Search
188 articles for “base fluid.”
-
Research on Numerical Simulation of Fluids Based on BIM Boundary Conditions in the Lower Fazi River in Taichung
Abstract: Building Information Model (BIM) application in Taiwan, After sorting out the literature, it is found that the water conservancy field is less used, Computer processing technology is becoming more and more mature, Engineering fluid simulation software has various parameter control and high precision, Simulation channel analysis can be controlled by establishing the edge model to control the water conservancy factor, In this study, BIM was introduced into the river section …
Published in Journal of Water Resource Engineering and Management · Vol. 8, Issue 3, 2021 · pp. 1–18 Read article
-
Performance Evaluation of Vegetable Oil Based Cutting Fluids with Extreme Pressure Additive in Turning of AISI 1040 Steel
Abstract: Vegetable oils are being investigated as a potential source of environmental favorable lubricants, due to high biodegradability, renewability and good lubrication properties. The objective of this work is to determine the influence of vegetable oil based cutting fluids (sesame and coconut oil) with extreme pressure (EP) additive on machining performance in terms of cutting forces, cutting tool temperature, tool flank wear and surface roughness during turning of AISI 1040 steel …
Published in Journal of Production Research & Management · Vol. 4, Issue 3, 2014 · pp. 8–14 Read article
-
Effect of hybrid plant-based cutting fluid in turning operation of EN19 steel and modelling of heat transfer equation for multiple phase colloids
Abstract: This article describes a project where an alternative to conventional Mineral Oil (MO) based cutting fluids is tried on the turning operation of steel samples. The deposit of petroleum is getting depleted day by day, the pollution due to fossil fuel is increasing exponentially and petroleum is getting more and more expensive. Due to these reasons, nonpetroleum (MO) based alternative cutting fluids have been in business for quite a while. …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 175–185 Read article
-
Synthesis and Experimental Evaluation of Graft Polymer Nanocomposite in Water Based Drilling Fluid System for Reactive Unconventional Reservoirs
Abstract: AbstractThis experimental work discusses the evaluation of polyacrylamide-grafted-gum arabic/carboxymethyl cellulose nanocomposite as a drilling mud additive for the drilling of reactive shale formations which may lead to wellbore instability. The synthesized nanocomposite was synthesized with free polymerization technique and it was characterized by XRD, FTIR, and FESEM. Then, it was preceded in the development of the WBDMS. Its effect on the rheological and filtration control properties of the formulated mud …
Published in Journal of Polymer & Composites · Vol. 5, Issue 2, 2017 · pp. 34–41 Read article
-
An Overview of Recent Advances in Viscoelastic Surfactant based Fracturing Fluid Technology
Abstract: High percentages of oil and gas wells are hydraulically fractured worldwide in order to make economically producible at an efficient production rate. Cross-linked polymer fluids are in use for decades to stimulate oil and gas wells. Even though these fluids exhibit exceptional viscosity, thermal stability, proppant transportability and fluid leak-off control; extensive formation damage by polymer residues demanded a clean fracturing fluid technology. New generation of fracturing fluids based upon …
Published in Journal of Petroleum Engineering & Technology · Vol. 2, Issue 1-3, 2012 · pp. 11–25 Read article
-
Biopolymer Substitution and Impact on Cuttings Transport of a Lightweight Water-Based Drilling Fluid
Abstract: The aim is to determine the impact of substitution of a local material for another, on rheological properties and hole cleaning capability. A local biopolymer Mucuna solannie was used as a substitute for another biopolymer, Detarium microcarpum, primarily as a viscosifier in a water-based drilling fluid. Tests were carried out using standard equipment and specifications. Variations in transport efficiency and required minimum fluid flow rate at same cuttings concentration (CC) …
Published in Journal of Petroleum Engineering & Technology · Vol. 7, Issue 2, 2017 · pp. 54–64 Read article
-
Experimental Analysis of the Effect of Fine Milled Husk of Rice as a Novel Filtration Control Agent for Water Based Drilling Fluid System
Abstract: Drilling operation is a complex process that requires integration of various engineering systems. As the drilling continues, the formation encountered offers challenges to wellbore integrity as pressure increases with depth. The influx of formation fluid is contained by the overbalance provided by weighted drilling fluid column. Another critical function of the mud is to restrict the filtration fluid lost to the formation by forming a suitable mud-cake around the wellbore. …
Published in Journal of Petroleum Engineering & Technology · Vol. 7, Issue 1, 2017 · pp. 4–8 Read article
-
Short Report on Polymer Based Automated Fluid Machines for Applications in Microfluidics
Abstract: In this experimental work, a couple of gradual expansion microchannels are fabricated by polymethylmethacrylate (PMMA) using the maskless lithography, hot embossing lithography and direct bonding technique. Dyed ethylene glycol and dyed water are the prepared working liquids. The CMOS camera catching 25 frames per second with a corresponding time-scale resolution of 0.04 second is used to record each surface-driven microfluidic flow of dyed ethylene glycol and dyed water in the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 11, Issue 2, 2021 · pp. 23–28 Read article
-
Aluminum Oxide Nanofluids Thermal Conductivity Enhancement Analysis: A Review
Abstract: Aluminum oxide nanofluids are enhanced heat transfer fluids that utilize the thermal conductivity of aluminum oxide (Al2O3) nanoparticles suspended within a base fluid. As technology advances, more efficient high heat flux solutions are required to manage the higher concentration of power in smaller designs. In this review paper, data from multiple experiments pertaining to the thermal conductivity of Al2O3 nanofluids will be presented. Information is compiled from peer reviewed and …
Published in Journal of Thermal Engineering and Applications · Vol. 9, Issue 2, 2022 · pp. 48–58 Read article
-
A Ponder & Sedulousness Of Legion Shale Stabilizing Materials In Aqueous Based Drilling Fluid During The Process Of Borehole Strengthening
Abstract: Drilling fluid used while drilling the layers of shale will have the potential of reacting with water which tends to increase stickiness, induce swelling and promote sloughing of the borehole. This results in the reduction of drilling fluid circulation, increased mud loss, increase in torque and drag, reduction in lubricity. This will ultimately result in the increase of Non-Productive Time (NPT) during drilling which in turn increases Capital Expenditure (CAPEX) …
Published in International Journal of Pollution: Prevention & Control · Vol. 1, Issue 2, 2023 · pp. 35–40 Read article
-
A Technical Review on Evaluation of Vegetable Oil in Water-Emulsion Cutting Fluid in Machining Steel with Coated Carbide Tool
Abstract: In metal cutting industries, Metal working fluids (MWFs) or Metal cutting fluids (MCFs) are used; they act as coolant as well as lubricant. In industries synthetic and petroleum based cutting fluid as well as coolant produce negative effect on human health, ecology and environment. When tool and work piece are engaged with each other while machining due to engagement they produce heat. The metal cutting fluids effect on heat generation …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 3, 2017 · pp. 26–34 Read article
-
Design and Implementation of a Polymer-Integrated IoT-Based Smart Intravenous Fluid Monitoring System for Patient Safety
Abstract: The intelligent healthcare systems rely more and more on the advanced materials and Internet of Things (IoT) technologies to improve patient safety, patient-centeredness, timeliness of care, clinical efficiency. This paper presents a polymer-enhanced IoT enabled automatic IV Fluid Level monitoring and notification system. The novel system is based on the use of polymer-encapsulated load-cell sensors and polymer-packaged electronic modules, which allow biocompatibility, long-term stability and easy sterilisation in medical environments. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 730–742 Read article
-
Short Review on the Probability of Carbon Nanotube Based Nanofluidics in Fluid Mechanics
Abstract: In this short review, author has briefly introduced the subject named as nanofluidics. Also, author has provided a short review on passive (surface-driven) capillary flow related to microfluidics. The effects of channel aspect ratio, surface wettability, liquid viscosity, effective viscosity, centrifugal force, and bend angle, are described to control the passive capillary flow in microfluidic devices and systems. Author has demonstrated the difference between leaky-device and non-leaky device in microfluidics. …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 3, 2020 · pp. 14–17 Read article
-
INVESTIGATION OF THERMAL CONDUCTIVITY OF SILVER NANOPARTICLES IN BASEFULID OF WATER ETHYLENE GLYCOL
Abstract: Nanotechnology is interface technologies that span many different science and applications area.When engineering, science and technology are conducted at the nanoscale is called asnanotechnology. It is about 1 to 100 nm (nano-meter) where nano denotes the scale range of onebillionth of meter. Nanotechnology refers the properties of atoms and molecules measuring 0.1 to1000 nm. Nanofluids are nothing but suspension of nanometer sized particles in the base of fluid.The base fluid …
Published in Journal of Thermal Engineering and Applications · Vol. 7, Issue 3, 2020 · pp. 13–19 Read article
-
Recent developments in Nano technology applications in direct absorbing solar collectors: A Review
Abstract: Solar energy harnessing is widely promoted amongst the nations so as to encourage environment conservation. Use of solar energy is very important in the context of global warming and decrease in carbon dioxide generations. Here it becomes important for the researchers to find new methods for optimum utilization of solar energy in collectors by design modifications thereby reducing heat losses along with considering the reductions in high initial costs. Addition …
Published in Journal of Thermal Engineering and Applications · Vol. 8, Issue 2, 2021 · pp. 23–34 Read article
-
Analysis on Heat Recovery of an Engine Radiator using (CH2OH)2 Based Nanofluid Having TiO2 Nano Particles
Abstract: Automobile engine produces high amount of heat in the process of combustion. This internal heat rises the temperature of engine to very high level and can damage or seize the engine parts. Hence for the safety of engine components, it needs to run at much lower temperature, which is called engine working temperature. Ethylene glycol based nanofluids are used as the working fluids for the radiator and Titanium Dioxide, Silver, …
Published in Journal of Thermal Engineering and Applications · Vol. 6, Issue 2, 2019 · pp. 10–23 Read article
-
A Particle-Derived Nonlinear Dynamical Framework for Bubble Oscillations: Reduced-Order Modeling, Bifurcation Analysis, and Optimal Stabilization
Abstract: Particle-based fluid simulation has emerged as a powerful computational framework for modeling complex multiphase flows involving large deformations, moving interfaces, and nonlinear fluid interactions that challenge conventional mesh-based approaches. In this work, a nonlinear dynamical systems framework is developed for particle-resolved bubble oscillations by constructing a reduced-order model that preserves the dominant physical mechanisms governing bubble interface evolution. The formulation represents the bubble dynamics through coupled radial and shape deformation …
Published in Recent Trends in Fluid Mechanics · Vol. 13, Issue 2, 2026 · pp. 11–33 Read article
-
Experimental Investigation on Heat Transfer Enhancement in Shell and Tube Heat Exchanger Using Graphene Nanofluids
Abstract: The paper focuses on the dispersion of Graphene nanoparticles in a water–ethylene glycol based fluid to investigate their impact on the convective heat transfer performance of the resulting nanofluid. Various concentrations of graphene nanoparticles were prepared, and the nanofluids were subjected to different ultrasonication durations to ensure proper dispersion and stability of the nanoparticles within the base fluid. The study involved extensive experimental evaluation to systematically analyze how the nanoparticle …
Published in Journal of Automobile Engineering and Applications · Vol. 12, Issue 3, 2025 · pp. 32–38 Read article
-
CFD Investigation of Volume Fraction of Nanofluid on Heat Transfer Rate in Micro Channel Heat Sink
Abstract: AbstractNew methods of removing heat from integrated chips of the electrical devices are very important. Mini channel liquid cooling is the new method by which we can remove heat from electrical devices easily. Uses of nanofluid in the mini channel liquid cooling is the experiment study. We investigated the effect of nanofluid on the heat transfer rate. We also investigated the effect of volume fraction of a nanofluid in the …
Published in Recent Trends in Fluid Mechanics · Vol. 4, Issue 3, 2017 · pp. 1–8 Read article
-
Polymer Chemistry in Flexible Dental Assemblies: Designing a Polymer-Based Composite Arm for Bio-Fluid Extraction Tube Support
Abstract: Polymer chemistry offers innovative solutions for designing flexible, durable assemblies in medical applications. This study explores an assembly for holding a bio-fluid extraction tube, featuring a flexible arm interpreted as a polymer composite, aimed at enhancing dental procedures. The assembly comprises a gooseneck-style arm—hypothesized as a rubber or fiber-reinforced polymer—connecting a first clamp (for anchoring to an object, e.g., dental chair) and a second clamp (securing the extraction tube). The …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 285–292 Read article