Search
194 articles for “high-temperature composites”
-
Study of Ablation Characteristics Carbon Fiber Reinforced Plastic with Silicon Carbide Pores
Abstract: Significant thermal stress is placed on spacecraft during atmospheric re-entry, primarily due to aerodynamic heating. This intense heat can cause severe material damage threatening the spacecraft's structural integrity. To address this challenge, efforts are focused on improving the ablation resistence of spacecraft components. In this work, carbon fiber reinforced plastic (CFRP) composites containing silicon carbide (SiC) holes are explored as a potential solution for enhancing thermal protection system. Four different …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 617–627 Read article
-
Effect of Heat Exposure on Structural Integrity of Geopolymer Concrete Composites
Abstract: The research evaluates the thermal degradation effects of high temperatures on Geo Polymer Concrete Composite (GPCC) by examining alccofine concrete, concrete made with alccofine and porcelain waste aggregates. Knowing how GPCC behaves under high temperatures proves essential for protecting buildings during fires as well as industrial applications. Each mix design received composite concrete samples that underwent increased heating conditions from 100°C to 700°C at 200°C intervals. Post-heating, various parameters were …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 318–328 Read article
-
Influence of Static Sequences on the Thermal Behavior of Eco-Friendly Pineapple/Ramie Composites
Abstract: The increasing demand for sustainable and environmentally responsible materials has driven the exploration of natural fiber-reinforced polymer composites as potential alternatives to conventional synthetic materials. Among various natural fibers, pineapple leaf fiber (PALF) and ramie fiber are notable for their complementary characteristics—PALF offers excellent insulating behavior and lightweight structure, while ramie provides high thermal stability and strength. In the field of Eco-friendly composite product manufacturing, the processing temperature holds significant …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 732–742 Read article
-
Metamaterial-Based Thermal Shielding Structures for Reusable Hypersonic Space Transportation Systems
Abstract: The rapid development of reusable hypersonic space transportation systems has intensified the need for advanced thermal protection technologies capable of withstanding extreme aerodynamic heating conditions encountered during atmospheric re-entry and sustained hypersonic flight. Conventional thermal shielding materials often suffer from high structural weight, limited adaptability, thermal fatigue, and degradation under repeated thermal cycling. This study proposes a novel Metamaterial-Based Thermal Shielding Structure for Reusable Hypersonic Space Transportation Systems, integrating engineered …
Published in Journal of Aerospace Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Experimentation and Investigation of E - Glass Fibre/ Polyester Composites Laminates
Abstract: This paper centres on the autoclave moulding technique, offering a comprehensive analysis of the specimen fabrication process. The advanced composite manufacturing process involves the use of high temperatures and pressures during the curing step. This results in composite specimens that have a higher density and are devoid of any voids. Polyester, E-glass fibre, and SiC powder are the material components that make up the composite in this study. It is …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 477–487 Read article
-
Structure–Property Relationships in Poly (N isopropylacrylamide) Hydrogels: Toward Thermoresponsive Polymer Composites
Abstract: Poly(N-isopropylacrylamide) (PNIPAAm) hydrogels can shift from solid to gel and back again at body temperature. Due to their lack structural integrity, thermal stability, and mechanical strength, they are difficult to use. This study mixed PNIPAAm with biocompatible fillers like chitosan and silicon nanoparticles to create hydrogels with superior structure-property correlations. Free radical polymerization with ammonium persulfate/TEMED initiator and N,N′-methylenebisacrylamide crosslinker produced the composites. Scanning electron microscopy showed a denser, interconnected …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 884–895 Read article
-
MHD-Assisted Flow Regulation of Viscoelastic Polymer Fluids for Industrial Cooling and Composite Fabrication with Isotherml Plates
Abstract: This study investigates the magnetohydrodynamic (MHD) regulation of viscoelastic polymer fluid flow over a permeable plate, emphasizing its relevance to industrial cooling and composite fabrication. An incompressible, electrically conducting viscoelastic fluid is analyzed under a transverse magnetic field with Hall and ion-slip effects to capture electromagnetic alterations in polymer transport. The governing non-dimensional equations for momentum, temperature, and concentration are solved analytically using the perturbation method. The results show that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 851–866 Read article
-
Thermal and Electrical Performance of Aluminum-Reinforced GFRP Composites
Abstract: This work examines an economical approach to improve the thermal load protection of Glass Fiber Reinforced Polymer (GFRP) composites, commonly utilized in aircraft constructions, pressure containers, and electrical insulators. Notwithstanding their superior mechanical capabilities, GFRP composites are susceptible to elevated temperatures and electrical currents, frequently resulting in considerable structural deterioration. The study introduces an innovative method employing aluminum reinforcement to enhance the thermal conductivity and protection of GFRP composite laminates. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1062–1075 Read article
-
Comprehensive Review of Composite Materials: Classification, Manufacturing Methods, Mechanical Behavior, Failure Modes, and Emerging Applications
Abstract: Composite materials have emerged as one of the most significant classes of engineered materials due to their ability to deliver high strength to weight ratios, enhanced durability, and tailored multifunctionality. Over the past two decades, rapid progress in polymer chemistry, advanced reinforcement architectures, additive manufacturing, and automated fabrication has expanded the applicability of composites across aerospace, automotive, biomedical, civil, and renewable energy sectors. This paper provides a comprehensive review of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 923–939 Read article
-
In-Situ Polymerized GO/PANI Composites: Structural Evolution, Optical Modulation, and NH₃ Sensing at Room Temperature
Abstract: Graphene oxide (GO)/polyaniline (PANI) composites with varying PANI contents (20, 40, and 60 wt%) were synthesized via in-situ oxidative polymerization and systematically investigated for their structural, morphological, optical, and gas-sensing properties. X-ray diffraction (XRD) confirmed a progressive increase in interlayer spacing and partial exfoliation of GO layers with increasing PANI content, indicating intercalation-assisted hybridization. Fourier transform infrared (FTIR) spectroscopy revealed the characteristic vibrational bands of both constituents and confirmed strong …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Parametric optimization of COF of fabricated AA6082/Si3N4/C/Al2O3 composite
Abstract: In the present experimental investigation AA6082/Si3N4/C/Al2O3 composite was successfully fabri-cated using stir casting technique combined with electromagnetic stirrer for wear resistance applica-tions. The produced AA6082/Si3N4/C/Al2O3 composite exhibits improved tribological and me-chanical and properties, according to the experimental results. The generated composite has a micro-hardness range of 60 to 110 HV and an average UTS of 150 to 200 MPa. The tribological perfor-mance was evaluated using a pin on disc tribometer. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 144–152 Read article
-
Mechanical Behavioral Analysis of Sugarcane Bagasse, Coconut Fiber and Kevlar Fiber Reinforced Composite with Micrographs
Abstract: Asbestos and alloys are materials that are frequently used as brake pads; however, because these materials pose risks to human health and the environment, including lung cancer, it is necessary to replace the materials used in brake pads. In place of the current brake pads, composite fibers such as kevlar, sugarcane bagasse, and coconut are studied in this study. The procedure of manually laying up composite molding is used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 282–296 Read article
-
Investigation of Mechanical Properties of Banana, Linen and Their Hybrid Reinforced Composite Laminates in Adverse Condition and Analyze Using ML
Abstract: This research investigates the mechanical performance of composite laminates reinforced with banana and linen fibers, focusing on both individual and hybrid fiber combinations. The primary objective is to assess how these natural fiber composites behave under extreme environmental conditions, particularly high humidity and fluctuating temperatures, which are common in aerospace and automotive applications.Key mechanical properties—tensile strength, flexural strength, and impact resistance—are experimentally evaluated to assess the performance and long-term reliability …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 25–31 Read article
-
Thermal and Morphological Characterization of Rice Starch–Charcoal Composites for Eco-Friendly Engineering Applications
Abstract: This work focuses on the development and evaluation of rice starch–charcoal–based composite materials to overcome the limitations of natural composites with low thermal properties. In order to examine the impact of filler concentration on thermal and structural performance, eight composite specimens were created by altering the ratios of rice starch and charcoal. TGA, DTA, AFM, SEM, and measurements of thermal conductivity and effusivity were used to thoroughly characterize the composites. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1286–1297 Read article
-
Exploration of Mechanical Characteristics and Microstructural Analysis of Copper Matrix Composites with Hybrid Reinforcements via Muffle Furnace Sintering
Abstract: Metal Matrix Composites (MMCs) have drawn a lot of interest in the area of innovative materials because of how widely they may be used. Due to their extraordinary qualities, such as high thermal conductivity, higher temperature endurance, improved corrosion resistance, and great weldability, copper matrix composites stand out among them. These qualities make them desirable and promising materials for uses including heat exchangers, automotive parts, and electrical components. In this …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 119–126 Read article
-
Unification and DC Conductivity of PDMS/NiNPs Nanocomposite
Abstract: The DC conductivity of nickel nanoparticles–polydimethylsiloxane (NiNPs–PDMS) composite materials has attracted considerable attention due to their promising applications in flexible electronics, sensors, and energy storage devices. The electrical performance of these composites is largely governed by the formation of conductive networks within the insulating polymer matrix. Incorporating nickel nanoparticles into PDMS introduces conductive pathways that significantly enhance DC conductivity once a critical percolation threshold is reached.Several key factors influence the …
Published in Research & Reviews : Journal of Physics · Vol. 15, Issue 1, 2026 Read article
-
Mn Doping–Induced Enhancement of Ethanol Gas Sensitivity in CuO/Cu₂O/Cu Composites
Abstract: A composite of CuO/Cu2O/Cu was synthesized by heating cupric acetate up to 600 °C for 2 hours in air. The properties of pure CuO films and CuO/Cu2O/Cu films were compared. Films were fabricated by the doctor blade method. Polyethylene glycol was used as a binder to prepare films. Mn was doped to composite to enhance the gas sensing properties. Compositions of Mn doped samples were confirmed using XRFS. According to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 52–61 Read article
-
Parametric optimization of residual stress of TiO2 composite coating
Abstract: The primary objective was to develop a composite coating by utilizing the HVOF thermal spray technique and including TiO2. The substrate was covered with a high-quality composite layer utilizing the HVOF coating process. The TiO2-based powder and carbon powder were initially combined in the mixer for deposition. The composite powders were applied via an HVOF torch, namely the PT F4 model. The firearm frequently produces a high-speed flow of extremely …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 295–301 Read article
-
Experimental Analysis of Wear Characteristics in Natural Fibre Composite Materials
Abstract: In mechanical systems, energy loss and material degradation due to attrition are frequently the consequences of sliding contacts, which frequently lead to premature system failure. In this study, at 50°C, 80°C, and 110°C, the hardness was tested; the results showed that the values were 350.7, 422.5, and 455.5 HV, respectively. After conducting a high-temperature wear test, the mass loss of the as-deposited composite coatings was assessed by an electrochemical approach …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 444–450 Read article
-
Improving the Mechanical and Interfacial Properties of Bhendi Fiber via Chemical Surface Treatments
Abstract: Because of its primary benefits—moderate strength and stiffness, low cost, and being a renewable, degradable, and ecologically friendly material—natural fibers are believed to have potential use as reinforcing agents in polymer composite materials. Due to their inherent hydrophilicity, they have a tendency to retain moisture, which can impair or soften the fibers' adhesion to the surrounding matrix. This can have an impact on the performance of composite materials used in …
Published in International Journal of Advance in Molecular Engineering · Vol. 3, Issue 1, 2025 · pp. 22–32 Read article