile strength of 108 MPa …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 867–888 Read article
-
Unification and DC Conductivity of PDMS/NiNPs Nanocomposite
Abstract: The DC conductivity of nickel nanoparticles–polydimethylsiloxane (NiNPs–PDMS) composite materials has attracted considerable attention due to their promising applications in flexible electronics, sensors, and energy storage devices. The electrical performance of these composites is largely governed by the formation of conductive networks within the insulating polymer matrix. Incorporating nickel nanoparticles into PDMS introduces conductive pathways that significantly enhance DC conductivity once a critical percolation threshold is reached.Several key factors influence the …
Published in Research & Reviews : Journal of Physics · Vol. 15, Issue 1, 2026 · pp. 28–37 Read article
-
Polymer Electrolyte Films Doped with Nanofillers ZnO: Electrochemical and Optical Investigations
Abstract: The electrochemical and optical characteristics of polymer composite electrolyte films doped with zinc oxide (ZnO) nanofillers are thoroughly examined in this work. Because of its superior film-forming capacity, flexibility, and ionic transport properties, poly(vinyl alcohol) (PVA) mixed with potassium iodide (KI) is used as the host polymer electrolyte. To investigate their effects on ionic conductivity, dielectric behavior, and optical transmission, ZnO nanoparticles are synthesized and added to the PVA–KI matrix …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 320–332 Read article
-
Bioinspired Nanocomposite Bone Pins: Fabrication, Evaluation, and Suitability for Orthopedic Implant Applications
Abstract: Bone tissue engineering (BTE) requires scaffolds that mimic bone’s mineral–organic composition, offering mechanical strength, bioactivity, and degradation rates compatible with regeneration. Conventional metallic implants face corrosion and toxic ion release risks, while ceramics like hydroxyapatite (HAp) are bioactive but brittle. This study reports a multifunctional hybrid scaffold combining HAp for osteoconductivity; polycaprolactone (PCL) and collagen for flexibility and biocompatibility with sodium citrate for nanoparticle dispersion, ferrocene (Fc) for catalytic bioactivity; …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 526–540 Read article
-
Tailoring The Electrochemical Interface of Graphene–Gd₂O₃ Nanocomposites for Advanced Energy Storage
Abstract: Graphene–Gd₂O₃ nanocomposites were synthesized by incorporating varying concentrations of reduced graphene oxide (rGO) into Gd₂O₃ using a straightforward room-temperature solution method. The composites were analyzed using various distinct characterization techniques, including X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). Electrochemical measurements, particularly cyclic voltammetry (CV), demonstrated that the incorporation of graphene significantly enhanced the electrochemical performance …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 369–388 Read article
-
Implement Explainable Machine Learning to Improve Conductivity in Polymer-CNT Nanocomposites: Supporting Adaptive, Flexible, and Long-Lasting IoT Wrap-Around Electronics Applications
Abstract: The rapid growth of Internet of Things (IoT) technologies requires electronic components that are adaptable, lightweight, and durable, and that can continue to function well in diverse contexts and circumstances. Polymer–carbon nanotube (CNT) nanocomposites have become interesting choices for these kinds of uses because they are more flexible, conduct electricity better, and can be made to fit specific needs. However, improving conductivity in these heterogeneous systems remains a major challenge …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 238–254 Read article
-
High-Performance Carbon Nanotube-Reinforced Biodegradable Polymer Composites for Packaging
Abstract: The growing issues concerning the properties of petroleum-based plastics on the environment increased the demand for biodegradable alternatives and polylactic acid (PLA) is one of the most promising options available. However, its poor toughness, thermal resistance, and barrier properties limit broader applications in sustainable packaging. This study reports the fabrication and characterization of PLA-based nanocomposites reinforced with carbon nanotubes (CNTs) at varying loadings (0.1-2 wt.%). Structural analysis (FTIR, XRD) confirmed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 183–194 Read article
-
Investigating the Mechanical Properties and Microstructure of AA 7074 Composites with Silicon Nitride Reinforcement
Abstract: This study investigates the mechanical and microstructural properties of AA 7074 aluminium alloy reinforced with 1%, 3%, and 5% by weight of silicon nitride (Si₃N₄), fabricated via the stir casting method, intended for structural aerospace applications. A thorough series of mechanical tests—comprising tensile, compression, hardness, impact, flexural, and wear tests—was performed to assess the influence of differing reinforcing content. The composite containing 5 wt% Si₃N₄ (SN5) demonstrated the most pronounced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 268–281 Read article
-
Polymer-Mediated Electron Transfer in Eco-Friendly P3HT–rGO Nanocomposites for Optoelectronic Applications
Abstract: Conducting polymer–graphene hybrid nanocomposites have emerged as promising materials for next-generation optoelectronic applications owing to their solution processability, tunable interfacial properties, and mechanical flexibility. Recent studies have highlighted the importance of graphene–polymer hybrid systems in enhancing charge transport pathways, exciton dissociation efficiency, and interfacial stability in organic optoelectronic devices. Despite these advantages, a key challenge remains the efficient production of individual graphene sheets through the reduction of graphene oxide using …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 413–423 Read article
-
A Review on Hybrid Inorganic–Polymer Analog Nanocomposites Incorporating Pozzolanic Wastes and nano-Additives
Abstract: The recent progress of polymer matrix nanocomposites (PMNCs) reveals that the performance of matrix and filler is at the core of matrix–filler interaction, interfacial bonding, and well-controlled distribution of nanoscale reinforcements. Applying these concepts, we consider inorganic particulate systems as hybrid nanocomposites, in which a discontinuous inorganic matrix is effectively reinforced via synergistic co-incorporation of pozzolanic wastes and nano-additives. In the composite system described above, silica-, alumina-rich pozzolanic materials serve …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 131–141 Read article
-
Effect of Surface Modification on Properties of Kevlar/Epoxy Polymer Composites
Abstract: In this study, a high-performance Kevlar/epoxy polymer composite was prepared using a hand lay-up technique. The Kevlar fiber was treated with calcium chloride/ethanol solution (CaCl2/EtOH) to enhance the interfacial interaction between the fiber and the epoxy matrix. The optimization of fiber surface treatment and fiber content for the best tensile strength (TS) of Kevlar/epoxy polymer composite was achieved using Box-Behnken design (BBD) through response surface methodology (RSM). Three parameters: CaCl2 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 35–46 Read article
-
Fabrication and Surface Modified Non-woven Calotropis gigantea Fiber Mat Reinforced Polypropylene Composites by Film Stacking Method
Abstract: Nowadays, there is a growing environmental consciousness and awareness about the need for sustainable development, which has led to growing interest in using natural fibers as reinforcement in polymer composites for synthetic fiber substitution. The current work deals with the effects of Calotropis gigantea fiber (CGF) content and chemical modification of CGF mats by treatment with sodium dodecyl sulfate (SDS) and SDS-pretreated benzoyl chloride on the fundamental properties of CGF-filled …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 1, 2022 · pp. 10–22 Read article