Search
252 articles for “durability and performance enhancement”
-
Enhanced Durability and Performance of Reinforced Concrete Beams through CFRP Wrapping: An Experimental Investigation
Abstract: Globally, maintaining and repairing aging reinforced concrete structures poses a significant challenge for the construction industry. Numerous structures built before modern earthquake-resistant design codes lack adequate seismic resilience. Additionally, evolving service requirements often necessitate strengthening existing structures to handle increased loads. While past research explored the effectiveness of various Fiber Reinforced Polymer (FRP) wrappings under specific conditions, limited studies have comprehensively compared the performance of Carbon Fiber Reinforced Polymer (CFRP) …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 37–49 Read article
-
Study on Evaluation of Mechanical Properties of Kerb Stone Incorporating Polypropylene Material for Enhanced Durability and Performance
Abstract: This study evaluates the mechanical properties of kerb stone incorporating polypropylene (PP) material, to enhance durability and performance. In the wake of increasing environmental concerns and the need for sustainable construction practices, the reuse of plastic waste, particularly polypropylene, has emerged as a promising solution. Polypropylene, known for its durability, resistance to chemical attacks, and low water absorption, offers significant potential when integrated into concrete products. In this research, standard …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 73–84 Read article
-
Enhancing Mechanical and Durability Performance of Composite Material Using Egg Shell Powder and Copper Slag.
Abstract: This research aims to investigate the use of copper slag (CS) and Egg Shell Powder (ESP) as partial substitutes in polymer composite to enhance mechanical properties and durability. Considering that the construction sector is recognized for consuming a significant amount of resources in comparison to other industries, its further expansion poses a direct danger to resource availability. This could disrupt ecosystems, lower biodiversity, and have an effect on riverine and …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 1–7 Read article
-
Future Fibers for the Airport Engineering
Abstract: This paper explores the use of advanced fibers in drone technology, with a specific focus on textiles for drone body structures. As drones continue to evolve, selecting materials that enhance performance, durability, and sustainability has become increasingly critical. Traditionally, drone components rely on resin-based composites for strength and rigidity. However, recent advancements demonstrate that certain fibers can achieve exceptional structural performance without the need for resin. The study emphasizes materials …
Published in Journal of Aerospace Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 14–18 Read article
-
Advanced Polymer Composites for Dental Applications: A Study on Twin Wire Tucker Mechanism
Abstract: This study explores the development of advanced polymer composites for dental applications, particularly focusing on the twin wire tucker mechanism. The study investigates the polymer chemistry underlying the mechanical properties of polymer-based dental instruments, emphasizing the stability, flexibility, and ergonomic benefits of polymer composites in orthodontic applications. The incorporation of reinforced polymers into dental instruments aims to enhance performance, durability, and patient comfort. By integrating high-strength polymers with superior biocompatibility, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 1–6 Read article
-
Development of a Durable Superhydrophobic EP/PDMS Coating Reinforced with Micro-CaCO₃ and Nano-ZnO for Enhanced Corrosion Protection and Multifunctional Performance on Carbon Steel
Abstract: Balancing exceptional multifunctional performance with mechanical robustness in micro-nano composite films remains a significant challenge for practical applications. In this work, a superhydrophobic coating reinforced with micro-CaCO₃ and nano-ZnO particles was fabricated through a versatile single-step brushing method. The optimized EP/PDMS@micro-CaCO₃/nano-ZnO coating achieved a water contact angle (WCA) of 173.54° ± 2.53° and a sliding angle (SA) of 1.50° ± 1.12°. Owing to its carefully engineered micro-nano hierarchical structure, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 216–238 Read article
-
Influence of Nozzle Temperature, Nozzle Diameter, and Layer Height on Tensile and Hardness Characteristics of 3D Printed CF-PLA
Abstract: This research investigates the mechanical characterization of CF-PLA (Carbon Fiber-reinforced Polylactic Acid) composite material produced using Fused Deposition Modeling (FDM) technology. The study investigates the impact of different machine parameters, like nozzle temperature, nozzle diameter, and layer height, on the tensile property and hardness of CF-PLA specimens. A total of 27 samples were produced, each with different combinations of nozzle temperature (190°C, 200°C, and 210°C), nozzle diameter (0.4mm, 0.5mm, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 674–681 Read article
-
Experimental Study on the Strength Enhancement of Carbon Fiber Reinforced GGBS Concrete
Abstract: This study provides an in-depth analysis of the experimental investigation conducted on carbon fiber reinforced GGBS concrete (CFRGC). The primary objective of the research was to evaluate the effects of carbon fibers on various mechanical properties of concrete, with a particular focus on strength parameters. In this study, the carbon fiber content was systematically varied from 0.5% to 1.5% by weight of cement, in increments of 0.5%, to determine the …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 36–50 Read article
-
Self Healing Material: An Introduction
Abstract: Self-healing materials have emerged as a transformative innovation for sustainable infrastructure and advanced applications such as wearable electronics and smart transportation systems. These materials possess the intrinsic ability to repair damage autonomously or with minimal external intervention, thereby extending service life and reducing maintenance costs. Inspired by biological systems, self-healing mechanisms are broadly classified into extrinsic approaches, such as microcapsule and vascular networks based healing, and intrinsic mechanisms involving reversible …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 604–611 Read article
-
Effectiveness of PTFE-Based Nano-coatings in Improving Corrosion and Wear Resistance of Stainless Steel
Abstract: Polytetrafluoroethylene (PTFE) has emerged as a highly effective material for enhancing the durability and performance of metal surfaces, particularly in environments requiring superior corrosion resistance and low friction. This study investigates the application of PTFE coatings on various metallic substrates, with a focus on stainless steel and carbon steel, to improve their corrosion resistance, wear protection, and tribological performance. Utilizing advanced deposition techniques such as sol-gel and plasma spray, PTFE …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 2, Issue 2, 2024 · pp. 32–38 Read article
-
Simulation and Analysis of Battery Pack Using the Multi Scale Multi-Domain Battery Model
Abstract: The creation of sophisticated simulation models has been made necessary by the need for reliable and effective battery packs in energy storage systems and electric vehicles. This study focuses on the simulation and analysis of battery packs using a multi-scale multi-domain battery model. The model enables a thorough knowledge of battery pack behavior across a range of operating situations by integrating the electricity, thermal, and mechanical domains. Multi-scale modeling bridges …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 2, Issue 2, 2024 · pp. 31–46 Read article
-
A Comprehensive Analysis of Coating Technology and Thin Films
Abstract: In contemporary materials science, thin film and coating technologies are essential because they allow for the improvement of surface characteristics, including electrical conductivity, hardness, corrosion resistance, and optical performance. These technologies use physical, chemical, or hybrid deposition techniques to deposit materials in layers that range in thickness from a few nanometres to several micrometres, depending on the required functional properties and application areas. The content, thickness, and microstructure of films …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 50–64 Read article
-
Influence of Agricultural Waste Materials in Concrete: A Sustainable Approach
Abstract: Urbanization and resource depletion have intensified the need for sustainable alternatives to traditional construction materials. The concrete industry, a major contributor to environmental issues due to cement production, is turning to waste materials to mitigate its impact. This review paper focuses on the use of agricultural waste as a partial replacement for cement and aggregates in high-strength concrete (HSC), with an emphasis on its influence on both fresh and hardened …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 26–32 Read article
-
Corrugated Tube Shell-and-Tube Heat Exchanger Using Epoxy-Based Polymer Composite Coatings for Lightweight and Efficient Thermal Systems
Abstract: Corrugated tube geometries are widely recognized for their ability to enhance heat transfer through boundary layer disruption and secondary flow generation. In this study, a combined experimental and computational investigation is carried out to evaluate the thermo-hydraulic performance of a shell-and-tube heat exchanger incorporating corrugated stainless steel tubes integrated with an epoxy-based polymer composite coating and housed within a mild steel shell. Unlike conventional metallic systems, the present work introduces …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 603–617 Read article
-
Emerging Trends in Membrane-Based Gas Separation Technologies
Abstract: Membrane technology has emerged as a groundbreaking solution in various fields, revolutionizing industries such as water treatment, energy production, biomedicine, and environmental protection. Over the past few decades, significant advancements have been made in membrane materials, fabrication techniques, and performance optimization. With the growing global demand for efficient and sustainable separation processes, research has increasingly focused on enhancing membrane permeability, selectivity, and durability to improve performance across various industries, including …
Published in International Journal of Membranes · Vol. 2, Issue 1, 2025 · pp. 16–22 Read article
-
Biomedical Coatings: Surface Engineering for Enhanced Biocompatibility and Performance
Abstract: Biomedical coatings have become essential in modern healthcare, significantly improving the performance, durability, and biocompatibility of medical implants and devices. These coatings serve multiple functions, including reducing infection risks, enhancing osseointegration, promoting tissue integration, and enabling localized drug delivery. Advances in surface engineering have led to the development of innovative coatings with superior properties such as antimicrobial resistance, bioactivity, and controlled biodegradation. Various materials are employed in biomedical coatings, including …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 1, 2025 · pp. 8–15 Read article
-
Development of Bio-Based Polymer Composites for Sustainable Construction Materials
Abstract: The demand for eco-friendly sustainable construction materials has gained significant interest in the development of bio-based polymer composites as ecologically suitable alternatives to traditional petrochemical-based polymer composites. The environmental problems associated with non-biodegradable, high-carbon-footprint polymer composites make their more bio-based counterparts an attractive option that offers both environmental and structural benefits. To evaluate environmental impact and industrial feasibility, a comprehensive life cycle assessment was performed. The methodology adopts optimized bio-based …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 194–208 Read article
-
Advancements in Engine Oil Durability, Performance, and Diagnostics
Abstract: The depletion of fossil fuels and environmental concerns have driven the search for alternative fuels and enhanced lubricants. This article explores advancements in machine oil durability, focusing on vegetable oil modifications, synthetic lubricants, and diagnostic methods for marine engine oils. A study comparing Karanja oil blends with mineral diesel in direct injection compression ignition engines revealed comparable wear characteristics and reduced metallic debris for Karanja oil-fueled engines. Investigations on synthetic …
Published in Journal of Petroleum Engineering & Technology · Vol. 14, Issue 3, 2024 · pp. 39–45 Read article
-
Development of Lightweight Chassis and Efficient Drivetrain for Formula Student Applications
Abstract: The chassis and drivetrain of a Formula Student vehicle are designed, analyzed, and optimized in this research study with an emphasis on manufacturability, performance, and safety. The project emphasizes the use of advanced engineering tools such as SolidWorks for computer-aided design (CAD) and ANSYS for structural analysis to evaluate the chassis under various dynamic conditions. The primary objective is to ensure that the driver remains safe inside the cockpit while …
Published in Journal of Automobile Engineering and Applications · Vol. 12, Issue 3, 2025 · pp. 1–17 Read article
-
Enhancing Concrete Performance Through Ternary Mixtures: Utilizing SCBA and Silica Fume for Sustainable Construction
Abstract: This study investigates the effects of incorporating Sugarcane Bagasse Ash (SCBA) and Silica Fume (SF) as supplementary cementitious materials on the properties of concrete. Compressive strength, split tensile strength, and water absorption characteristics of ternary blended concrete mixes containing varying proportions of SCBA and SF were examined at curing periods of 7, 28, and 56 days. The results reveal that up to 15% SCBA replacement and 10% SF addition led …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 1, 2024 · pp. 6–12 Read article