Search
76 articles for “heat transfer enhancement”
-
Enhanced Heat Transfer in Double Pipe Heat Exchanger with Circular Fins Using Copper Nanofluid and Twisted Tape Inserts: A Computational Study
Abstract: The enhancement of convective heat transfer in a double-pipe heat exchanger utilizing circular finned twisted tape inserts and helical screw-tapes with centre rods, in conjunction with copper oxide nanofluid as the heat transfer medium was studied in this project. Computational Fluid Dynamics (CFD) simulations were conducted across Reynolds numbers ranging from 500 to 5000 to analyse heat transfer characteristics. The investigation focuses on Nusselt number improvement and friction factor analysis …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 1, 2025 · pp. 11–22 Read article
-
Experimental Investigation on Heat Transfer Enhancement in Shell and Tube Heat Exchanger Using Graphene Nanofluids
Abstract: The paper focuses on the dispersion of Graphene nanoparticles in a water–ethylene glycol based fluid to investigate their impact on the convective heat transfer performance of the resulting nanofluid. Various concentrations of graphene nanoparticles were prepared, and the nanofluids were subjected to different ultrasonication durations to ensure proper dispersion and stability of the nanoparticles within the base fluid. The study involved extensive experimental evaluation to systematically analyze how the nanoparticle …
Published in Journal of Automobile Engineering and Applications · Vol. 12, Issue 3, 2025 · pp. 32–38 Read article
-
Numerical Investigation of Heat Transfer Enhancement in Micro-Channel Cooling Using Finite Element Analysis
Abstract: Due to the enormous heat fluxes emitted by modern electronic chips, there is a persistent need to enhance the efficiency of cooling systems. This study's focus is on optimizing heat transfer in micro-channel heat sinks that use liquid cooling. Geometric changes and the use of nano-fluids as coolants in place of water are performed to achieve this goal with little energy consumption. Numerical analysis of pipe micro-channel fluid flow and …
Published in International Journal of Energy and Thermal Applications · Vol. 1, Issue 1, 2023 · pp. 36–44 Read article
-
Corrugated Tube Shell-and-Tube Heat Exchanger Using Epoxy-Based Polymer Composite Coatings for Lightweight and Efficient Thermal Systems
Abstract: Corrugated tube geometries are widely recognized for their ability to enhance heat transfer through boundary layer disruption and secondary flow generation. In this study, a combined experimental and computational investigation is carried out to evaluate the thermo-hydraulic performance of a shell-and-tube heat exchanger incorporating corrugated stainless steel tubes integrated with an epoxy-based polymer composite coating and housed within a mild steel shell. Unlike conventional metallic systems, the present work introduces …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 603–617 Read article
-
Thermo-Hydraulic Enhancement of Annular Finned Shell-and-Tube Heat Exchangers Using Epoxy-Based Polymer Composites: A Material–Geometry Coupled CFD Investigation
Abstract: Shell-and-tube heat exchangers remain a backbone of industrial thermal systems, yet their performance is often limited by relatively low shell-side heat transfer and the weight and cost associated with conventional metallic components. In this context, the integration of polymer composite materials offers a promising pathway toward lightweight, corrosion-resistant, and performance-tunable heat exchanger designs. The present study investigates the thermo-hydraulic performance of a straight-tube shell-and-tube heat exchanger equipped with annular fins, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 669–684 Read article
-
Design of Evaporator and Condenser for Solar Adsorption Refrigeration System
Abstract: Solar adsorption refrigeration systems provide a promising alternative for sustainable cooling in regions with limited grid access and high solar availability because they can convert low-grade thermal energy into refrigeration without mechanical compression. The performance of such systems depends strongly on the thermal behavior of the evaporator and condenser, since these components govern the refrigerant evaporation rate, condensation effectiveness, and overall cycle stability. This paper presents focus on the design …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 13, Issue 2, 2026 · pp. 1–10 Read article
-
Thermo-Fluid Characterization of Corrugated U-Tube Shell-and-Tube Heat Exchanger with Polymer Composite Tube Wall: A Combined CFD and Experimental Investigation
Abstract: Shell-and-tube heat exchangers built with metallic tubes work well thermally, but corrosion problems, extra weight, and the inability to adjust the wall’s thermal properties through material choice remain genuine engineering headaches, particularly for corrosive or weight-critical applications. Over the past few years there has been a fair amount of interest in replacing metal tubes with polymer composite alternatives, since blending thermally conductive fillers — graphite nanoplatelets, boron nitride platelets and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Experimental and CFD Investigation of an Epoxy-Based Thermally Conductive Polymer Composite U-Tube Shell-and-Tube Heat Exchanger: A Lightweight Alternative to Conventional Metal Systems
Abstract: Shell-and-tube heat exchangers continue to play a critical role in industrial thermal systems; however, their conventional design based on fully metallic materials often leads to challenges related to weight, corrosion, and cost. In recent years, thermally conductive polymer composites have emerged as promising alternatives, offering improved corrosion resistance and design flexibility. In this study, the thermo-hydraulic performance of a U-tube shell-and-tube heat exchanger is investigated by partially replacing conventional metallic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 685–700 Read article
-
Investigation to Enhance Performance of Finned U-Tube Shell-and-Tube Heat Exchangers Using Epoxy Based Polymer Composite Material
Abstract: Shell-and-tube heat exchangers remain indispensable in thermal engineering systems; however, conventional metallic configurations often face challenges related to corrosion, weight, and limited thermal optimization. In this study, a novel approach is proposed by integrating epoxy-based polymer composite materials with finned U-tube geometries to enhance thermo-hydraulic performance while addressing material limitations of traditional systems. The work focuses on the development and evaluation of a hybrid heat exchanger comprising a mild steel …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 618–633 Read article
-
Entropy Analysis of Unsteady MHD Bioconvective Nanofluid between Parallel Disks under Squeezing Motion and Multiple Slip Conditions.
Abstract: This research offers valuable insights for improving heat transfer and minimizing entropy generation in engineering systems that involve nanofluids and microorganisms. It investigates the unsteady squeezing bioconvection flow of a nanofluid between two parallel disks, with a focus on entropy generation, flow dynamics, heat transfer, and the concentration of both nanoparticles and microorganisms. The lower disk is stretched horizontally and subjected to suction, while the upper disk moves vertically, creating …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 28, Issue 1, 2025 · pp. 17–40 Read article
-
An Experimental Investigation on the Determination of Critical Micelle Concentration (CMC) Of Various Surfactants Using the Surface Tension Method
Abstract: This study primarily focuses on the experimental investigation for determining the critical micelle concentration (CMC) of various surfactants that are commonly employed to enhance the stability of nanoparticles in base fluids. In this context, three surfactants belonging to the anionic category—Sodium Dodecyl Sulfate (SDS), Sodium Lauryl Sulfate (SLS), and the bio-surfactant Rhamnolipid—were selected, along with one non-ionic polymer, Polyvinylpyrrolidone (PVP), which is used as a surfactant. The CMC of each …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 145–153 Read article
-
Designing and Analysis of Different Types of Fins in Air Cooled Engine
Abstract: This paper is dedicated to the study of various shapes of extended surfaces, commonly known as fins, which are used on cylinder heads of internal combustion engines. Extended surfaces are used to improve heat dissipation from the object by increasing its effective surface area. Efficient heat dissipation is very important since proper cooling of an engine cylinder head helps to maintain optimal working temperatures, improves engine performance, increases service life, …
Published in Journal of Thermal Engineering and Applications · Vol. 13, Issue 1, 2026 · pp. 33–79 Read article
-
Enhancement of Horizontal Jet Impingement Heat Transfer Analysis on Vertical Flat Plate
Abstract: This research investigates the heat transfer characteristics and heat flux distribution associated with parallel jet impingement on a vertical flat plate. A comprehensive computational fluid dynamics (CFD) analysis is carried out and systematically validated against available experimental data to ensure the accuracy and reliability of the numerical model. The jet length is maintained constant at 12 mm, while the jet-to-plate separation distance is varied at 6, 12, 18, and 24 …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 1, 2026 · pp. 65–80 Read article
-
Thermal-hydraulic Behaviour of Corrugated Pipe Configurations
Abstract: Heat exchangers have a wide range of applications and can be found in a variety of different industries, including chemical reactors, nuclear power plants, and solar energy generation. It is required to do thermal optimization on heat exchangers in order to decrease the size, cost, and energy requirements of the heat exchangers while simultaneously improving their capacity to transmit heat. In these types of businesses, heat exchangers frequently make use …
Published in Journal of Polymer & Composites Read article
-
Significance of Nanoparticles in Phase Change Materials as Heat Transfer Fluid for Solar Heat Absorption
Abstract: The utilization of solar energy as a sustainable and eco-friendly power source has gained significant traction in recent years, with innovations constantly evolving to improve efficiency and effectiveness.one such innovation lies in the integration of nanoparticles into phase change materials (PCMs) to enhance their heat transfer capabilities, making them ideal candidates for solar heat absorption applications. This paper delves into the significance of nanoparticles in PCMs as heat transfer fluids …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 57–65 Read article
-
Experimental Investigation of Heat Transfer Rates in Water Coils Under Various Flow Conditions
Abstract: This study investigates the influence of various flow conditions on heat transfer rates in water coils through experimental analysis. Water coils, crucial for efficient thermal management in industrial applications, were tested under different flow rates and orientations to assess their impact on heat transfer performance. The experiment involved measuring heat transfer coefficients and pressure drops for coils subjected to flow rates ranging from 0.5 to 5 L/min and comparing results …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 11, Issue 2, 2024 · pp. 36–42 Read article
-
Enhancing Efficiency and Adaptability of Double Pipe Heat Exchangers: Design and Implementation Perspectives
Abstract: The present study focuses on exploring the intricacies of twin pipe heat exchangers, highlighting their versatility and efficiency in various industrial applications. Twin pipe heat exchangers consist of concentric pipes through which fluids flow in opposite directions, enabling effective heat transfer across significant temperature gradients. This design is particularly advantageous in scenarios involving low flow rates or highly viscous fluids, as well as moderate heat loads. One of the key …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 1, 2025 · pp. 63–70 Read article
-
Modeling and Simulation of Radiative MHD Casson-Type Polymer Composite Flow over a Porous Wedge with Variable Thermal Source and Sink
Abstract: This study presents a numerical investigation of the radiative magnetohydrodynamic (MHD) flow and heat transfer characteristics of a Casson-type polymer fluid over a moving and extending porous wedge under the influence of a spatially varying heat source and sink. The Casson fluid model, representing a class of viscoplastic polymeric materials, is analyzed within the MHD framework to explore the combined effects of magnetic field intensity, rheological behavior, and porous medium …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 837–850 Read article
-
IoT-Enabled Polymer–Gel PCM Composites for Intelligent Thermal Management in Solar Facade Applications
Abstract: The present study investigates the development of a multifunctional polymer–gel phase change composite designed for solar façade applications with integrated real-time thermal monitoring capability. A crosslinked polyvinyl alcohol–borax matrix was employed as a three-dimensional polymer scaffold to encapsulate paraffin-based phase change material, ensuring leakage-free operation and structural integrity under repeated thermal cycling. Graphite nanoplatelets were incorporated as thermally conductive nano-fillers to enhance heat transfer through the polymer composite via percolation-driven …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 99–111 Read article
-
Study and Thermal Analysis of a Rectangular Duct with Z-shaped Baffle Using Ansys
Abstract: This project aims to enhance heat transfer in a rectangular duct by utilizing Z-shaped baffles. It involves creating a 3D CAD model using SolidWorks and validating it in ANSYS Fluent 2019 R2. The study focuses on analyzing the effect of baffle arrangement, height, and angle on heat transfer rate. Comparative analysis is conducted between rectangular ducts with a 60° angle and heights of 4 mm, 6 mm, and 8 mm. …
Published in International Journal of Energy and Thermal Applications · Vol. 1, Issue 2, 2023 · pp. 14–30 Read article