Search
163 articles for “effective thermal conductivity”
-
Design of Experiments of an Effective Thermal Conductivity of Composite Matrix by using Numerical Simulation
Abstract: Effective thermal conductivities of fillers and matrix reinforced composite models are analysed by using Finite Element (FE) simulation. The process parameters of different filler concentrations, filler piece arrangements and thermal conductivity ratio are analysed by Design of Experiment. In this study, simulation based on fully replicable five -factor, five-level central composite design. Regression models are developed to analyze the effects of process parameter. The responses are analyzing the direct and …
Published in Recent Trends in Fluid Mechanics · Vol. 6, Issue 2, 2019 · pp. 1–18 Read article
-
Thermo-Fluid Characterization of Corrugated U-Tube Shell-and-Tube Heat Exchanger with Polymer Composite Tube Wall: A Combined CFD and Experimental Investigation
Abstract: Shell-and-tube heat exchangers built with metallic tubes work well thermally, but corrosion problems, extra weight, and the inability to adjust the wall’s thermal properties through material choice remain genuine engineering headaches, particularly for corrosive or weight-critical applications. Over the past few years there has been a fair amount of interest in replacing metal tubes with polymer composite alternatives, since blending thermally conductive fillers — graphite nanoplatelets, boron nitride platelets and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Role of Filler-Polymer Interface on the Thermal Conductivity in Polymer Composites
Abstract: Polymers with high thermal conductivity are the need of modern technologies due to their robustness, cost-effective, and less corrosiveness. However, bare polymers are not good heat-conductors due to their molecular structures, and their non-metallic properties. Therefore, metallic fillers of different shape and size have been used to enhance the thermal conductivity in polymer-composites. However, there has been search of best geometrical fillers which can maximize the thermal conductivity effectively with …
Published in Journal of Polymer & Composites · Vol. 8, Issue 1, 2020 · pp. 53–70 Read article
-
Effect of Ply Orientation on Thermal Erosion and Conductivity of Silica Phenolic Composites Under Oxy-Acetylene Flame
Abstract: The thermal and erosion performance of fiber-reinforced composites is highly sensitive to fiber architecture, matrix chemistry, and processing techniques, factors that have shaped development of advanced thermal protection systems (TPS) over past two decades. Silica phenolic (SP) composites, in particular, are widely employed in aerospace and defense applications due to their flame resistance, char stability, and ability to withstand severe thermal shock. However, optimizing thermal conductivity while improving erosion resistance …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 273–283 Read article
-
Thermo-Hydraulic Enhancement of Annular Finned Shell-and-Tube Heat Exchangers Using Epoxy-Based Polymer Composites: A Material–Geometry Coupled CFD Investigation
Abstract: Shell-and-tube heat exchangers remain a backbone of industrial thermal systems, yet their performance is often limited by relatively low shell-side heat transfer and the weight and cost associated with conventional metallic components. In this context, the integration of polymer composite materials offers a promising pathway toward lightweight, corrosion-resistant, and performance-tunable heat exchanger designs. The present study investigates the thermo-hydraulic performance of a straight-tube shell-and-tube heat exchanger equipped with annular fins, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 669–684 Read article
-
Influence of Epoxy-Based Thermally Conductive Polymer Composites on the Thermo-Hydraulic Performance of Finned Helical Coil Heat Exchangers Across Flow Regimes
Abstract: The use of polymer composites in heat exchanger applications has gained increasing attention due to their advantages in weight reduction, corrosion resistance, and design flexibility. However, their relatively low thermal conductivity compared to conventional metallic materials remains a key limitation for efficient heat transfer. In this study, the thermo-hydraulic performance of a finned helical coil heat exchanger is investigated with particular focus on epoxy-based polymer composites reinforced with thermally conductive …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 586–602 Read article
-
Corrugated Tube Shell-and-Tube Heat Exchanger Using Epoxy-Based Polymer Composite Coatings for Lightweight and Efficient Thermal Systems
Abstract: Corrugated tube geometries are widely recognized for their ability to enhance heat transfer through boundary layer disruption and secondary flow generation. In this study, a combined experimental and computational investigation is carried out to evaluate the thermo-hydraulic performance of a shell-and-tube heat exchanger incorporating corrugated stainless steel tubes integrated with an epoxy-based polymer composite coating and housed within a mild steel shell. Unlike conventional metallic systems, the present work introduces …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 603–617 Read article
-
Experimental and CFD Investigation of an Epoxy-Based Thermally Conductive Polymer Composite U-Tube Shell-and-Tube Heat Exchanger: A Lightweight Alternative to Conventional Metal Systems
Abstract: Shell-and-tube heat exchangers continue to play a critical role in industrial thermal systems; however, their conventional design based on fully metallic materials often leads to challenges related to weight, corrosion, and cost. In recent years, thermally conductive polymer composites have emerged as promising alternatives, offering improved corrosion resistance and design flexibility. In this study, the thermo-hydraulic performance of a U-tube shell-and-tube heat exchanger is investigated by partially replacing conventional metallic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 685–700 Read article
-
AI-Enabled Optimization of Additively Manufactured Composite Materials for Enhanced Mechanical and Thermal Performance
Abstract: This paper discusses the optimization of multi-objective optimization of enhanced coupling of heat and mechanical properties of 3D printed polymer composite materials by artificial intelligence (AI), as a component of a multi-objective optimization framework. It aims at development of nonlinear printing parameters and material properties relationships to achieve maximum tensile strength and thermal conductivity in polymer composites produced through fused deposition modeling (FDM). Short carbon fiber reinforcement was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 867–891 Read article
-
Experimental Investigation on Thermal Conductivity and Viscosity of Phase Change Material (NaNOᴣ and KNOᴣ) with Different Concentrations of ZnO Polymer Nanofluids for Solar Energy Absorption
Abstract: When evaluating the effectiveness of solar heat absorption methods or solar thermal energy storage systems (TESS), heat transfer fluid is a crucial element. Thermal conductivity and usable heat obtained for any industrial or immediate power plant efficiency are improved by the distinctive refining of Heat Transfer Fluid (HFT). The phase change material used in this study, known as solar salt is a blend of 60% NaNO3 and 40% KNO3. It …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 25–35 Read article
-
Effect of Mould Cavity Thickness on Cooling Rate of Aluminium with Temperature Dependent Properties
Abstract: Solidification study of aluminium with temperature dependent thermal properties has been conducted. Effect of the mould cavity wall thickness on the cooling rate has been the target in the present work. Casting is earliest metal shaping process and has been used in many industries and households. Solidification during casting is the most crucial event which has been studied by the many researchers because it affects the quality of the casting …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 1, 2016 · pp. 31–35 Read article
-
Performance Testing of Arduino-Based Hybrid Solar Dryer for Drying Apple Slices
Abstract: A novel and high-efficiency hybrid solar dryer was designed and developed in this study to dry apple slices. The thermal analysis of the dryer is conducted by calculating collector efficiency, drying rate, and drying efficiency. Integrating an Arduino-based temperature and humidity monitoring system in a hybrid solar dryer enhances the ability to optimize performance and efficiency. Both the collector and drying chamber are made of aluminum sheet as it has …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1872–1886 Read article
-
Development of a Polymer-Encapsulated IoT-Based Sensor for Thermal and Electrical Protection of EV Batteries
Abstract: Electric Vehicles (EVs) mark a critical shift toward sustainable transportation, with Battery Management Systems (BMS) playing a vital role in ensuring battery safety, reliability, and efficiency. The proposed BMS in this project incorporates real-time charge monitoring, temperature sensing, and fire detection capabilities to address safety concerns associated with lithium-ion batteries. Key features include current and voltage tracking, State of Charge (SoC) estimation, fault detection, and a user-friendly LCD interface. By …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 582–591 Read article
-
A systematic Review on Laterite based geopolymer
Abstract: Laterite based geopolymer has been widely studied as a sustainable alternative to Portland cement in construction industry. However, its thermal performance is still a challenge due to the low thermal conductivity and low temperature resistance. In this paper, recent studies on the improvement of thermal performance of laterite based geopolymer using additives are reviewed. The additives studied include organic materials, metal oxides and natural fillers. The effect of these additives …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 172–183 Read article
-
An Experimental Investigation towards Optimizing the Geometry and Material of Vortex Tube
Abstract: The main interest of this study is to know the effect of tube material having different thermal conductivities, on the performance of the vortex tube energy separation. Also, the study evaluates the optimal tube length to diameter ratio (L/D) and the effect of inlet pressure on the performance of the vortex. Experimentation consists of three different tube materials, Acrylic, Aluminium and Copper. By maintaining the tube diameter 20 mm as …
Published in Journal of Thermal Engineering and Applications · Vol. 6, Issue 2, 2019 · pp. 1–9 Read article
-
Thermo-Mechanical and Electrical Properties of Multi-Walled Carbon Nanotube-Enhanced Polyimide Composites for Aerospace Thermal Protection Systems
Abstract: Advanced aerospace thermal protection systems (TPS) require multifunctional materials that simultaneously provide high thermal stability, mechanical strength, and reliable electrical performance. Polyimide (PI) is widely used in aerospace structures due to its lightweight design and exceptional thermal durability, yet its low thermal conductivity and insulating behavior limit its effectiveness in heat dissipation and electromagnetic interference (EMI) shielding applications. This study addresses these limitations by developing multi-walled carbon nanotube (MWCNT)-reinforced polyimide …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 966–982 Read article
-
Advanced Functional Nanocomposites: Graphene Oxide Integration into Polyvinyl Alcohol Matrix
Abstract: This research explores how incorporating graphene oxide (GO) into polyvinyl alcohol (PVA) can improve its mechanical and thermal characteristics, with the goal of creating multifunctional nanocomposites suitable for advanced technological applications. GO was introduced into the PVA matrix at 0.5, 1, and 2 wt% via a scalable solution casting method. The resulting nanocomposites were characterized mechanically, thermally, and spectroscopically. Tensile testing revealed a significant improvement in mechanical performance, with tensile …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 50–59 Read article
-
Thermo-Hydraulic Performance of a Double-Pipe Double-Pass Heat Exchanger using Annular Fins and Graphite-filled Epoxy Composite Tubes
Abstract: Double-pipe heat exchangers remain one of the most widely adopted thermal devices because of their simple construction, operational reliability, and ease of maintenance. Nevertheless, their performance is often constrained by the limited heat transfer area of smooth tubes and the long-term challenges associated with metallic materials, including corrosion, scaling, and structural weight. Recent advances in thermally conductive polymer composites provide an opportunity to overcome these limitations by replacing conventional metals …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Chemical Synthesis, Spectral Characterization and Electrical Conductivity Behavior of Poly(2-Methoxyaniline-Co-2-Chloroaniline) and its CuO Nanocomposite and Polypropylene Glycol Blend
Abstract: AbstractCopolymerization of 2-chloro aniline and 2-methoxy aniline was achieved chemically by oxidative polymerization technique using ammonium persulphate as the oxidizing agent in acidic medium in the presence of sodium lauryl sulphate, an anionic surfactant. Copolymerization was also carried out in the absence of the surfactant to study the effect of surfactant on the thermal stability and electrical conductivity. The copolymer composite with CuO nano particles and blend with poly propylene …
Published in Journal of Polymer & Composites · Vol. 6, Issue 3, 2018 · pp. 1–13 Read article
-
Investigation to Enhance Performance of Finned U-Tube Shell-and-Tube Heat Exchangers Using Epoxy Based Polymer Composite Material
Abstract: Shell-and-tube heat exchangers remain indispensable in thermal engineering systems; however, conventional metallic configurations often face challenges related to corrosion, weight, and limited thermal optimization. In this study, a novel approach is proposed by integrating epoxy-based polymer composite materials with finned U-tube geometries to enhance thermo-hydraulic performance while addressing material limitations of traditional systems. The work focuses on the development and evaluation of a hybrid heat exchanger comprising a mild steel …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 618–633 Read article